Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

Working Life of Women With Disabilities—A Review

The aim of this study was to present the situation of women with disabilities on the labour market. Women with disabilities suffer from social and professional discrimination. They are discriminated because of their gender and disability. The Q1 Labour Force Participation Study (2013) showed that, in Poland, labour force participation for men and women with disabilities was 29.4% and 14.7%, respectively, while the unemployment rate was 16.1% for men and 17.2% for women. Quarterly information on employment, unemployment and economic inactivity was gathered from a Labour Force Survey in the first quarter of 2013; data from the Ministry of Labour and Social Policy were also included. The participants of the survey were 15 years old or older; they were members of a sample household. The methodology was based on definitions recommended by the International Labour Office and Eurostat. It is important that women with disabilities are substantially less professionally active, while the unemployment rate for them is only slightly higher.     

Occupational Exposure to Natural UV Radiation and Premature Skin Ageing

The skin is the part of the human body most vulnerable to ultraviolet (UV) radiation. The spectrum of the negative effects of UV radiation on the skin ranges from acute erythema to carcinogenesis. Between these extreme conditions, there are other common skin lesions, e.g.,photoageing. The aim of this study was to assess the skin for signs of photoageing in a group of 52 men occupationally exposed to natural UV radiation. There were 2 types of examinations: an examination of skin condition (moisture, elasticity, sebum, porosity, smoothness, discolourations and wrinkles) with a device for diagnosing the skin, and a dermatological examination. The results of both examinations revealed a higher percentage of skin characteristics typical for photoageing in outdoor workers compared to the general population.     

Application of mindfulness-based stress reduction to a stress management intervention in a study of a mining sector company

Purpose. The aim of this article was to check whether mindfulness-based stress reduction (MBSR) is an effective intervention in reducing work-related stress in the case of workers in a copper mine. Methods. Sixty six employees were randomized to the experimental group (32 participants) or to the control group (34 participants). Work-related stress was measured using the job content questionnaire (JCQ) and mental health was measured using the general health questionnaire (GHQ-28) Experimental manipulation was 40-h MBSR training. Results. Multivariate repeated-measures analysis of variance revealed a significant increase of JCQ decision latitude (F?=?17.36, p?<?0.001) and social support (supervisor F?=?9.00, p?<?0.004; coworker F?=?5.61, p?<?0.020), and a significant decrease in GHQ-28 anxiety (F?=?5.28, p?<?0.079) and depression (F?=?3.95, p?<?0.048) due to the intervention. Conclusions. The study confirms that MBSR can be effective in reducing stress resulting from the external risk (and/or imagined fear) of losing one’s health or life. The use of MBSR could be recommended in health and safety activities in difficult and dangerous work conditions, such as mining, to promote workers’ well-being.     

Transport of radiocesium in mycelium and its translocation to fruitbodies of a saprophytic macromycete

We present a new protocol to study fluxes of radionuclides and other xenobiotics in saprophytic fungi. This simple method has successfully been used to evaluate transport of radiocesium in hyphae of Pleurotus eryngii and its translocation to fruitbodies.     

Future climate and adverse health effects caused by fine particulate matter air pollution: case study for Poland

Ground level air pollution, especially fine particulate matter (PM_2.5), has been associated with a number of adverse health effects. The dispersion of PM_2.5 through the atmosphere depends on several mutually connected anthropogenic, geophysical and meteorological parameters, all of which are affected by climate change. This study examines how projected climate change would affect population exposure to PM_2.5 air pollution in Poland. Population exposure to PM_2.5 in Poland was estimated for three decades: the 1990s, 2040s and 2090s. Future climate conditions were projected by Regional Climate Model RegCM (Beta), forced by the general atmospheric circulation model ECHAM5. The dispersion of PM_2.5 was simulated with chemical transport model CAMx version 4.40. Population exposure estimates of PM_2.5 were 18.3, 17.2 and 17.1 μg/m³ for the 1990s, 2040s and 2090s, respectively. PM_2.5 air pollution was estimated to cause approximately 39,800 premature deaths in the population of Poland in the year 2000. Our results indicate that in Poland, climate change may reduce the levels of exposure to anthropogenic particulate air pollution in future decades and that this reduction will reduce adverse health effects caused by the air pollution.     

Effectiveness of potassium ferrate (VI) as a green agent in the treatment and disinfection of carwash wastewater

Environmental Science and Pollution Research - Carwash wastewater treatment with potassium ferrate (VI) (K2FeO4) was optimized by response surface methodology. The optimum conditions for chemical...     

Identification of magnetic particulates in road dust accumulated on roadside snow using magnetic, geochemical and micro-morphological analyses

The aim of this study is to test the applicability of snow surveying in the collection and detailed characterization of vehicle-derived magnetic particles. Road dust extracted from snow, collected near a busy urban highway and a low traffic road in a rural environment (southern Finland), was studied using magnetic, geochemical and micro-morphological analyses. Significant differences in horizontal distribution of mass specific magnetic susceptibility (χ) were noticed for both roads. Multi-domain (MD) magnetite was identified as the primary magnetic mineral. Scanning electron microscope (SEM) analyses of road dust from both roads revealed: (1) angular-shaped particles (diameter ∼1-300 μm) mostly composed of Fe, Cr and Ni, derived from circulation of motor vehicles and (2) iron-rich spherules (d ∼ 2-70 μm). Tungsten-rich particles (d < 2 μm), derived from tyre stud abrasion were also identified. Additionally, a decreasing trend in χ and selected trace elements was observed with increasing distance from the road edge.     

Estimation of wind blown dust emissions in Europe and its vicinity

The assessment of the wind blown dust emission for Europe and selected regions of North Africa and Southwest Asia was carried out using a mesoscale model. The mesoscale model was parameterized based on the current literature review. The model provides data on PM₁₀ emission from several dust reservoirs (anthropogenic, agriculture, semi- and natural) with spatial resolution of 10 × 10 km and temporal resolution of 1 h. The spatial variability of PM₁₀ emission depends on soil texture, land cover/land use as well as meteorological conditions. Lands covered with water or permanently wet were excluded from the model. The land covered with vegetation is treated as dust reservoir whose dust emission capacity depends on the type of vegetation and cover. The dust reservoirs are divided into reservoirs with stable and unstable surface. The changes of emission in time depend on meteorological parameters.The wind blown dust emission should be treated as a non-continuous spatio-temporal process. The emissions are estimated with high uncertainty. The estimated PM₁₀ yearly total load emitted by wind from the European territory is highly differentiated in space and time and is equal to 0.74 Tg. The total load of PM₁₀ emitted by wind from North African and Southwest Asian land surface located in the vicinity of European boundaries is assessed as nearly 50% (0.43 Tg) of the total load estimated for the whole Europe.The average yearly PM₁₀ emission factor for Europe was estimated at 0.139 Mg km^?2.The PM₁₀ emission from agricultural areas is estimated at 52% of the total wind blown emission from the domain of the European Union project “Improving and applying methods for the calculation of natural and biogenic emissions and assessment of impacts to the air quality” - NatAir.PM₁₀ emission factor for natural areas of Europe is estimated at 0.021 Mg km^?2. Appropriate factors for agricultural areas and anthropogenic areas are 0.157 Mg km^?2 and 0.118 Mg km^?2, respectively. The latter two factors are probably underestimated due to omitting in the model of other dust emission mechanisms than aeolian erosion.     

The first Neanderthal tooth found North of the Carpathian Mountains

An upper second permanent molar from a human was found alongside numerous tools of the Micoquian tradition and was excavated in Stajnia Cave, which is located over 100 km North of the Carpathian Mountains in southern Poland. The age of these finds has been established within a time-span of late Saalian to early Weichselian, most likely to OIS 5c or 5a, according to the palaeontological, geological, archaeological and absolute dating of the layer from which they were obtained. An examination of the morphology of the human molar indicates that this tooth exhibits many traits frequently occurring in Neanderthal upper molars. Although the occurrence of derived Neanderthal traits in the Stajnia molar cannot be firmly established because of degradation of its cusps, the presence of the above-mentioned features allows the assertion that this tooth belonged to a Neanderthal. The age of the Stajnia tooth and the archaeological context of this find also indicate that this molar is of Neanderthal origin.