Potentially toxic metal contamination of urban soils and roadside dust in Shanghai, China

A detailed investigation was conducted to understand the contamination characteristics of a selected set of potentially toxic metals in Shanghai. The amount of Pb, Zn, Cu, Cr, Cd and Ni were determined from 273 soil/dust samples collected within urban area. The results indicated that concentration of all metals except Ni in soils was significant, and metal pollution was even severer in roadside dust. A series of metal spatial distribution maps were created through geostatistical analysis, and the pollution hotspots tended to associate with city core area, major road junctions, and the regions close to industrial zones. In attempt of identifying the source of metals through geostatistical and multivariate statistical analyses, it was concluded as follows: Pb, Zn and Cu mainly originated from traffic contaminants; soil Ni was associated with natural concentration; Cd largely came from point-sourced industrial pollution; and Cr, Ni in dust were mainly related to atmospheric deposition.     

Simultaneous conversion of CHClF(2) and CH(3)Br to CH(2)CF(2)

Gas phase reaction of CHClF(2) with CH(3)Br in an alumina tube reactor at 773-1123 K as a function of various input ratios of CH(3)Br to CHClF(2) is presented. The major products detected include C(2)F(4), CH(2)CF(2), and CH(4). Minor products include CH(3)Cl, CHF(3), C(2)H(4), C(2)H(2), CH(2)CF-CF(3), and C(2)H(3)F. The reaction produces a high yield of CH(2)CF(2) (53% based on CHClF(2) feed) at 1123 K and an input molar ratio of CH(3)Br to CHClF(2) of 1.8, suggesting that the reaction potentially can be developed as a process to convert two ozone depleting substances (CHClF(2) and CH(3)Br) to a highly valuable chemical, CH(2)CF(2). The reaction of CHClF(2) with CH(3)Cl and CH(3)I was also investigated under similar reaction conditions, to assist in understanding the reaction chemistry involved in the reaction of CHClF(2) with CH(3)Br.     

预腐蚀条件下不同孔数冷挤压强化7075-T6铝合金板件疲劳寿命退化规律

目的 研究腐蚀环境下单孔和多孔冷挤压强化铝合金板件的疲劳寿命退化规律和损伤机理。方法 针对2种不同孔距的三孔冷挤压强化7075-T6铝合金板件,采用模拟热带海洋大气环境的实验室加速腐蚀谱,开展不同腐蚀时间下的预腐蚀疲劳试验。结果 获得了3倍孔距的三孔挤压强化铝板以及单孔挤压强化铝板的C(t)曲线、疲劳S-N曲线和损伤形貌特征,分析了腐蚀后挤压强化试件的腐蚀机理及挤压强化作用。同时,将不同孔数试件的试验结果进行比较,探明了孔数对挤压强化铝板腐蚀和疲劳性能的影响。结论 腐蚀后挤压强化铝合金板件的疲劳性能发生显著退化,腐蚀损伤主要为剥蚀,疲劳裂纹萌生位置由孔边转移至表面。挤压孔数量对挤压强化铝合金板件的疲劳和腐蚀疲劳性能的影响较小。     

阿什河流域地下水脆弱性分区

为识别阿什河流域地下水易污区,基于DRASTIC模型,结合研究区水文地质特点和地下水源地特质,舍弃土壤类型和水力传导系数指标,新增抽水井群影响范围评价指标,得到适用于阿什河流域的DRATIE脆弱性评价体系.借助OpenGeoSys(OGS)软件,模拟研究区抽水与不抽水时的地下水流场,圈划出抽水时流场的变化区域,划分抽水井群影响范围.运用DRATIE模型对研究区进行脆弱性评价,绘制研究区地下水脆弱性分区图,并根据用水趋势进行脆弱性情景分析.结果表明:研究区地下水脆弱性主要为较低、中、较高3个级别;河漫滩和阶地区域较易受到污染,抽水井群影响范围内脆弱性为中等,1号井群每口井抽水量不宜超过3.23×10-2 m3/s,2号井群每口井抽水量不宜超过4.00×10-2 m3/s;其余地区较不易受到污染.研究显示,应严格控制水源地抽水量,以防阿什河水体倒灌;合理分配1、2号井群抽水量,可减小水源地脆弱性范围和等级.      

蒽生物降解及其动力学分析

从长期被石油污染的土壤中分离了一株优势菌,经鉴定为铜绿假单胞菌,研究了该菌株对蒽的降解性能,结果发现该菌株对蒽有良好的降解效果。经过147h的降解,蒽的浓度从100mg/L降至27.5mg/L,降解了72.5mg/L,降解率达72.5%,显示了极强的降蒽能力。同时,进行了动力学分析,结果表明蒽的残留浓度Y(mg/L)与时间t(h)符合方程Y=90.4322e(-0.0098)x。     

过去百年吕梁山南端油松生长特征及其与气候变化的关系

理解树木生长对气候变化和人类活动干扰的响应有助于未来森林管理和双碳政策的落实。本文基于采自吕梁山南端的油松（Pinus tabuliformis Carr.）树轮样本建立了标准树轮宽度年表。通过Pearson相关分析发现树轮年表对研究区3—7月土壤湿度（r=0.60,P<0.01,n=37）、5—6月平均最低温度（r=-0.37,P<0.01,n=63）和5月降水量（r=0.31,P<0.05,n=64）响应敏感,说明水分条件（降水和土壤湿度）是影响研究区油松径向生长的主要限制因子,温度则是通过调控土壤湿度进而影响树木径向生长过程。近百年来（1926—2011年）,研究区油松发生了三次生长释放事件（1932年,1977—1980年,2001—2011年）和一次生长抑制事件（1991—1994年）。生长释放事件在次数、持续时间和发生强度上都高于生长抑制事件。适宜（不适宜）的水热组合能够促进生长释放（抑制）,人类活动干扰也能够诱发生长事件。空间相关分析揭示树轮年表与研究区及周边较大范围的气候环境变化密切相关。本研究对深入了解该地区油松树种生长特征及其对气候与人类活动干扰的...     

纳米金红石TiO2的转晶及声催化降解偶氮品红的研究

利用超声波结合过氧化氢(H2O2)使纳米金红石型TiO2转晶,制备出了大约含有30%锐钛相的转晶纳米TiO2.通过TiO2催化超声降解偶氮品红的研究证实了转晶纳米TiO2粉末具有明显的声催化活性.除此之外,还考察了各种因素对转晶纳米TiO2催化超声降解偶氮品红反应的影响.结果表明,在转晶纳米TiO2催化剂的作用下,偶氮品红的超声降解效果明显优于使用纳米金红石型和纳米锐钛型TiO2的情况.偶氮品红的声催化降解过程符合一级动力学反应.在超声波频率40 kHz、输出功率50 W、催化剂用量1000 mg·L-1、pH为5.00、温度为20℃、偶氮品红水溶液初始浓度20 mg·L-1的条件下,照射40 min时的降解率即可达到75%以上.     

应用地质累积指数评价攀枝花地区土壤重金属污染

应用地质累积指数对攀枝花地区昔格达组粘土中重金属污染进行了评价研究。结果表明，各重金属元素污染较严重的地区分布在宝顶煤矿、太平煤矿、攀钢冶钢厂、攀钢矿山、尾矿坝等工矿区，污染较轻微的地区分布在红格、新九等农业区。各元素的污染程度上看，该区As和Cu污染较重，Cd,Pb,Zn次之，而Cr污染最轻微。     

松花江流域面源污染特征与防治对策

在概述松花江流域水环境状况的基础上,分析了其面源污染的特征,农药流失、超量和不合理施用化肥、规模化养殖、生产、生活污水排放是流域面源污染的主要来源。结合面源污染特征等因素,有针对性地确定治理技术,如加强对面源污染防治工作重要性的认识、作好面源污染监测和防治技术示范推广工作、发展循环型农业等,提出了保护与治理可行的污染防治对策。     

Photocatalytic degradation of dye effluent by titanium dioxide pillar pellets in aqueous solution

Photocatalytic oxidation (PCO) process is an effective way to deal with organic pollutants in wastewater which could be difficult to be degraded by conventional biological treatment methods. Normally the TiO2 powder in nanometre size range was directly used as photocatalyst for dye degradation in wastewater. However the titanium dioxide powder was arduous to be recovered from the solution after treatment. In this application, a new form of TiO2(i. e. pillar pellets ranging from 2.5 to 5.3 mm long and with a diameter of 3.7 mm) was used and investigated for photocatalytic degradation of textile dye effluent. A test system was built with a flat plate reactor(FPR) and UV light source(blacklight and solar simulator as light source respectively) for investigating the effectiveness of the new form of TiO2. It was found that the photocatalytic process under this configuration could efficiently remove colours from textile dyeing effluent. Comparing with the TiO2 powder, the pellet was very easy to recovered from the treated solution and can be reused in multiple times without the significant change on the photocatalytic property. The results also showed that to achieve the same photocatalytic performance, the FPR area by pellets was about 91% smaller than required by TiO2 powder. At least TiO2 pellet could be used as an alternative form of photocatalyst in applications for textile effluent treatment process, also other wastewater treatment processes.