综合水质标识指数法在海拉尔河水质评价中的应用研究

水质评价是水环境治理的重要基础性工作.水质综合标识指数法涵盖了综合水质类别、定量污染程度、水环境功能区达标等信息,是将定性与定量评价相结合,能够对综合水质做出合理的解释,不会因个别指标导致过分评价.研究将海拉尔河划分为3个控制单元,根据2003年-2012年水质监测数据,采用综合水质标识指数法识别各控制单元主要污染因子,并分析海拉尔河水质时空变化规律.研究结果表明海拉尔河从上游至下游综合水质标识指数逐渐升高,上游水质较好,中游和下游主要污染指标为高锰酸盐指数和COD.2003年-2012年,海拉尔河高锰酸钾指数、BOD5、氨氮和总磷的污染减轻,化学需氧量污染略微减轻但仍存在超标风险.     

餐饮源油烟中PM2.5的化学组分特征

集中分析了餐饮无组织排放源(街边小吃、火锅店、露天烧烤)及有组织排放源(10家大中型餐馆)油烟PM_2.5中的TC(总碳)、元素组分、离子组分和16种PAHs,得到了各类餐饮源油烟PM_2.5的化学组成特征,建立了餐饮源油烟化学成分谱. 结果表明:各餐饮源油烟的ρ(PM_2.5)是大气背景值的3~42倍,其中露天烧烤油烟的ρ(PM_2.5)最高,达5 659.8 μg/m3. 不同餐饮源油烟的PM_2.5中各化学组分均为w(TC)(38.1%~75.8%)＞w(元素组分)(4.5%~27.0%)＞w(离子组分)(2.7%~22.6%),并且ρ(PM_2.5)与w(TC)呈显著正相关(R=0.84). 菲(PHE)、芘(PYR)、荧蒽(FLT)的质量分数在各类餐饮源油烟的PAHs中均普遍较高,分别为13.8%~21.6%、9.2%~26.5%、6.9%~22.0%.大中型餐馆油烟的PAHs中苯并苝(BPE)的质量分数最高(27.5%),而在其他餐饮源中均小于6.7%;(CHR)的质量分数最低(3.3%),而在其他餐饮源中均大于5.3%. 露天烧烤油烟的PAHs中芘、荧蒽的质量分数分别是其他餐饮源的2.7和2.3倍以上;萘(NAP)的质量分数(0.3%)较小,但在其他餐饮源中均大于11.4%,可以作为特定餐饮源油烟的特征物种.      

A probabilistic hazard and risk assessment of exposure to metals and organohalogens associated with a traditional diet in the Indigenous communities of Eeyou Istchee (northern Quebec,Canada)

Environmental Science and Pollution Research - Hunting, trapping, and fishing are part of an Indigenous lifestyle in subarctic Canada. However, this lifestyle may be a route of exposure to...     

Glutathione-functionalized melamine sponge,a mimic of a natural antidote,as a quick responsive adsorbent for efficient removal of Hg(II) from aqueous solutions

Minamata disease is caused by methylmercury, which is produced by microorganisms from inorganic mercury ions, Hg(II), in the aquatic environment. Adsorption is a feasible method to remove Hg(II) from waters, but there are some drawbacks when using conventional adsorbents, for example, tedious solid–liquid separation, slow response, and excessive residual levels of mercury. In this work, a novel spongy adsorbent has been developed for Hg(II) removal via surface functionalization of melamine formaldehyde sponge by glutathione. This material mimics a natural antidote that removes trace heavy metals in the human body. Results show that the functionalized sponge displays a 99.99% removal efficiency for low concentrations of Hg(II) of 10 mg/L. As a consequence, the residual Hg concentration is lower than 0.005 mg/L, which is slightly below the standard for total mercury in drinking water, of 0.006 mg/L, formulated by the World Health Organization, and much lower that the discharge regulation standard, of 0.01 mg/L, set by the ministry of environmental protection of China. Adsorption kinetic studies indicate that the functionalized sponge has a fast response. Indeed, the adsorption equilibrium can be reached within 10 min, and about 80% of total adsorption capacities are reached in 1 min. Moreover, the maximum adsorption capacity of the glutathione-functionalized sponge is as high as 240.02 mg/g, as shown by adsorption isotherm. Overall our findings disclose the great potential of the developed sponge adsorbent for rapid and efficient removal of Hg(II) from water.     

Roof-level large- and small-scale coherent structures in a street canyon flow

Environmental Fluid Mechanics - The characteristics of large- and small-scale turbulent motions at roof-level in a street canyon flow were experimentally investigated along with their...     

Morphological features of a case of retinoic acid embryopathy

A case of retinoic acid embryopathy which was retrospectively diagnosed after delivery is presented. The affected fetus was exposed to the drug during the first month of pregnancy and second-trimester sonographic examination showed hydrocephalus and cardiacmalformation. The diagnosis was made on the basis of autopsy findings and genetic enquiry.     

Annual migrations,diving behavior,and thermal biology of Atlantic bluefin tuna, <Emphasis Type="Italic">Thunnus thynnus</Emphasis>, on their Gulf of Mexico breeding grounds

Electronic tags were used to examine the biology of Atlantic bluefin tuna (Thunnus thynnus L.) on their breeding grounds in the Gulf of Mexico (GOM). The hypothesis that movement patterns, diving behavior, and thermal biology change during different stages of the breeding migration was tested. Mature Atlantic bluefin tuna tagged in the western Atlantic and the GOM, were on their breeding grounds from February to June for an average of 39 ± 11 days. The bluefin tuna experienced significantly warmer mean sea surface temperatures (SSTs) within the GOM (26.4 ± 1.6°C) than outside the GOM (20.2 ± 1.9°C). As the bluefin tuna entered and exited the GOM, the fish dove to daily maximum depths of 568 ± 50 and 580 ± 144 m, respectively, and exhibited directed movement paths to and from the localized breeding areas. During the putative breeding phase, the bluefin tuna had significantly shallower daily maximum depths (203 ± 76 m), and exhibited shallow oscillatory dives during the night. The movement paths of the bluefin tuna during the breeding phase were significantly more residential and sinuous. The heat transfer coefficients (K) were calculated for a bluefin tuna in the GOM using the recorded ambient and body temperatures. The K for this fish increased rapidly at the high ambient temperatures encountered in the GOM, and was significantly higher at night in the breeding phase when the fish was exhibiting shallow oscillatory dives. This suggests that the fish were behaviorally and physiologically thermoregulating in the Gulf of Mexico. This study demonstrates that the movement patterns, diving behavior, and thermal biology of Atlantic bluefin tuna change significantly at different stages of the breeding migration and can be used to define spawning location and timing. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

What is Good Ecological Restoration?

The rapid rise of ecological restoration is forcing consideration of what good restoration entails. Defining an end point for restoration is as much an ethical matter as a technical one, but scientifically trained restorationists have largely ignored the former issue. I argue that good restoration requires an expanded view that includes historical, social, cultural, political, aesthetic, and moral aspects. This expanded definition is necessary at a practical level to guide practitioners in the pursuit of excellence and at a conceptual level to prevent restoration from being swamped by technological activities and projects that veer away from ecological fidelity. Ecological fidelity is based on three principles: structural/compositional replication, functional success, and durability. These principles produce effective restoration, which is a necessary but not a sufficient condition of good restoration. An examination of characteristic problems that emanate from technological practices—reverse adaptation, an attention to product at the expense of process, and the separation of actions from consequences—leads directly to an expanded, inclusive framework for restoration. The results of an inclusive restoration process set up conditions necessary for restoration to achieve both ecological fidelity and harmonious human relationships within ecosystems.     

Investigation of contact vacuuming for remediation of fungally contaminated duct materials

Environmental fungi become a potential Indoor Air Quality (IAQ) problem when adequate moisture and nutrients are present in building materials. Because of their potential to rapidly spread contamination throughout a building, ventilation system materials are of particular significance as potential microbial contamination sources. Current recommendations are to discard fibrous glass insulation that appears to be wet or moldy. Unfortunately, this advice is not always followed. Instead, cleaning is sometimes being used in buildings to remediate fibrous glass duct liner that is already contaminated with microbial growth. The objectives of this research program were to: 1) determine, under dynamic test conditions, whether fungal spore levels on heating, ventilating, and air-conditioning (HVAC) duct material surfaces could be substantially reduced by thorough vacuum cleaning, 2) evaluate whether subsequent fungal growth could be limited or contained by mechanical cleaning, and 3) provide data concerning the advisability of cleaning duct materials. The constant high relative humidity (RH) environment to which the test materials were exposed during this study was selected as a favorable growth environment that is frequently found in Southeastern United States HVAC systems. The results showed that, following cleaning, the levels of the two test fungi, A. versicolor and P. chrysogenum, recovered to preclean levels within 6 weeks. Therefore, mechanical cleaning by contact vacuuming alone was able to only temporarily reduce the surface fungal load. The current guidelines to discard contaminated materials should be followed.     

Termite assemblages in a West-African semi-deciduous forest and teak plantations

Responses of termite assemblages to the conversion of semi-deciduous forest into teak plantations were studied in the Lama Forest Reserve in Benin, West Africa. Four belt transect surveys were run in each of the two forest types, adopting a modified termite diversity assessment protocol. Termite assemblages were remarkably species-poor in both forest types, with only 19 species encountered altogether. The low species richness was due to the rarity of soil-feeders of the soil/humus interface and the absence of true soil-feeders in the compact vertisol soil. Species richness was significantly higher in semi-deciduous forest than in teak plantations, but termite encounters were significantly lower. Termite assemblage and feeding group structure differed significantly among forest types. Wood-feeders were recorded only in semi-deciduous forest. In contrast, fungus-growers were more species-rich and about four times more abundant in teak plantations, mainly due to one Ancistrotermes species. The humification score, which depicts the position of termite assemblages along a gradient of increasing humification of their food substrate, was significantly higher in teak plantations, due to the absence of wood-feeders and the preponderance of fungus-growers. Combined principal components and multiple regression analysis identified two significant predictors of termite assemblages, soil water content and leaf litter biomass. The abundance of fungus-growers in teak plantations seemed to be mainly related to the high leaf litter biomass. Indirect evidence also suggests that lower predation pressure by ants on termites in teak plantations may have contributed to the abundance of termites.