Remediation of PCB‐Contaminated Soil Using Extraction and Destruction: Bench‐Scale Test

Polychlorinated biphenyls (PCBs) are a persistent environmental issue worldwide. This study summarizes the results obtained from a bench‐scale test of remediating PCB‐impacted soil. The research aimed to evaluate the effectiveness of extracting the PCB Aroclor 1260 from soil, transferring it to a liquid matrix, and then treating the PCB‐containing liquid using an Activated Metal Treatment System, a technology developed by NASA based on zero valent magnesium (ZVMg). The soil was from a former electrical plant area impacted by PCBs. The initial concentration of untreated soil contained an average of 4.7 ± 0.15 mg/kg of Aroclor 1260. The results showed that the mass transfer phenomena is possible using ethanol as a liquid matrix, reaching transfer results up to 93 percent. The ZVMg enabled the destruction of the Aroclor 1260, which reached 20 percent without any buildup of undesirable by‐products, such as less chlorinated PCBs.  ©2016 Wiley Periodicals, Inc.     

Physiologically based pharmacokinetic modeling of perfluoroalkyl substances in the human body

Currently, there are limited data on the levels of perfluoroalkyl substances other than perfluorooctane sulfonic acid and perfluorooctanoic acid in the human body. Most of this information has been extracted from biological monitoring of plasma while the occurrence of perfluoroalkyl substances in other human tissues is rarely studied. The objective of the present study was to develop a physiologically based pharmacokinetic model to assess the concentration of perfluoroalkyl substances in human tissues, based on an existing model previously validated for perfluorooctane sulfonic acid and perfluorooctanoic acid. Experimental data on concentrations of perfluoroalkyl substances in human tissues from individuals in Tarragona County (Catalonia, Spain) were used to estimate the values of some distribution and elimination parameters needed for the simulation. No significant correlations were found between these parameters and the chain lengths. The model was finally validated for five perfluoroalkyl substances.     

Trace elements in particulate matter of ambient air at petroleum filling stations

Size segregated suspended particulate matter (PM_2.5 and PM_10-2.5) in air at four major petroleum-filling stations in Ile-Ife, Nigeria, were monitored using double staged “Gent” stacked samplers to assess variations in mass loads and elemental concentrations of 25 elements. Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr, Zr, Cs, Ta, W, and Pb were determined in both fractions by external ion beam proton-induced X-ray emission technique. Enrichment factors and pollution indices were calculated and results revealed that most elements were anthropogenic in both fractions with concentrations exceeding the World Health Organization guideline standards.     

Disinfection byproducts in drinking water and regulatory compliance: A critical review

Disinfection by-products (DBPs) are regulated in drinking water in a number of countries. This critical review focuses on the issues associated with DBP regulatory compliance, including methods for DBP analysis, occurrence levels, the regulation comparison among various countries, DBP compliance strategies, and emerging DBPs. The regulation comparison between China and the United States (US) indicated that the DBP regulations in China are more stringent based on the number of regulated compounds and maximum levels. The comparison assessment using the Information Collection Rule (ICR) database indicated that the compliance rate of 500 large US water plants under the China regulations is much lower than that under the US regulations (e.g. 62.2% versus 89.6% for total trihalomethanes). Precursor removal and alternative disinfectants are common practices for DBP regulatory compliance. DBP removal after formation, including air stripping for trihalomethane removal and biodegradation for haloacetic acid removal, have gained more acceptance in DBP control. Formation of emerging DBPs, including iodinated DBPs and nitrogenous DBPs, is one of unintended consequences of precursor removal and alternative disinfection. At much lower levels than carbonaceous DBPs, however, emerging DBPs have posed higher health risks.