Prenatal diagnosis of congenital non-bullous ichthyosiform erythroderma (lamellar ichthyosis)

We report the first positive prenatal diagnosis ofcongenital non-bullous ichthyosiform erythroderma or lamellar ichthyosis. Fetal skin samples were obtained by fetoscopy at 21 weeks' gestation and examined by light and electron microscopy. Light microscopy revealed a thickened interfollicular epidermis with multiple layers of flattened cells and excessive keratinization of the epidermal lining of the follicular infundibulum. Electron microscopy of the thickened epidermis revealed granular cells that contained larger-than-normal keratohyalin granules and multiple layers of parakeratotic cornified cells. Although there was regional variation in the degree of interfollicular keratinization, follicles from all regions showed greater and more complete keratinization, indicating that they express the abnormality early enough in development to permit prenatal diagnosis at about 20 weeks' gestation.     

Studies into the formation of dioxins in the sintering process used in the iron and steel industry. 1. Characterisation of isomer profiles in particulate and gaseous emissions

Dioxin analyses using a DB5MS chromatography column are presented for samples of dust from an electrostatic precipitator and emissions from the main stack of a UK sinter plant. The analyses have been repeated using the SP2331 column, for which the elution order has been determined for the whole range of tetra to octachlorodibenzo-p-dioxins and dibenzofurans, and which provides a larger degree of separation than the DB5MS column. Polychlorinated dibenzofurans are present in significantly larger amounts in both the dust and stack emissions, and are the main contributors to the I-TEQ. Analysis using the SP2331 column for dioxins show considerable similarity to those of Bacher et al. for soot from a wood-burning fire, but differ markedly from those of Addink et al. for simulation of waste incineration. The similarities to Bacher's results are less for the dibenzofurans. Comparison of absolute concentrations with reported vapour pressures shows the retention of significant dioxin in the dust to involve mechanisms other than pure condensation.     

Evaluation of the effect of data pre-treatment procedures on classical pattern recognition and principal components analysis: a case study for the geographical classification of tea

A simple transformation that uses the half-range and central value has been used as a data pre-treatment procedure for principal component analysis (PCA) and pattern recognition techniques. The results obtained have been compared with the results from classical normalisation of data (mean normalisation, maximum normalisation and range normalisation), autoscaling and the minimum-maximum transformation. Three data sets were used in the study. The first was formed by determining 17 elements in 53 tea samples (901 pieces of data). The second and third data sets arose from two long-term drift studies performed to examine instrumental stability at standard and robust conditions. The instruments used were an inductively coupled plasma atomic emission spectrometer and an inductively coupled plasma mass spectrometer. Each drift diagnosis experiment consisted of replicate determinations of a test solution containing 15 analytes at 10 mg l-1 over 8 h without recalibration. Twenty-nine emission lines were determined 99 times, thus, each data set was formed by 2881 pieces of data. Data pre-treatment was applied to the three data sets prior to the use of principal component analysis, cluster analysis, linear discrimination analysis and soft independent modelling of class analogy. The study revealed that the half-range and central value transformation resulted in a better classification of the tea samples than that achieved using the classical normalisation. The loadings in the PCA for the long-term stability study, under both standard and robust conditions, were found to be similar to the drift trends only when the minimum-maximum transformation and the mean or maximum normalizations were used as data pre-treatments.     

Hydrobiogeochemical Controls on Riparian Nutrient and Greenhouse Gas Dynamics: 10 Years Post‐Restoration

Little is known about the impact of agricultural legacy on subsurface biogeochemical processes in the years following restoration of riparian wetlands (WLs). More knowledge is also needed on the relative importance of seasons, precipitation events, and inputs of water and nutrients driving nitrogen (N), phosphorus (P), sulfur (S), and greenhouse gas (GHG) (N₂O, CO₂, CH₄) dynamics in these systems. This investigation of a riparian zone comprising a restored WL area and a nonrestored well‐drained alluvium (AL) area in the United States Midwest revealed that despite successful hydrological restoration a decade earlier, biogeochemical conditions in the WL area remained less anoxic than in natural WLs, and not significantly different from those in the AL area. No significant differences in N, P, S, and C compound concentrations or fluxes were observed between the AL and WL areas. Over the duration of the study, nitrate (NO₃^?) and soluble reactive phosphorus appeared to be primarily driven by hillslope contributions. Ammonium (NH₄⁺), sulfate (SO₄^2?), and CO₂ responded strongly to seasonal changes in biogeochemical conditions in the riparian zone, while N₂O and CH₄ fluxes were most influenced by large rewetting events. Overall, our results challenge overly simplistic assumptions derived from direct interpretation of redox thermodynamics, and show complex patterns of solutes and GHGs at the riparian zone scale.     

Flow Field and Pollution Dispersion in a Central London Street

Urban pollution due to roadways is perceived as a major obstacle to implementing low-energy ventilation design strategies in urban non-domestic buildings. As part of a project to evaluate the use of a computational fluid flow model as an environmental design tool for urban buildings, this paper seeks to address the impact of pollution from roadways on buildings in areas of restricted topography and assess dominant influencing factors and other requirements for testing the flow model predictions. Vertical profiles of carbon monoxide (CO) and temperature at the facade of a building in a Central London street, in addition to above-roof wind speed and direction, were measured over a period of three months. The street has a height-to-width (h/W) ratio of 0.6 and is of asymmetric horizontal alignment. The air flows in the area surrounding the building were modelled using a computational fluid flow model for two orthogonal wind directions. CO concentrations were calculated from the steady-state flow field in order to place point measurements in the context of the flow field, identify persistent features in the measured data attributable to the flow structure and, by comparison with measurements, identify further testing requirements.Some qualitative and quantitative agreement between measured and modelled data was obtained. Measured CO levels at the building facade and vertical variations of CO were small, as predicted by the model. A wake-interference type flow was predicted by the model for wind speeds >2ms-1 with formation of a vortex cell occurring for roof-level wind speeds >5ms-1 for the cross-wind direction, which was reflected in the measured CO levels and facade gradients. A direction-dependent inverse relationship was noted, both in the model and measurements, between above-roof wind speed and facade CO levels although statistical correlations in the time series were poor. CO concentrations at the facade were found to increase with height frequently, as well as decrease, especially for parallel winds. It is expected that mechanical turbulence due to vehicles was largely responsible. In comparison, thermal stratification appeared to play only a minor role in controlling vertical mixing in the street, under low wind speed conditions.