A New Approach to Chemical Recycling of Polyamide 6.6 and Synthesis of Polyurethanes with Recovered Intermediates

A new efficient method for the chemical decomposition of polyamide 6.6 by the glycolysis and amino-glycolysis processes was proposed. The glycolysis was conducted using the mass excess of ethylene glycol (EG) as a decomposing agent in the presence of a catalyst. Also, a mixture of EG and triethylenetetramine was used as another decomposing agent in the amino-glycolysis process. The described process of decomposition did not require the use of elevated pressure. The hydroxyl and amine numbers, rheology behavior and the presence of characteristic chemical groups in the obtained glycolysates and aminoglycolysates were determined in order to characterize the reaction products. The decomposition products were defined as non-Newtonian fluids that could be described by suitable mathematical models. The conducted studies showed that the properties of the obtained intermediates depend on the mass excess of the decomposing agent used. The resulting semi-products are suitable for reusing in the synthesis of polyurethanes, which has been confirmed by the exemplary synthesis. In the reaction, 10 and 15 wt% of commercial polyol were replaced with the recovered intermediates.     

Mine rescuers’ heat load during the expenditure of physical effort in a hot environment,using ventilated underwear and selected breathing apparatus

Mine rescuers’ heat load under the same physical effort load (25% of the maximal oxygen uptake), using three types of breathing apparatus, in newly developed heat-removing underwear and outerwear was assessed for typical work conditions of mine rescuers, under milder and harsher ambient conditions of 32 and 38?°C, respectively, both at relative humidity of 85% and air velocity of 1.0?m/s. Expending physical effort at the same load while using different kinds of breathing apparatus resulted in a similar heat load. Under both milder and harsher ambient conditions, heat storage and sweating intensity were greater than the average limit value recommended by hygienic standards, which indicates that the use of breathing apparatus significantly hinders heat exchange with the environment. The developed clothing for mine rescuers was highly rated, and was considered by most people to be better than that used currently.     

An experimental and a numerical study of horizontal earth-air heat exchanger in a hot climate

Earth-air heat exchangers (EAHE) are devices used in the geothermal technique in order to reduce energy consumption in buildings. In this study, a simulation was conducted through the computational fluid dynamics platform FLUENT 6.3 for the prediction of thermal performance of the EAHE that describes the variation of the air temperature inside the tube. For this, it was necessary to design the heat exchanger while respecting the design and the actual dimensions of the experimental set-up, and stating that the temperature of the wall of the horizontal tube of the exchanger is equal to that of ground at 3 m depth. It should be noted that in assessing the temperature along the two sections vertical (input and output) of the exchanger, opting for a function (UDF) the user define function. Finally, noting a good agreement between both experimental and numerical study, and showing that a significant reduction in temperature at the outlet of the exchanger to a difference of 20 °C, confirming the effectiveness of the heat exchanger.     

Androgens,oestrogens, and progesterone concentrations in wastewater purification processes measured with capillary electrophoresis

A novel analytical-scale concept to improve reliability of detection and analysis of natural and processed wastewater samples from a purification plant was developed. A sequential sample clean-up system of polymer-based octadecyl and silane-based quaternary amine sorbents were used for concentrating human based steroid hormones and their metabolites and detecting them by UV absorption with capillary electrophoresis (CE). The water samples were collected from influent and effluent processes of the water purification plant in Helsinki, Finland.The CE methods were partial-filling micellar electrokinetic chromatography and capillary zone electrophoresis. The analysis times and method concentration levels were optimized with eight steroids at the range of 0.5–10 mg/L. Since in CE the detectable quantities were higher than the existing amounts in the process waters, the real samples needed matrix removal combined with steroid enrichment. After 20,000-fold concentration testosterone-glucoside, androstenedione, progesterone, and estradiol-glucoside could be determined in the process water samples. The amounts of individual steroids in influent and effluent waters were 0–429 and 0–207 ng/L, respectively. Correspondently, their total amounts were 735 and 212 ng/L with excellent in day and inter-day repeatability. The RSD values were less than 1, 9.7, and 19% in repeated analyses, calculated from 60 analyses during 24 h, and from 130 analyses during 15 months, respectively. The steroid removal in purification process was 65% on average. The solid particles separated in three steps during the water clean-up concept contained 9.8–45 ng/g steroids in combined dry precipitates.     

Evaluation of energy savings by using high efficiency motors in a thermal power station

This paper presents potential energy savings by installing high-efficiency motors instead of existing ones and their impact on greenhouse gases emissions reductions. This research study of the energy efficiency of electric motors has been performed in a typical thermal power plant. In the literature, the focus has been mainly on separate and away electric motors from operating facilities. The important advantage of this paper over other studies is that it uses the actual motors’ efficiency in the evaluation. The gains both in terms of electrical energy savings and in terms of financial economy by using high-efficiency motors have been discussed. As a result, the energy saving can be expected as 12.6% at the operating rate. This excellent result also reduces greenhouse gas emission by 1,423 tons every year. The analysis of the data provided an overview on energy losses often generated by the degradation and rewinding of electrical motors. This study represents very encouraging results that will help energy managers of industrial plants to become more involved in energy efficiency strategies.     

Economic feasibility of solar-powered reverse osmosis water desalination: a comparative systemic review

Environmental Science and Pollution Research - Due to disparities in the allocation of rainwater and drought, extreme exploitation of groundwater reservoirs has depleted water supplies in many...     

Distribution and Statistical Analysis of Leachable and Total Heavy Metals in the Sediments of the Suez Gulf

The concentrations of nine heavy metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pd and Zn) in the labile and total fractions of muddy and sandy sediment samples collected from twelve sites in Suez Gulf during April 1999 were studied to evaluate the pollution status of the Suez Gulf. The enrichment factors (EF) for each element were calculated. There are extremely high concentrations of Cd, Ni, Pb and slightly concentration of Cr and Cu in both muddy and sandy sediments. The concentration of Zn was moderately high and can be considered as seriously contaminate Metal pollution index (MPI) shows high values ranged between 46 to 156 and 40 to 232 for both sandy and muddy sediments, respectively. Concentrations of heavy metals were normalized against iron for total fraction in both of sandy and muddy sediments. Principal component analysis (PCA) was studied on the data matrix obtained and represented three-factor model explaining 92.22% for labile and 88.82% for total fractions of muddy sediment. The main source of contamination is the offshore oil fields and industrial wastes. This is largely a result of ineffective and inefficient operation equipment, illegal discharge of dirty ballast water from tankers and lack of supervision and prosecution of offenders.     

Biogenic sulphide plays a major role on the riboflavin-mediated decolourisation of azo dyes under sulphate-reducing conditions

The effect of high concentrations of sulphate on the reductive decolourisation of different azo dyes by anaerobic sludge was studied in batch cultures. Sludge cultures were pre-incubated under sulphate-reducing conditions prior addition of dyes. Little or no effects of sulphate (5-10 g sulphate l(-1)) on the rate of decolourisation of Reactive Orange 14 (RO14), Direct Blue 53 (DB53) and Direct Blue 71 (DB71) were observed when no external redox mediator was provided. However, an increase in sulphate concentration, in the presence of riboflavin (20 microM), enhanced the decolourisation of all dyes. The first-rate constant of decolourisation (k) was increased up to 2-, 3.6- and 2-fold for RO14, DB53 and DB71, respectively, by supplying high sulphate concentrations, compared to the controls lacking sulphate, in the presence of the redox mediator. Sulphate reduction did not take place during the course of azo reductions, but was only evident before dye addition and after complete decolourisation, suggesting azo dyes reduction out-competed sulphate reduction for the available reducing equivalents. The experimental data suggest that reduction of azo dyes by riboflavin, which had been reduced by biogenic sulphide, was the major mechanism implicated during decolourisations, which was corroborated by abiotic incubations. Riboflavin greatly accelerated the abiotic reduction of RO14, so that the k value was increased up to 44-fold compared to the control lacking riboflavin.     

Assessing the acoustical climate of underground stations.

Designing a proper acoustical environment--indispensable to speech recognition--in long enclosures is difficult. Although there is some literature on the acoustical conditions in underground stations, there is still little information about methods that make estimation of correct reverberation conditions possible. This paper discusses the assessment of the reverberation conditions of underground stations. A comparison of the measurements of reverberation time in Warsaw's underground stations with calculated data proves there are divergences between measured and calculated early decay time values, especially for long source-receiver distances. Rapid speech transmission index values for measured stations are also presented.     

Freight transport and non-driving work duties as predictors of falling asleep at the wheel in urban areas of Crete

BACKGROUND: This study investigated the impact of subjective reports of drowsy driving and non-driving duties on the falling asleep responses and road crash involvement of professional drivers in Crete. An attempt was also made to elucidate other driving parameters, such as freight transportation, which could be potential predictors of risky driving, after controlling for lifestyle patterns. METHOD: A sample of 317 professional drivers was studied through personal interviews. The interview questionnaire included items about sleep and fatigue as contributing factors to falling asleep probability and crash risk. In addition, the drivers reported the type of freight they carried in their last trip, as well as practices such as smoking and alcohol consumption. RESULTS: The first logistic regression analysis showed that the most significant predictors of falling asleep at the wheel were transportation of fruits/vegetables and livestock, non-driving hours of work, insufficient hours of sleep, and smoking. The second logistic regression analysis revealed all the previous items as powerful factors of crash probability, including the transportation of express freight and freezer. IMPACT: The findings of the current study are discussed as they pertain to directions for future studies and for the development of fatigue countermeasures.