Vehicular particulate matter emissions in road tunnels in Sao Paulo, Brazil

In the metropolitan area of S?o Paulo, Brazil, ozone and particulate matter (PM) are the air pollutants that pose the greatest threat to air quality, since the PM and the ozone precursors (nitrogen oxides and volatile organic compounds) are the main source of air pollution from vehicular emissions. Vehicular emissions can be measured inside road tunnels, and those measurements can provide information about emission factors of in-use vehicles. Emission factors are used to estimate vehicular emissions and are described as the amount of species emitted per vehicle distance driven or per volume of fuel consumed. This study presents emission factor data for fine particles, coarse particles, inhalable particulate matter and black carbon, as well as size distribution data for inhalable particulate matter, as measured in March and May of 2004, respectively, in the Janio Quadros and Maria Maluf road tunnels, both located in S?o Paulo. The Janio Quadros tunnel carries mainly light-duty vehicles, whereas the Maria Maluf tunnel carries light-duty and heavy-duty vehicles. In the Janio Quadros tunnel, the estimated light-duty vehicle emission factors for the trace elements copper and bromine were 261 and 220 microg km(-1), respectively, and 16, 197, 127 and 92 mg km(-1), respectively, for black carbon, inhalable particulate matter, coarse particles and fine particles. The mean contribution of heavy-duty vehicles to the emissions of black carbon, inhalable particulate matter, coarse particles and fine particles was, respectively 29, 4, 6 and 6 times higher than that of light-duty vehicles. The inhalable particulate matter emission factor for heavy-duty vehicles was 1.2 times higher than that found during dynamometer testing. In general, the particle emissions in S?o Paulo tunnels are higher than those found in other cities of the world.     

Ketoprofen Loaded in Natural Rubber Latex Transdermal Patch for Tendinitis Treatment

Ketoprofen is an analgesic with potent anti-inflammatory activity against acute inflammation, subacute inflammation, for the acute and long-term treatment of various inflammatory pathologies, as rheumatoid arthritis and colonic adenocarcinoma. In order to minimize the incidence of systemic events related to ketoprofen, the transdermal drug delivery system development has been most important. The advantages of using natural rubber latex membranes include not only the reduction of adverse systemic events, but also the suitability of the low cost of the material together with its physicochemical properties such as flexibility, mechanical stability, surface porosity and water vapor permeability, and besides being a biocompatible material also presents biological activity to stimulate the angiogenesis, being able to be used in tissue repair. This study demonstrated that ketoprofen was successfully incorporated into natural latex membranes for drug delivery. FTIR indicated that the drug did not interact chemically with the membrane. Moreover, the natural latex membranes released 60% of the ketoprofen incorporated in 50 h. SEM images indicated that a portion of the drug was present on the membrane surface, being this portion responsible for the burst release. The tensile tests showed that the addition of the drug into the natural latex membrane did not influence on the polymer mechanical behavior. In addition, drug-natural latex membranes presented no red blood cell damaging effects. Our data shows that the ketoprofen loaded natural latex membranes is a promising system for sustained drug delivery which can be used to minimize the adverse side effects of high dose systemic drug delivery.     

Habitat differences affect the nuclear morphology of the erythrocytes and the hepatic melanin in Leptodactylus fuscus (Anura) in the Brazilian Cerrado savanna

Environmental Science and Pollution Research - The sensitivity of anuran to the effects of habitat destruction and contamination has led to a preoccupying global decline in their populations....     

SARS-CoV-2: a systematic review of indoor air sampling for virus detection

Environmental Science and Pollution Research - In a post-pandemic scenario, indoor air monitoring may be required seeking to safeguard public health, and therefore well-defined methods, protocols,...     

Intake of uranium and radium-226 due to food crops consumption in the phosphate region of Pernambuco--Brazil

The phosphate region located in the Northeast of Brazil covers an area of approximately 150 km long with an average width of 4 km, along the coast of the states of Pernambuco and Paraíba. The inhabitants of this area are exposed to natural radioactivity levels higher than the background values recorded in the literature, mainly due to the presence of uranium and its decay products in the phosphatic sediments. The main aim of this study was to determine the activity concentration of uranium and (226)Ra in foodstuffs cultivated in this area, where the phosphate mineral has been extracted. The activity concentrations found for uranium and (226)Ra in the foodstuffs analyzed varied from 13 to 186 mBq kg(-1) (wet weight), with a mean value of 46 mBq kg(-1) and from 43 to 2209 mBq kg(-1) (wet weight), with a mean value of 358 mBq kg(-1), respectively. The annual intake of these radionuclides, for rural residents, was 7.45 Bq for uranium and 69.3 Bq for (226)Ra.     

Cleaner red mud residue production at an alumina plant by applying experimental design techniques in the filtration stage

Red mud is a residue obtained by the Bayer process during alumina production, and its disposal is an environmental problem due to its caustic nature, metal and radionuclide content and alkalinity. The present study analyzed five different filtration factors with two levels each in order to improve filtration and, thus, reduce the caustic content of this residue. This study was conducted at the Alumina do Norte do Brasil S.A (ALUNORTE) alumina plant, located in Pará, Brazil, in one of the six filters at the plant. Results show that the condensate is the primary factor in caustic red mud concentrations, followed by dilution, rotation and level of the basin filter. The interactions between dilution and the level of the basin filter were considered significant, as was the interaction amongst the three effects: dilution, level of the basin filter and vacuum. The model adjustment regarding the filtration process allows for the production of a final red mud product with lower caustic concentrations, resulting in economic advantages due to higher caustic recovery in filtration and lower caustic concentration in the red mud residue, which leads to an environmentally safer residue.     

Assessment of solar driven TiO2-assisted photocatalysis efficiency on amoxicillin degradation

The objective of this work was to evaluate the efficiency of a solar TiO₂-assisted photocatalytic process on amoxicillin (AMX) degradation, an antibiotic widely used in human and veterinary medicine. Firstly, solar photolysis of AMX was compared with solar photocatalysis in a compound parabolic collectors pilot scale photoreactor to assess the amount of accumulated UV energy in the system (Q _UV) necessary to remove 20 mg L^?1 AMX from aqueous solution and mineralize the intermediary by-products. Another experiment was also carried out to accurately follow the antibacterial activity against Escherichia coli DSM 1103 and Staphylococcus aureus DSM 1104 and mineralization of AMX by tracing the contents of dissolved organic carbon (DOC), low molecular weight carboxylate anions, and inorganic anions. Finally, the influence of individual inorganic ions on AMX photocatalytic degradation efficiency and the involvement of some reactive oxygen species were also assessed. Photolysis was shown to be completely ineffective, while only 3.1 kJ_UV?L^?1 was sufficient to fully degrade 20 mg L^?1 AMX and remove 61 % of initial DOC content in the presence of the photocatalyst and sunlight. In the experiment with an initial AMX concentration of 40 mg L^?1, antibacterial activity of the solution was considerably reduced after elimination of AMX to levels below the respective detection limit. After 11.7 kJ_UV?L^?1, DOC decreased by 71 %; 30 % of the AMX nitrogen was converted into ammonium and all sulfur compounds were converted into sulfate. A large percentage of the remaining DOC was in the form of low molecular weight carboxylic acids. Presence of phosphate ions promoted the removal of AMX from solution, while no sizeable effects on the kinetics were found for other inorganic ions. Although the AMX degradation was mainly attributed to hydroxyl radicals, singlet oxygen also plays an important role in AMX self-photosensitization under UV/visible solar light.     

Sugarcane straw management and soil attributes on alachlor and diuron sorption in highly weathered tropical soils

This research evaluated the effects of the new sugarcane harvesting system (without straw burning) and soil attributes on the organic carbon (OC) accumulation and sorption of alachlor (2-chloro-N-(2,6-diethylphenyl)-N-(methoxymethyl)acetamide) and diuron (3-(3,4-dichlorophenyl)-1,1-dimethylurea) in highly weathered Brazilian soils. Alachlor was more likely to leach (K _d,app = 1.0–7.0 L kg^?1 and mean K _oc,app = 174 L kg^?1) than diuron (K _d,app = 6.2–116.3 L kg^?1 and mean K _oc,app = 1789 L kg^?1). The sorption coefficient (K _d,app) values correlated better with soil OC contents, but the Fe-oxides also played an important role in these highly weathered soils. Sorption was enhanced in the areas without straw burning mostly due to OC accumulation that was higher in the clayey soils, but it was not enough to change their mobility classification.