Characterization and pyrolysis of Chlorella vulgaris and Arthrospira platensis: potential of bio-oil and chemical production by Py-GC/MS analysis

Environmental Science and Pollution Research - Biofuels have been seen as potential sources to meet future energy demand as a renewable and sustainable energy source. Despite the fact that the...     

Furniture wood wastes: Experimental property characterisation and burning tests

Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected “raw” and primarily “engineered” (“composite”) wood wastes.The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in “engineered” wood wastes as compared with “raw” wood wastes; and relatively high energy content values of “engineered” wood wastes (ranging on the whole from 3675 to 5105 kcal kg⁻¹ for HHV, and from 3304 to 4634 kcal kg⁻¹ for LHV).The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in “engineered” wood burning tests of pyrroles and amines, as well as the additional presence (as compared with “raw” wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon.Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in “engineered” wood burning tests as compared with “raw” wood burning test; and considerable generation of the respirable PM₁ fraction during incomplete industrial wood burning.     

Application of membrane bioreactor technology for wastewater treatment and reuse in the Mediterranean region: Focusing on removal efficiency of non-conventional pollutants

The Mediterranean Region is a semi-arid area whose land is facing serious erosion, causing adverse impacts on agriculture. To improve the water availability, researchers have proposed the reclamation and reuse of treated wastewater. In this paper, we report the main findings of 10 years of research on the efficiencies of a conventional activated sludge process and a submerged membrane bioreactor, with particular emphasis on the removal of non-conventional pollutants. The studies showed that the membrane bioreactor produced a virtually solids-free, high-quality permeate: most nutrients, heavy metals, and persistent organic pollutants were removed, and in particular, dioxins, furans, and polychlorinated biphenyls were typically present at concentrations below the detection limit. Moreover, the total coliforms count decreased by 4–5 log and Escherichia coli was absent from the membrane bioreactor permeate. These results, combined with the continuing reduction of the capital and operating costs for this approach, suggest that membrane bioreactors are an increasingly cost-effective technology to produce treated effluents that are suitable for reuse.     

Comparison of environmental impacts related to municipal solid waste and construction and demolition waste management and recycling in a Latin American developing city

Environmental Science and Pollution Research - Construction and demolition waste (CDW) and municipal solid waste (MSW) are the waste flows mostly generated at a global level. In developing...     

Renewable energies in electricity generation for reduction of greenhouse gases in Mexico 2025

This study presents 4 scenarios relating to the environmental futures of electricity generation in Mexico up to the year 2025. The first scenario emphasizes the use of oil products, particularly fuel oil, and represents the historic path of Mexico's energy policy. The second scenario prioritizes the use of natural gas, reflecting the energy consumption pattern that arose in the mid-1990s as a result of reforms in the energy sector. In the third scenario, the high participation of renewable sources of energy is considered feasible from a technical and economic point of view. The fourth scenario takes into account the present- and medium-term use of natural-gas technologies that the energy reform has produced, but after 2007 a high and feasible participation of renewable sources of energy is considered. The 4 scenarios are evaluated up to the year 2025 in terms of greenhouse gases (GHG) and acid rain precursor gases (ARPG).     

A new photoproduct of the drug furosemide in aqueous media

The solar phototransformation of furosemide has been investigated in aqueous media. Irradiation of the drug in distilled water, in water and humic acids or nitrate ions, and in sewage sludge water affords a new dehalogenated dimer. The formation of the dimer has been explained by the formation of a cation radical intermediate. The low-measured environmental concentration of furosemide with respect to predicted environmental concentration in the Po and Lambro Rivers could be justified by its phototransformation.     

A “measurable” definition of sustainable development based on closed cycles of resources and its application to energy systems

Human society consumes resources that it is not able to reproduce. Human activities are still based on “open cycles,” starting from a condition of natural environmental balance and reaching an environmental imbalance. The challenging scope of scientific and technological research towards sustainability appears clear if it is based on this analysis: to find development systems based on “closed cycles” of resources. The challenging objective of realizing closed cycles leads to a definition of sustainability that indicates the path to sustainable development, as well as stating the general principle. It also provides a key to the qualitative measurement of sustainability. This means that the sustainability level of a system can be measured by measuring its capacity to avoid the consumption of resources. Zero consumption is a necessary condition for sustainability, and brings about as a side effect the highly desired “zero-waste” result. Materials entering the proposed endless scheme pass through the process of usefulness without losing their capacity to feed the system again after being used. Thus, the concept of “consumption” itself is replaced by one of “use” when resources are inserted into closed loops capable of feeding human development. The application of the closed cycle sustainability criterion particularly displays its feasibility, and a theoretical guiding role, in the energy sector. Energy vectors such as hydrogen and electricity enable the closure of the energy resources loop by effectively approaching the objective of “zero consumption” (and the side result of “zero waste”) through already demonstrated technological solutions.     

Winter survival of microbial contaminants in soil:An in situ verification

The aim of the research was to evaluate, at site scale, the influence of freezing and freeze/thaw cycles on the survival of faecal coliforms and faecal enterococci in soil, in a climate change perspective. Before the winter period and during grazing, viable cells of faecal coliforms and faecal enterococci were detected only in the first 10 cm below ground, while,after the winter period and before the new seasonal grazing, a lower number of viable cells of both faecal indicators was detected only in some of the investigated soil profiles, and within the first 5 cm. Taking into consideration the results of specific investigations, we hypothesise that the non-uniform spatial distribution of grass roots within the studied soil can play an important role in influencing this phenomenon, while several abiotic factors do not play any significant role. Taking into account the local trend in the increase of air temperature, a different distribution of microbial pollution over time is expected in spring waters, in future climate scenarios. The progressive increase in air temperature will cause a progressive decrease in freeze/thaw cycles at higher altitudes, minimising cold shocks on microbial cells, and causing spring water pollution also during winter.