Investigation of insecticide leaching from potted nursery stock and aquatic health benefits of bioretention cells receiving nursery runoff

Tree nurseries and greenhouses within the USDA red imported fire ant (RIFA) quarantine zone are required to incorporate insecticides into their potting media to prevent artificial spread of RIFA. Bifenthrin and fipronil are two common insecticides that are incorporated into potting media. During irrigation and stormwater events, there is potential for insecticides to leach from nursery pots, resulting in the contamination of nearby surface waters. In this study, occurrences of insecticides in simulated nursery runoff were compared with two irrigation strategies and two types of containers in single pot leaching and field runoff simulations. In addition, toxicity of pot leachate to the aquatic invertebrate, Hyallela azteca, was measured, and removal efficiencies of insecticides from bioretention cell media were evaluated. Overhead irrigation resulted in significantly higher concentrations than drip irrigation, and RootMaker® pots allowed more leaching as compared to standard slick-wall pots. However, in all tests, the average concentration of bifenthrin during 15 days of leaching in both pot and field simulations was greater than 200 ng/L; more than 100-fold greater than the LC₅₀ for H. azteca. Toxicity studies confirmed this level of toxicity. Higher amounts of compost, 20 and 40 %, in bioretention cell media resulted in greater percent reduction of both bifenthrin and fipronil. This study determined that management techniques may be able to limit the amount of insecticide that leaches from pots and runs off to receiving water bodies. Specifically, the selection of appropriate pot types, irrigation strategies, or filtering runoff through bioretention cells may reduce contamination loads. Thus, further best management strategies such as the use of bioretention cells are needed in nursery and greenhouse facilities to prevent surface water runoff from transporting toxic insecticides.     

Comparative study of non-invasive methods for assessing Daphnia magna embryo toxicity

Embryos, unlike adults, are typically sessile, which allows for an increase in the available metrics that can be used to assess chemical toxicity. We investigate Daphnia magna development rate and oxygen consumption as toxicity metrics and compare them to arrested embryo development using four different techniques with potassium cyanide (KCN) as a common toxicant. The EC₅₀ (95 % CI) for arrested development was 2,535 (1,747–3,677) μg/L KCN. Using pixel intensity changes, recorded with difference imaging, we semi-quantitatively assessed a decrease in development rate at 200 μg/L KCN, threefold lower than the arrested development lowest observed effect concentration (LOEC). Respirometry and self-referencing (SR) microsensors were two unique techniques used to assess oxygen consumption. Using respirometry, an increase in oxygen consumption was found in the 5 μg/L KCN treatment and a decrease for 148 μg/L, but no change was found for the 78 μg/L KCN treatment. Whereas, with SR microsensors, we were able to detect significant changes in oxygen consumption for all three treatments: 5, 78, and 148 μg/L KCN. While SR offered the highest sensitivity, the respirometry platform developed for this study was much easier to use to measure the same endpoint. Oxygen consumption may be subject to change during the development process, meaning consumption assessment techniques may only be useful only for short-term experiments. Development rate was a more sensitive endpoint though was only reliable four of the six embryonic developmental stages examined. Despite being the least sensitive endpoint, arrested embryo development was the only technique capable of assessing the embryos throughout all developmental stages. In conclusion, each metric has advantages and limitations, but because all are non-invasive, it is possible to use any combination of the three.     

Metal binding properties of extracellular polymeric substances extracted from anaerobic granular sludges

Extracellular polymeric substances (EPS) were extracted from four anaerobic granular sludges with different procedures to study their involvement in biosorption of metallic elements. EPS extracts are composed of closely associated organic and mineral fractions. The EPS macromolecules (proteins, polysaccharides, humic-like substances, nucleic, and uronic acids) have functional groups potentially available for the binding of metallic elements. The acidic constants of these ionizable groups are: pK _a1 (4–5) corresponding to the carboxyl groups; pK _a2 (6–7) corresponding to the phosphoric groups; pK _a3 (8–10) and pK _a4 (≈10) corresponding to the phenolic, hydroxyl, and amino groups. The polarographic study confirms the higher affinity of the EPS to bind to lead than to cadmium. Moreover, the binding of these metallic compounds with the EPS is a mix of several sorption mechanisms including surface complexation, ion exchange, and flocculation. Inorganic elements were found as ions linked to organic molecules or as solid particles. The mineral fraction affects the binding properties of the EPS, as the presence of salts decreases the EPS binding ability. Calcite and apatite particles observed on SEM images of EPS extracts can also sorb metallic elements through ion exchange or surface complexation.     

Optimizing line intercept sampling and estimation for feral swine damage levels in ecologically sensitive wetland plant communities

Ecological sampling can be labor intensive, and logistically impractical in certain environments. We optimize line intercept sampling and compare estimation methods for assessing feral swine damage within fragile wetland ecosystems in Florida. Sensitive wetland sites, and the swine damage within them, were mapped using GPS technology. Evenly spaced parallel transect lines were simulated across a digital map of each site. The length of each transect and total swine damage under each transect were measured and percent swine damage within each site was estimated by two methods. The total length method (TLM) combined all transects as a single long transect, dividing the sum of all damage lengths across all transects by the combined length of all transect lines. The equal weight method (EWM) calculated the damage proportion for each transect line and averaged these proportions across all transects. Estimation was evaluated using transect spacings of 1, 3, 5, 10, 15, and 20 m. Based on relative root mean squared error and relative bias measures, the TLM produced higher quality estimates than EWM at all transect spacings. Estimation quality decreased as transect spacing increased, especially for TLM. Estimation quality also increased as the true proportion of swine damage increased. Diminishing improvements in estimation quality as transect spacings decreased suggested 5 m as an optimal tradeoff between estimation quality and labor. An inter-transect spacing of 5 m with TLM estimation appeared an optimal starting point when designing a plan for estimating swine damage, with practical, logistical, economic considerations determining final design details.     

Rape (Brassica chinensis L.) seed germination, seedling growth, and physiology in soil polluted with di-n-butyl phthalate and bis(2-ethylhexyl) phthalate

Phthalic acid esters (PAEs) pollution in agricultural soils caused by widely employed plastic products is becoming more and more widespread in China. PAEs polluted soil can lead to phytotoxicity in higher plants and potential health risks to human being. We evaluated the individual toxicity of di-n-butyl phthalate (DnBP) and bis(2-ethylhexyl) phthalate (DEHP), two representative PAEs, to sown rape (Brassica chinensis L.) seeds within 72 h (as germination stage) and seedlings after germination for 14 days by monitoring responses and trends of different biological parameters. No significant effects of six concentrations of PAE ranging from 0 (not treated/NT) to 500 mg?kg^?1 on germination rate in soil were observed. However, root length, shoot length, and biomass (fresh weight) were inhibited by both pollutants (except root length and biomass under DEHP). Stimulatory effects of both target pollutants on malondialdehyde (MDA) content, superoxide dismutase (SODase) activity, ascorbate peroxidase (APXase) content, and polyphenoloxidase (PPOase) activity in shoots and roots (SODase activity in shoots excluded) were in the same trend with the promotion of proline (Pro) but differed with acetylcholinesterase activity (except in shoots under DnBP) for analyzed samples treated for 72 h and 14 days. Responses of representative storage compounds free amino acids (FAA) and total soluble sugar (TSS) under both PAEs were raised. Sensitivity of APXase and Pro in roots demonstrates their possibility in estimation of PAE phytotoxicity and the higher toxicity of DnBP, which has also been approved by the morphological photos of seedlings at day 14. Higher sensitivity of the roots was also observed. The recommended soil allowable concentration is 5 mg DnBP?kg^?1 soil for the development of rape. We still need to know the phytotoxicity of DEHP at whole seedling stage for both the growing and development; on the other hand, soil criteria for PAE compounds are urgently required in China.     

Pollution Control by Locational Change and Technological Abatement

In recent years, there has been a downward trend in sulfur dioxide concentrations in downtown St. Louis. This paper examines the contribution to this trend from locational changes of polluting sources and from technological abatement. A simple diffusion model is used to relate annual average concentrations to annual emission data. The results suggest that, had there been no abatement activity, the changes in location of sources that occurred between 1963 and 1970 have more or less offset a 40% increase in annual emissions over that period. However, the abatement activity, essentially the consequence of air pollution regulations, may possibly be credited with a decline of 35% in the annual average concentration.     

Light-Duty Motor Vehicle Exhaust Particulate Matter Measurement in the Denver,Colorado, Area

ABSTRACT

A study of particulate matter (PM) emissions from in-use, light-duty vehicles was conducted during the summer of 1996 and the winter of 1997 in the Denver, CO, region. Vehicles were tested as received on chassis dynamometers on the Federal Test Procedure Urban Dynamometer Driving Schedule (UDDS) and the IM240 driving schedule. Both PM10 and regulated emissions were measured for each phase of the UDDS. For the summer portion of the study, 92 gasoline vehicles, 10 diesel vehicles, and 9 gasoline vehicles with visible smoke emissions were tested once. For the winter, 56 gasoline vehicles, 12 diesel vehicles, and 15 gasoline vehicles with visible smoke were tested twice, once indoors at 60 °F and once outdoors at the prevailing temperature. Vehicle model year ranged from 1966 to 1996. Impactor particle size distributions were obtained on a subset of vehicles. Continuous estimates of the particle number emissions were obtained with an electrical aerosol analyzer. This data set is being provided to the Northern Front Range Air Quality Study program and to the State of Colorado and the U.S. Environmental Protection Agency for use in updating emissions inventories.     

Air Quality Measurements for the Aerosol Research and Inhalation Epidemiology Study

Abstract

Measurements of pollutant gases, airborne particulate matter mass and composition, and meteorology have been made at a core site near downtown Atlanta, GA, since August 1998 in support of the Aerosol Research and Inhalation Epidemiology Study (ARIES). This site is one of eight in the Southeastern Aerosol Research and Characterization network. The measurement objective is to provide a long-term, multivariate dataset suitable for investigating statistical associations of respiratory and cardiovascular disease with airborne particulate matter composition, meteorology, and copollutant gases through epidemiologic modeling. Measurements are expected to continue through 2010. Ancillary multiyear measurements at additional sites in the Atlanta metropolitan area and in short-term exposure assessments have been used to estimate the exposure/measurement error associated with using data from a central site to approximate human exposures for the entire area. To date, 13-, 25-, and 53-month air quality datasets have been used in epidemiologic analyses.     

Characterization of Solid-Phase Microextraction and Gas Chromatography for the Analysis of Gasoline Tracers in Different Microenvironments

Abstract

Gasoline tracers were collected on solid-phase microextraction (SPME) fibers and analyzed by capillary gas chromatography with photoionization detector (GC/PID). This was part of a larger study to quantify personal exposure to motor vehicle gasoline evaporative and combustive emissions in high-end exposure microenvironments (MEs). The SPME fiber selected for this application was a 75-µm carboxen/polydimethylsiloxane. Sequential 10-min samples were collected for measurement of benzene, toluene, ethylbenzene, and ortho-, meta-, and para-xylene in different MEs in Atlanta, GA, in summer 2002 and Reno, NV, in spring 2003. Field calibrations were performed with certified gas standards in 1-L Tedlar bags for varying concentrations and exposure times. SPME detection limits were ～0.2 ppbv with a precision of 3–17% and accuracy of 30%. A dynamic system was designed for temperature and relative humidity calibrations, with corrections for the effects of these variables performed when necessary. SPME data compared satisfactorily with integrated canister samples, continuous PID, and field portable mass spectrometer data.     

The Southeastern Aerosol Research and Characterization Study,Part 3: Continuous Measurements of Fine Particulate Matter Mass and Composition

Abstract

Deployment of continuous analyzers in the Southeastern Aerosol Research and Characterization Study (SEARCH) network began in 1998 and continues today as new technologies are developed. Measurement of fine particulate matter (PM_2.5) mass is performed using a dried, 30 °C tapered element oscillating microbalance (TEOM). TEOM measurements are complemented by observations of light scattering by nephelometry. Measurements of major constituents include: (1) SO₄ ^2? via reduction to SO₂; (2) NH₄ ⁺ and NO₃ ^? via respective catalytic oxidation and reduction to NO, (3) black carbon (BC) by optical absorption, (4) total carbon by combustion to CO₂, and (5) organic carbon by difference between the latter two measurements. Several illustrative examples of continuous data from the SEARCH network are presented. A distinctive composite annual average diurnal pattern is observed for PM_2.5 mass, nitrate, and BC, likely indicating the influence of traffic-related emissions, growth, and break up of the boundary layer and formation of ammonium nitrate. Examination of PM_2.5 components indicates the need to better understand the continuous composition of the unmeasured “other” category, because it contributes a significant fraction to total mass during periods of high PM_2.5 loading. Selected episodes are presented to illustrate applications of SEARCH data. An SO₂ conversion rate of 0.2%/hr is derived from an observation of a plume from a coal-fired power plant during early spring, and the importance of local, rural sources of NH₃ to the formation of ammonium nitrate in particulate matter (PM) is demonstrated.