Metals contamination in the foraging area of Milky Stork: evidence of anthropogenic inputs in the aquatic environment of Kuala Gula,Malaysia

The rapid decline of the wild Milky Stork population in Malaysia has led to the reintroduction of the captive bred species in Kuala Gula, Perak. The area is known as an important migratory stopover and sanctuary for both visitors and resident birds. Although Kuala Gula and its adjacent areas are regarded as pristine and unpolluted, recent study suggested that accumulation of certain pollutants is occurring in the aquatic environment of the area. Surface sediment samples from five foraging areas considered important to the reintroduced Milky Storks have been analyzed for metals contamination. The results show that elevations of Cu, Zn, and Pb ranging from 9.7 to 57 mg kg^?1, 71 to 120 mg kg^?1, and 28 to 47 mg kg^?1 have occurred, except for Cd (0.9–1.7 mg kg^?1). The accumulation of these metals is site-specific which reflects continuous anthropogenic inputs into the aquatic environment of Kuala Gula. In addition, metal levels in some areas have exceeded the effects range low values, and thus urgent action is needed to ensure good practice and sustainable management of Kuala Gula by responsible parties.     

Elements of fishing community resilience to climate change in the coastal zone of Bangladesh

Resilience has been conceptualized in various ways by anthropologists, ecologists, systems scientists and engineers; the boundaries of resilience are subjective and context dependent. Consequently, choosing the standards and metrics for assessing resilience remains key challenges for policy makers. In this study, using multicriteria evaluation of 40 basic criteria of human, physical, financial, natural and social assets, we have identified several elements, such as experienced fishermen, natural abundance of hilsa (Tenualosa ilisha), ability to assert decision on fish selling, nets and boats ownership, social harmony and capacity of buying food as essential livelihood assets for the fishermen at Hatiya Island, Bangladesh. These assets may enhance the relative resilience of the fishing community of the island to climate change by as much as 20–40%. The results of this study will improve our understanding of the elements that lead to resilience at the community level.     

Transfer of radiocobalt from soil to selected plant species in tropical environments

Soil-to-plant transfer factors (TFs) of radiocobalt (60Co) were determined in pot experiments for leafy vegetation, root crops and rice grown in the tropical environment of Bangladesh. Soil properties were also measured to establish a relationship between these properties and TF values. Measured TF values of 60Co for leafy vegetation (average of 2.2 x 10(-2)) were slightly higher than the values obtained for root vegetation (average of 1.6 x 10(-2)). However, TF values obtained for rice (average of 1.17 x 10(-2)) were about a factor of 2 lower than the values obtained for leafy vegetation. TF values of 60Co for leafy vegetation and root crops were observed to decrease with increasing pH, exchangeable K+ and clay content in the soil, even though poor correlations were estimated statistically. No consistent relationship between the TF value for 60Co and organic matter content could be deduced. The results presented here provide a useful addition to existing databases on soil-plant transfer for 60Co, since this information is still rather sparse for tropical environments.     

5-fluorouracil and curcumin with pectin coating as a treatment regimen for titanium dioxide with dimethylhydrazine-induced colon cancer model

Environmental Science and Pollution Research - Colorectal cancer was inducted in Wister rats using titanium dioxide nanoparticles (TiO2NPs) and dimethylhydrazine (DMH) and treatment using...     

Soil erosion hazard evaluation—An integrated use of remote sensing,GIS and statistical approaches with biophysical parameters towards management strategies

Soil erosion hazard maps can be an essential tool in erosion prone areas as they explain and display the distribution of hazards and areas likely to be affected to different magnitudes. Therefore, it is very useful to planners and policy makers initiating remedial measures and for prioritizing areas. In this study, a numerical model was developed for soil erosion hazard assessment, in which Z-score analysis was combined with a geographical information system (GIS) to compute a synthetic soil erosion hazard index (SEHI). For this model, nine factors which have notable impact on soil erosion were selected. To generate the selected factors remote sensing, analytical hierarchy process (AHP) and GIS techniques along with spatial models were applied. To standardize all of the factors and establish the factor weights, the AHP method was adopted. For Z-score analysis with selected standardized factors, the Integrated Land and Water Information System (ILWIS) software was used and nine individual layers with Z-scores were prepared. Afterwards, the layers were integrated with their factor weights by means of a weighted linear combination to derive a SEHI value for each pixel. To classify the discrete SEHI map to represent a meaningful regionalization of soil erosion hazard, the equal distance cluster principle was used and graded into four levels of hazard; very high, high, moderate and low. The results depicted that in general, a moderate hazardous condition of soil erosion was found in the study area and the proposed approach was also able to identify the areas under high and very high hazards that require urgent intervention on a priority basis. Based on this study, comprehensive erosion hazard management strategies were anticipated for the efficient management of present and future erosion disaster in the area.     

Hybrid sensor for metal grade measurement of a falling stream of solid waste particles

A hybrid sensor system for accurate detection of the metal grade of a stream of falling solid waste particles is investigated and experimentally verified. The system holds an infrared and an electromagnetic unit around a central tube and counts all the particles and only the metal particles, respectively. The count ratio together with the measured average particle mass ratio (k) of non-metal and metal particles is sufficient for calculation of grade. The performance of the system is accurately verified using synthetic mixtures of sand and metal particles. Towards an application a case study is performed using municipal solid waste incineration bottom ash in size fractions 1-6mm, which presents a major challenge for nonferrous metal recovery. The particle count ratio was inherently accurate for particle feed rates up to 13 per second. The average value and spread of k for bottom ash was determined as 0.49 ± 0.07 and used to calculate grade within 2.4% from the manually analysed grade. At higher feed rates the sensors start missing particles which fall simultaneously through the central tube, but the hybrid system still counted highly repeatable. This allowed for implementation of a count correction ratio to eliminate the stationary error. In combination with averaging in measurement intervals for suppression of stochastic variations the hybrid system regained its accuracy for particle feed rates up to 143 per second. This performance and its special design, intended to render it insensitive to external interference and noise when applied in an eddy current separator, make the hybrid sensor suitable for applications such as quality control and sensor controlled separation.     

Effect of Pretreatment with UV Radiation on Physical and Mechanical Properties of Photocured Jute Yarn with 1,6-Hexanediol Diacrylate (HDDA)

Jute yarns were grafted with a single impregnating monomer 1,6-hexanediol diacrylate (HDDA) in order to improve the physicomechanical properties. Jute yarns soaked for different soaking times (3, 5, 10, and 30 minutes) in HDDA+MeOH solutions at different proportions (1–10% HDDA in MeOH [v/v] along with photoinitiator Darocur-1664 [3%]) were cured under UV lamp at different UV radiation intensities (two, four, six, and eight passes). Concentration of monomer, soaking time, and intensity of UV radiation were optimized with extent of mechanical properties such as tensile strength, elongation at break, and modulus. Enhanced tensile strength (67%), modulus (108%), and polymer loading (11%) were achieved with 5% HDDA concentration, 5-minute soaking time, fourth pass of UV radiation. To further improve the mechanical properties, the jute yarns were pretreated with UV radiation (5, 10, 15, 30, and 50 passes) and treated with optimized monomer concentration (5%). UV-pretreated samples showed the enhanced properties. The tensile strength and modulus increase up to 84% and 132%, respectively, than that of virgin jute yarn. An experiment involving water absorption capacity shows that water uptake by treated samples was much lower than that of the untreated samples. During the weathering test, treated yarns exhibited less loss of mechanical properties than untreated yarns.     

利用水浮莲净化麻黄素厂污水的中试研究

将麻黄素厂污水稀释5倍在100m2池面的水浮莲净化塘内进行了净化处理.在滞留处理时间为9d的条件下,SS、BOD₅、COD_Cr、NH₄^-N与色度的去除率分别保持在80.94%,89.43％,76.28％,88.51％,84.64%以上,净化水的理化指标达到了二级排放标准.细菌总数与大肠杆菌群数的剩余率也仅为净化前的0.238％和0.129％.蚕豆根尖微核检测结果表明致突变污染指数PI由净化处理前的6.02(6.44降到2.95以下.     

Correction to: Ecotoxicological assessment of oil-based paint using three-dimensional multi-species bio-testing model: pre- and post-bioremediation analysis

Environmental Science and Pollution Research - The original publication of this paper contains a mistake.     

Climate change research in Bangladesh: research gaps and implications for adaptation-related decision-making

Regional Environmental Change - In this paper, we present the results of a systematic literature review of climate change vulnerability-related research conducted in Bangladesh between 1994 and...