东滩煤矿水资源梯级利用处理工艺与模式研究

东滩煤矿水资源包括深井水和矿井水,根据水源水质特征,将深井水和矿井水处理后最终作为直饮水、井下生产用水、电厂循环冷却水、电厂化水车间用水。实现了水资源的梯级利用,节约了水资源,保护了矿区环境。文中介绍了直饮水处理、矿井水净化处理、矿井水深度处理、生活污水二级生化处理、生活污水深度处理的处理规模、进水和出水水质、工艺流程等内容,并给出了水资源梯级利用模式,供其他类似矿区借鉴。     

甘油基混合培养物合成PHA及其与OUR的关系

聚β羟基烷酸盐(PHA)以其较好的生物相容性、可生物降解性和再生性成为最有前途的生物高分子材料.本文基于甘油作为基质在饱食-饥饿模式下富集合成PHA的混培物,以乙酸、丙酸、丁酸、乳酸和葡萄糖作为基质考察混培物合成PHA的基质广谱性,结果表明乳酸和乙酸作为基质时PHA的产率系数较高;使用不同比例乙酸/丙酸混合基质时,PHA产量随着乙酸含量的增加而增大,乙酸/丙酸为3∶1时PHA产量最高.通过活性污泥同时贮存与生长模型模拟与线性回归两种方法证实,在单一基质或乙酸/丙酸混合基质情况下,PHA合成速率与OUR存在线性关系,因此,基于在线OUR测量数据可以实时估计PHA合成量.     

Inhibitory effects of nisin-coated multi-walled carbon nanotube sheet on biofilm formation from Bacillus anthracis spores

Multi-walled carbon nanotube（MWCNT） sheet was fabricated from a drawable MWCNT forest and then deposited on poly（methyl methacrylate） film. The film was further coated with a natural antimicrobial peptide nisin. We studied the effects of nisin coating on the attachment of Bacillus anthracis spores, the germination of attached spores, and the subsequent biofilm formation from attached spores. It was found that the strong adsorptivity and the super hydrophobicity of MWCNTs provided an ideal platform for nisin coating. Nisin coating on MWCNT sheets decreased surface hydrophobicity, reduced spore attachment, and reduced the germination of attached spores by 3.5 fold, and further inhibited the subsequent biofilm formation by 94.6% compared to that on uncoated MWCNT sheet. Nisin also changed the morphology of vegetative cells in the formed biofilm.The results of this study demonstrated that the anti-adhesion and antimicrobial effect of nisin in combination with the physical properties of carbon nanotubes had the potential in producing effective anti-biofilm formation surfaces.     

Carbonyl emissions from heavy-duty diesel vehicle exhaust in China and the contribution to ozone formation potential

Fifteen heavy-duty diesel vehicles were tested on chassis dynamometer by using typical heavy duty driving cycle and fuel economy cycle. The air from the exhaust was sampled by 2,4- dinitrophenyhydrazine cartridge and 23 carbonyl compounds were analyzed by high performance liquid chromatography. The average emission factor of carbonyls was 97.2 mg/km, higher than that of light-duty diesel vehicles and gasoline-powered vehicles. Formaldehyde, acetaldehyde, acetone and propionaidehyde were the species with the highest emission factors. Main influencing factors for carbonyl emissions were vehicle type, average speed and regulated emission standard, and the impact of vehicle loading was not evident in this study. National emission of carbonyls from diesel vehicles exhaust was calculated for China, 2011, based on both vehicle miles traveled and fuel consumption. Carbonyl emission of diesel vehicle was estimated to be 45.8 Gg, and was comparable to gasolinepowered vehicles （58.4 Gg）. The emissions of formaldehyde, acetaldehyde and acetone were 12.6, 6.9, 3.8 Gg, respectively. The ozone formation potential of carbonyls from diesel vehicles exhaust was 537 mg O3/km, higher than 497 mg O3/km of none-methane hydrocarbons emitted from diesel vehicles.     

Quantitative method to determine the regional drinking water odorant regulation goals based on odor sensitivity distribution：Illustrated using 2-MIB

Taste and odor （T/O） in drinking water often cause consumer complaints and are thus regulated in many countries. However, people in different regions may exhibit different sensitivities toward WO. This study proposed a method to determine the regional drinking water odorant regulation goals （ORGs） based on the odor sensitivity distribution of the local population. The distribution of odor sensitivity to 2-methylisobomeol （2-MIB） by the local population in Beijing, China was revealed by using a normal distribution function/model to describe the odor complaint response to a 2-MIB episode in 2005, and a 2-MIB concentration of 12.9 ng/L and FPA （flavor profile analysis） intensity of 2.5 was found to be the critical point to cause odor complaints. Thus the Beijing ORG for 2-MIB was determined to be 12.9 ng/L. Based on the assumption that the local FPA panel can represent the local population in terms of sensitivity to odor, and that the critical FPA intensity causing odor complaints was 2.5, this study tried to determine the ORGs for seven other cities of China by performing FPA tests using an FPA panel from the corresponding city. ORG values between 12.9 and 31.6 ng/L were determined, showing that a unified ORG may not be suitable for drinking water odor regulations. This study presents a novel approach for setting drinking water odor regulations.     

便携β射线法手工监测PM_(2.5)的可行性研究

提出利用自动射线原理结合重量法的简捷便携特点的便携射线仪手工监测PM2.5的思路,平行比对了便携射线法和手工重量法所测60组PM2.5浓度的监测结果,采用线性回归及T检验、F检验等理论分析了两者数据结果间的有效性和可比性。结果表明,便携式射线仪监测结果与重量法监测结果之间有效可比且得到了两者间的线性回归方程;此外进行了20组数据的实样验证,换算值和真值之间相对误差在8%以内,因而确定了便携射线仪手工监测PM2.5的可行性。     

丹东生态环境监测业务系统设计与实现

丹东生态环境监测业务系统是用于生态环境监测日常业务观测,编制各类观测报文及数据上网传输的实用型业务系统。系统采取多窗157结构框架,合理布局功能窗口界面,兼容了地面气象观测数据文件格式,统一数据检查标准,观测数据处理更为准确有效。并以VB6．0可视化语言为开发工具适应不用版本Windows操作系统。基于生态环境监测数据统计、数据分析和数据发布为一体的多功能业务应用软件。     

低温柴油吸收工艺在高温油品储罐罐顶废气净化中的应用

采用罐区减排措施和低温馏分油吸收-脱硫工艺处理高温油品罐罐顶废气,在处理气量43.0~384.5 m3/h,柴油流量10~20 m3/h,吸收柴油温度10~15℃条件下,废气经过净化后,硫化氢和有机硫化物去除率大于97.2%,净化气体非甲烷总烃浓度小于8.35 g/m3,均低于GB20950-2007《储油库大气污染物排放标准》和GB 16297-1996《大气污染物综合排放标准》中相关污染物的限值。     

热强化气相抽提对不同质地土壤中苯去除的影响

研究应用电阻加热强化气相抽提技术对砂土、壤土和黏土中苯去除效果的影响及作用机制.与常规抽提结果相比,在热强化处理作用下气相抽提对砂土和壤土中苯的去除效率提高了13.1%和12.3%,处理时间分别降低75%和14%.热强化处理使得黏土含水率下降,土壤渗透率升高,黏土颗粒表面羧基和乙基的吸收峰消失,有机质含量减少,苯的去除效率与对照相比提高了34%.对于砂土和壤土,热强化主要是通过促进苯在土体中扩散来提高去除效率,从而实现在较短时间内污染物质的大量去除;而对于黏土则是通过降低土壤颗粒表面有机基团的含量,从而降低污染物和土壤颗粒的吸附能力,并通过降低含水率和升高渗透率从而提高土壤中气体的扩散性能,以达到增强气相抽提效果的目的.     

介质阻挡放电中添加乙炔对NO脱除的影响

利用介质阻挡放电(DBD)进行模拟烟气脱除NO实验,通过改变乙炔体积分数和烟气水蒸汽含量研究添加乙炔对NO脱除效率的影响.结果表明:烟气中添加乙炔强化了NO氧化作用,随着乙炔体积分数的提高,NO脱除率逐渐增加.在NO/N2/O2/C2H2/H2O体系中,水的电负性和离解反应消耗大量高能电子,降低了活性自由基的生成,NO脱除速率随之减慢;能量密度低于400 J·L-1时,相对湿度(RH)为0的情况下脱出效果最好.但随着能量密度的增加,H2O不会影响最终的NO脱除率;H2O的添加可以产生更多的·OH自由基,促进NO2向HNO3转化,使出口NO2浓度大幅度降低.