A multi-variate statistical model integrating passive sampler and meteorology data to predict the frequency distributions of hourly ambient ozone (O3) concentrations

A multi-variate, non-linear statistical model is described to simulate passive O3 sampler data to mimic the hourly frequency distributions of continuous measurements using climatologic O3 indicators and passive sampler measurements. The main meteorological parameters identified by the model were, air temperature, relative humidity, solar radiation and wind speed, although other parameters were also considered. Together, air temperature, relative humidity and passive sampler data by themselves could explain 62.5-67.5% (R(2)) of the corresponding variability of the continuously measured O3 data. The final correlation coefficients (r) between the predicted hourly O3 concentrations from the passive sampler data and the true, continuous measurements were 0.819-0.854, with an accuracy of 92-94% for the predictive capability. With the addition of soil moisture data, the model can lead to the first order approximation of atmospheric O3 flux and plant stomatal uptake. Additionally, if such data are coupled to multi-point plant response measurements, meaningful cause-effect relationships can be derived in the future.     

Ergonomic analysis of working postures using OWAS in semi-trailer assembly,applying an individual sampling strategy

In semi-trailer assembly, workers are exposed to several physical risk factors. Awkward working postures have not yet been investigated in semi-trailer assembly, although they are known to be a major risk factor for musculoskeletal disorders. We therefore conducted a comprehensive ergonomic analysis of working postures using the Ovako working posture analysing system (OWAS), with an individual sampling strategy. The postural load in semi-trailer assembly was assessed on the basis of 20,601 observations of 63 workers executing a representative set of nine work tasks. According to the OWAS, the postural load of various working postures and body part positions may have a harmful effect on the musculoskeletal system. We therefore give examples of corrective measures that could improve awkward working postures. Applying an individual sampling strategy was revealed to have advantages over a collective strategy, so this is recommended for future ergonomic analyses.     

Effect of vegetation type on throughfall deposition and seepage flux

This paper compares different vegetation types (coniferous and deciduous forest, grassed and pure heathland) in terms of input (throughfall deposition) and output (seepage flux) in a region with intermediate nitrogen load (+/-20kg Nha(-1)y(-1) via bulk precipitation) in comparable conditions in north Belgium. Coniferous forest (two plots Pinus sylvestris and two plots Pinus nigra) received significantly higher nitrogen and sulphur throughfall deposition than deciduous forest and heathland. Grassed and pure heathland had significantly highest throughfall quantities of Ca(2+) and Mg(2+), respectively. The observed differences in throughfall deposition between the different vegetation types were not univocally reflected in the ion seepage flux. Considerable seepage fluxes of NO(3)(-), SO(4)(2-), Ca(2+) and Al(III) were only found under the P. nigra plots. We discuss our hypothesis that the P. nigra forests already evolved to a situation of N saturation, while the other vegetation types did not.     

Influence of light fleck and low light on foliar injury and physiological responses of two hybrid poplar clones to ozone

Five-month old hybrid poplar clones NE388 and NE359 were exposed to square-wave 30, 55, and 80 ppb O(3) (8 h/day, 7 day/week) under constant high light (HL) and light fleck (LF) during 28 May-29 June 1999, and exposed to 30 and 55 ppb O(3) under HL, LF, and constant low light (LL) during 22 May-28 June 2000 within Continuously Stirred Tank Reactors (CSTR) in a greenhouse. Ramets of these two hybrid clones received similar total photosynthetically active radiation (PAR) within the LF and LL treatments. Visible foliar symptoms, leaf gas exchange, and growth were measured. More severe O(3) induced foliar symptoms were observed on ramets within the LF and LL treatments than within the HL treatment for both clones. The LF treatment resulted in significantly greater foliar injury than the LL treatment for NE388. The LF and LL treatments generally resulted in lower photosynthetic rates (Pn) for both clones, but did not affect stomatal conductance (g(wv)); therefore, the ratios of g(wv)/Pn and the O(3) uptake/Pn were greatest in plants grown under the LF treatment, followed by those grown under LL treatment; plants grown under HL had the lowest ratios of g(wv)/Pn and O(3) uptake/Pn. Greater ratios of g(wv)/Pn and O(3) uptake/Pn were consistently associated with more severe visible foliar symptoms. The negative impacts of the LF treatment on growth were greater than those of the LL treatment. Results indicate that not only the integral, but also the pattern of photo flux density, may affect carbon gain in plants. Increased foliar injury may be expected under light fleck conditions due to the limited repair capacity as a result of continuity of O(3) uptake while photosynthesis decreases under LL conditions.     

Preparation and certification of a reference material on PCBs in pig fat and its application in quality control in monitoring laboratories during the Belgian "PCB-crisis"

In this article, the production and validation of a new certified reference material "PCBs in animal fat" for the control of the maximum level of 200 ng/g setup by the European Communities for veterinary products from Belgium is described. Three materials are established: a blank, one material with about 100 ng/g and one with about 200 ng/g (sum of seven PCBs). Data on the production and certification are given. Additionally, this material was used as an unknown test material in the quality assurance program of the Belgium meat monitoring system (before the certification of the material). While the certification was performed with an uncertainty of less than 10%, the round robin exhibited larger deviations. However, these deviations were less than 20% for most of the 30 participating laboratories. Only two had significantly higher deviations.     

Transient population dynamics in periodic matrix models: methodology and effects of cyclic permutations

Many biological populations are subject to periodically changing environments such as years with or without fire, or rotation of crop types. The dynamics and management options for such populations are frequently investigated using periodic matrix models. However the analysis is usually limited to long-term results (asymptotic population growth rate and its sensitivity to perturbations of vital rates). In non-periodic matrix models it has been shown that long-term results may be misleading as populations are rarely in their stable structure. We therefore develop methods to analyze transient dynamics of periodic matrix models. In particular, we show how to calculate the effects of perturbations on population size within and at the end of environmental cycles. Using a model of a weed population subject to a crop rotation, we show that different cyclic permutations produce different patterns of sensitivity of population size and different population sizes. By examining how the starting environment interacts with the initial conditions, we explain how different patterns arise. Such understanding is critical to developing effective management and monitoring strategies for populations subject to periodically recurring environments.