Structure of Mn-Zr mixed oxides catalysts and their catalytic performance in the gas-phase oxidation of chlorocarbons

The catalytic activity and selectivity of manganese zirconia mixed oxides were evaluated for the oxidation of two common chlorinated pollutants found in waste streams, namely 1,2-dichloroethane (DCE) and trichloroethylene (TCE). Mixed oxides with varying Mn-Zr content were prepared by coprecipitation via nitrates, and subsequent calcination at 600 degrees C for 4 h in air. These catalysts were characterised by means of several techniques such as atomic emission spectrometry, N2 adsorption-desorption, powder X-ray diffraction, temperature-programmed desorption of ammonia, pyridine adsorption followed by diffuse reflectance infrared spectroscopy and temperature-programmed reduction with hydrogen. The active catalytic behaviour of Mn-Zr mixed oxides was ascribed to a substantial surface acidity combined with readily accessible active oxygen species. Hence, the mixed oxide with 40 mol% manganese content was found to be an optimum catalyst for the combustion of both chlorocarbons with a T50 value around 305 and 315 degrees C for DCE and TCE oxidation, respectively. The major oxidation products were carbon dioxide, hydrogen chloride and chlorine. It was observed that the formation of both CO2 and Cl2 was promoted with Mn loading.     

Seasonal Variation of Toxic Benzene Emissions in Petroleum Refinery

Petroleum refineries are largest chemical industries that are responsible for the emission of several pollutants into the atmosphere. Benzene is among the most important air pollutants that are emitted by petroleum refineries, since they are involved in almost every refinery process. Volatile organic compounds (VOCs) are a major group of air pollutants, which play a critical role in atmospheric chemistry. These contribute to toxic oxidants, which are harmful to ecosystem, human health and atmosphere. The variability of pollutants is an important factor in determining human exposure to these chemicals. The ambient air concentrations of benzene were measured in several sites around the Digboi petroleum refinery, near the city of Gowahati in northeast India, during winter and summer 2004. The seasonal and spatial variations of the ambient air concentrations of this benzene were investigated and analyzed. An estimation of the contribution of the refinery to the measured atmospheric levels of benzene was also performed. The ambient air mixing ratios of benzene in a large area outside the refinery was generally low, in ppbv range, much lower than the ambient air quality standards. This article presents the temporal and spatial variation of air pollution in and around petroleum refinery and showed that no health risk due to benzene is present in the areas adjacent to the refinery.     

Comparative evaluation of a bioluminescent bacterial assay in terrestrial ecotoxicity testing

Despite the widespread and successful use of luminescence-based bioassays in water testing, their applications to soils and sediments is less proven. In part this is because such bioassays have mainly been carried out in an aqueous-based medium and, as such, favour contaminants that are readily water-soluble. In this study, aqueous solutions and soils contaminated with heavy metals (HM), polar organic contaminants and hydrophobic organic contaminants (HOCs) were tested using a range of luminescence-based bioassays (Vibrio fischeri, Escherichia coli HB101 pUCD607 and Pseudomonas fluorescens 10586r pUCD607). For the first two chemical groups, the assays were highly reproducible when optimised extraction procedures were employed but for HOCs the bioassay response was poor. Quantitative structure-activity relationships (QSARs) obtained from aqueous solutions had a linear response although correlation for the chemicals tested using bacterial bioassays was significantly less sensitive than that of sublethal tests for Tetrahymena pyriformis. Bacterial and Dendrobaena veneta bioassay responses to extracts from HM amended soils showed that a clear relationship between trophic levels could be obtained. There is no doubt that the wide range of bioluminescent-based bioassays offers complementary applications to traditional testing techniques but there is a significant need to justify and optimise the extraction protocol prior to application.     

Waste polyvinylchloride derived pitch as a precursor to develop carbon fibers and activated carbon fibers

Polyvinylchloride (PVC) was successfully recycled through the solvent extraction from waste pipe with an extraction yield of ca. 86%. The extracted PVC was pyrolyzed by a two-stage process (260 and 410 degrees C) to obtain free-chlorine PVC based pitch through an effective removal of chlorine from PVC during the heat-treatment. As-prepared pitch (softening point: 220 degrees C) was spun, stabilized, carbonized into carbon fibers (CFs), and further activated into activated carbon fibers (ACFs) in a flow of CO2. As-prepared CFs show comparable mechanical properties to commercial CFs, whose maximum tensile strength and modulus are 862 MPa and 62 GPa, respectively. The resultant ACFs exhibit a high surface area of 1200 m2/g, narrow pore size distribution and a low oxygen content of 3%. The study provides an effective insight to recycle PVC from waste PVC and develop a carbon precursor for high performance carbon materials such as CFs and ACFs.     

Vanadium recovery from oil fly ash by leaching, precipitation and solvent extraction processes

In order to reduce the environmental impact due to land disposal of oil fly ash from power plants and to valorize this waste material, the removal of vanadium was investigated using leaching processes (acidic and alkaline treatments), followed by a second step of metal recovery from leachates involving either solvent extraction or selective precipitation. Despite a lower leaching efficiency (compared to sulfuric acid), sodium hydroxide was selected for vanadium leaching since it is more selective for vanadium (versus other transition metals). Precipitation was preferred to solvent extraction for the second step in the treatment since: (a) it is more selective; enabling complete recovery of vanadate from the leachate in the form of pure ammonium vanadate; and (b) stripping of the loaded organic phase (in the solvent extraction process) was not efficient. Precipitation was performed in a two-step procedure: (a) aluminum was first precipitated at pH 8; (b) then ammonium chloride was added at pH 5 to bring about vanadium precipitation.     

Effects of sewage sludge blending on the coal combustion: a thermogravimetric assessment

Combustion of urban sewage sludge together with coal in existing infrastructures may be a sustainable management option energetically interesting for these materials, usually considered wastes. Thermogravimetric analysis was used to study the combustion of a semianthracite coal and the modifications undergone when adding a small percentage (2%, 5%, 10%) of sewage sludge. Both Differential Scanning Calorimetric analysis and Differential Thermogravimetry burning profiles showed differences between coal and sewage sludge combustion. However, the effects of adding a percentage of sewage sludge equal or smaller than 10% was hardly noticeable in terms of heat release and weight loss during the coal combustion. This was further proved by non-isothermal kinetic analysis, which was used to evaluate the Arrhenius activation energy corresponding to the co-combustion of the blends. This work shows that thermogravimetric analysis may be used as an easy rapid tool to asses the co-combustion of sewage sludge together with coal.     

Community analysis in stream biomonitoring: what we measure and what we don't

Diatom assemblages from 83 epilithic samples taken from the Mesta River, Bulgaria, were regressed against three sets of predictor variables, i.e. environmental, spatial, and temporal. Redundancy analysis (RDA) of species and environmental data explained 36% of the diatom variance and extracted several important gradients of species distribution, associated with a downstream increase in nutrient levels, pH, temperature, and organic pollution. The inclusion of spatial and temporal variables in the RDA model captured additional 24% of the diatom variance and revealed three more gradients, a spatial gradient represented by higher order polynomial terms of latitude and longitude, and two temporal gradients of annual and seasonal variation. Partial RDAs demonstrated that the unique contribution of each predictor set to the explained diatom variance was the highest in the spatial dataset (16%), followed by the environmental (9%), and the temporal (7%) datasets. The remaining 28% of the variance was explained by the covariance of the predictor sets. This suggests that in biomonitoring of single stream basins, the cheap and simple account of space and time would explain most of the variance in assemblage composition obviating the necessity of expensive and time-consuming environmental assessments. The nature of the underlying environmental mechanisms can be easily inferred from the diatom composition itself.     

Size-related aspects of arm damage, tissue mechanics, and autotomy in the starfish Asterias rubens

 Arm damage is a widely reported but superficially investigated aspect of the biology of the starfish Asterias rubens L. In the present study, the incidence of arm damage was surveyed in populations of A.  rubens at two sites in the Firth of Clyde, Scotland, and three sites in Gullmarsfjorden, Sweden. The mean (±SD) incidence across all sites of individuals with basal arm damage (resulting from detachment at the basal autotomy plane) was 19.69 ± 8.86%, the incidence of those with distal arm damage (resulting from amputation at more distal levels) was 7.74 ± 10.01%. The mean incidence of arms with basal damage was 5.28 ± 4.12%, of those with distal damage 1.83 ± 2.45%. There was a significant negative correlation between size and the incidence of basal damage at all but one site, but no significant correlation between size and distal damage at any site. Mechanical tests on specimens of the aboral body wall from the basal region of the arm (which included the autotomy plane) and from a more distal region revealed that with increasing body size there was a significant increase in yield stress, ultimate stress and Young's modulus (stiffness) but no significant change in yield strain and ultimate strain. There was no significant difference between the relationships for basal and distal specimens. It is hypothesised that in larger individuals increased mechanical toughness replaces autotomy as an effective antipredator strategy. Using two methods to induce autotomy, a significant positive correlation between size and the delay between the onset of stimulation and arm detachment was found; this may represent a size-related decline in the efficiency of the autotomy mechanism through the relaxation of selection pressure. Since size is an unreliable indicator of age in A.  rubens, the trends identified herein can be interpreted only tentatively as age-associated phenomena. Received: 4 September 1999 / Accepted: 17 February 2000     

Effects of dissolved ammonium addition and host feeding with Artemia salina on photoacclimation of the hermatypic coral Stylophora pistillata

 Effects of nutrient treatments on photoacclimation of the hermatypic coral Stylophora pistillata (Esper) were studied. Studies on photoacclimation of colonies from different light regimes in the field were evaluated and used to design laboratory experiments. Coral colonies were collected in the Gulf of Eilat (Israel) from January to March 1993. Exterior branches of colonies from different depths (1 to 40 m) displayed different trends in production characteristics at reduced and very low levels of illumination. From 24 ± 3% to 12 ± 2% of incident surface photosynthetic active radiation (PAR_o), zooxanthella population density and chlorophyll a+c per 10⁶ zooxanthellae increased, a trend seen in the range of light levels optimal for coral growth (90 to 30% PAR_o). The P _max of CO₂ per 10⁶ zooxanthellae decreased, while P _max of CO₂ per 10³ polyps increased, indicating an increase in zooxanthella population density at low light levels. Proliferous zooxanthella frequency (PZF, a measure of zooxanthella division) declined significantly at light levels <18 ± 3% PAR_o. At the lowest levels of illumination (<5% PAR_o), zooxanthella population density decreased, as did the PZF; chl a+c per 10⁶ zooxanthellae was unchanged. In 28-d experiments, exterior coral branches from the upper surfaces of colonies from 3 m depth (65 ± 4% PAR_o) were incubated in aquaria under bright (80 to 90% PAR_o), reduced (20 to 30% PAR_o), and extremely low (2 to 4% PAR_o) light intensities. At each light intensity, the corals were maintained in three feeding treatments: sea water (SW); ammonium enriched SW (SW + N); SW with Artemia salina nauplii (SW + A). An increase in P _max of CO₂ per 10³ polyps was found in corals acclimated to reduced light (20 to 30% PAR_o) in nutrient-enriched SW, while in SW, where the increase in zooxanthella population density was smaller, it did not occur. Nutrient enrichments (SW + N at 2 to 4% PAR_o and SW + A at 20 to 30% PAR_o) increased zooxanthella population density, but had no effect on chl a+c per 10⁶ zooxanthellae. Acclimation for 14 d to reduced (10 to 20% PAR_o) and extremely low (1 to 3% PAR_o) light intensities shifted ¹⁴C photoassimilation into glycerol and other compounds (probably glycerides), rather than sugars. Both ammonium addition and feeding with Artemia salina nauplii resulted in an increase in photosynthetic assimilation of ¹⁴C into amino acids. We conclude that acclimation to reduced light consists of two processes: an increase in photosynthetic pigments and in zooxanthella population density. Both processes require nitrogen, the increase in zooxanthella population density needing more; this adaptation is therefore limited in nitrogen-poor sea water. Received: 19 June 1998 / Accepted: 13 June 2000