Investigation of arsenic removal in batch wise water treatments by means of sequential hydride generation flow injection analysis

Arsenic water pollution is a big issue worldwide. Determination of inorganic arsenic in each oxidation state is important because As(III) is much more toxic than As(V). An automated arsenic measurement system was developed based on complete vaporization of As by a sequential procedure and collection/preconcentration of the vaporized AsH(3), which was subsequently measured by a flow analysis. The automated sensitive method was applied to monitoring As(III) and As(V) concentrations in contaminated water standing overnight. Behaviors of arsenics were investigated in different conditions, and unique time dependence profiles were obtained. For example, in the standing of anaerobic water samples, the As(III) concentration immediately began decreasing whereas dead time was observed in the removal of As(V). In normal groundwater conditions, most arsenic was removed from the water simply by standing overnight. To obtain more effective removal, the addition of oxidants and use of steel wools were investigated. Simple batch wise treatments of arsenic contaminated water were demonstrated, and detail of the transitional changes in As(III) and As(V) were investigated.     

Thermodynamic analysis of the energy recovery from the aerobic bioconversion of solid urban waste organic fraction

Waste management is of the utmost importance for many countries and especially for highly developed ones due to its implications on society. In particular, proper treatment before disposal of the solid urban waste organic fraction is one of the main issues that is addressed in waste management. In fact, the organic fraction is particularly reactive and if disposed in sanitary landfills without previous adequate treatment, a large amount of dangerous and polluting gaseous, liquid and solid substances can be produced. Some waste treatment processes can also present an opportunity to produce other by-products like energy, recycled materials and other products with both economic and environmental benefits. In this paper, the aerobic treatment of the organic fraction of solid urban waste, performed in a biocell plant with the possibility of recovering heat for civil or industrial needs, was examined from the thermodynamic point of view. A theoretical model was proposed both for the biological process of the organic fraction, as well as for the heat recovery system. The most significant results are represented and discussed.     

Assessment of the potential of ecolabels to promote agrobiodiversity

We conducted a study to assess to what extent current ecolabels contain standards that stimulate conservation and sustainable use of on-farm biodiversity of agricultural landscapes (agrobiodiversity). First, we developed an agrobiodiversity management yardstick to assess and compare the labeling schemes of ecolabels for arable farming. Key characteristics of the yardstick are the five levels linking the abstract notion of agrobiodiversity management to concrete measures on a farm and its foundation upon expert judgment regarding the effect of farming practices on agrobiodiversity. Several environmental themes, among them agrobiodiversity management, are regulated through the standards of labeling schemes of ecolabels. With the aid of this yardstick, the labeling schemes were scrutinized and the number, average efficacy, and compulsory nature of relevant standards was determined for 10 categories of farm management. The results show that all examined ecolabels contain at least some standards that stimulate conservation and sustainable use of agrobiodiversity, but there are large differences between the labels. We consider the results of the five ecolabels to be insufficient to warrant their usefulness as a governance strategy that the Dutch government could refer to and depend on as part of a national agrobiodiversity policy to stimulate agrobiodiversity.     

Dioxin exposure in contaminated sawmill area: the use of molar teeth and bone of bank vole (Clethrionomys glareolus) and field vole (Microtus agrestis) as biomarkers

Developmental disorders of teeth are among the most sensitive targets of polychlorinated dibenzo-p-dioxin and -furan (PCDD/F) exposure. In rats, 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) reduces dose-dependently the size of molars, most severely the third lower molars. Dioxins also have effects on developing bone, including altered bone mineral density as well as reduced bending breaking force and stiffness. The aim of this study was to evaluate the use of the third lower molar and long bones as biomarkers of PCDD/F exposure in two wild vole species, the bank vole (Clethrionomys glareolus) and the field vole (Microtus agrestis) collected from a PCDD/F contaminated former sawmill area. Survey of soil and biota of the sawmill area indicated a PCDD/F contamination with a congener profile characteristic for the chlorophenol wood preservative Ky-5. The PCDD/F concentration in the bank vole was notably higher than in the field vole. The third molar of the bank vole was significantly smaller in dioxin-exposed animals compared to control group, while there was no difference between these two groups in the field vole. No significant alterations were observed in bone density and strength in either species except for reduced bending strength of the femur neck in bank vole males exposed to dioxins. Even though the bone changes are among the sensitive endpoints of dioxin-exposure, high variability due to age, size and gender limits their use as biomarkers of wildlife exposure. In conclusion, the size of molar teeth seems to be a sensitive and robust biomarker for PCDD/F exposure in wild bank vole populations and thus worth of further studies.     

Rotavirus Occurrence in Shellfish with Low Levels of E. coli

The purpose of this study was to evaluate “in field” the accumulation of virus in shellfish and compare it with the concentration of bacterial indicators. Individuals of Mytilus galloprovincialis were placed in two sampling station located in a contaminated coastal bay and in one control station located one kilometer offshore. The presence of Rotavirus and E. coli was assessed weekly both in seawater and in shellfish samples. The Rotavirus genome was detected in water, preliminarily concentrated by tangential flow ultrafiltration method, and in hepatopancreas of mussels by Real-Time PCR. E. coli was enumerated in water matrices by a filtering method and in mussels by the MPN method. Rotaviruses were not recorded in seawater, while in mussels they were detected since third week after placement. E. coli in mussels were always below the limits set in the Regulation (EC) 854/2004. This study suggests the need for a viral indicator to insure the safety for consumption of shellfish.     

Postconsumer polyethylene terephthalate (PET)/polyolefin blends through reactive processing

Increasing awareness of environmental and energy problems has promoted greater governmental interest in selected waste collection and consequently has attracted the interest of several research groups to the challenge of converting recovered plastics into useful materials. The reactive blending of postconsumer polyethylene terephthalate (PET) with different polyolefins (PO) was studied in attempts to obtain a new material with enhanced properties with respect to the starting materials. The success of the project depends mainly on the possibility of obtaining a compatibilized blend between two starting polymers that, from chemical and thermomechanical viewpoints, are very different. This was approached by employing polyolefins bearing functional groups capable of specific interaction or chemical reaction with PET end groups. Ternary blends of very low density polyethylene (VLDPE)/PET/functionalized polyolefin (FPO) in a weight composition of 70/20/10 and binary blends of FPO/PET in a weight composition of 90/10 were prepared and studied to obtain reinforced polyolefin thermoplastic materials. Reactive blending was achieved in a Brabender Plastograph with a mixing chamber of 30 or 50cm³, at 250°C, and 40rpm for 10min. Differential scanning calorimetry, scanning electron microscopy, and tensile tests were used to investigate the phase behavior, the efficiency of compatibilization, and the mechanical properties of the blends.     

An advanced study on the hydrometallurgical processing of waste computer printed circuit boards to extract their valuable content of metals

This study refers to two chemical leaching systems for the base and precious metals extraction from waste printed circuit boards (WPCBs); sulfuric acid with hydrogen peroxide have been used for the first group of metals, meantime thiourea with the ferric ion in sulfuric acid medium were employed for the second one. The cementation process with zinc, copper and iron metal powders was attempted for solutions purification. The effects of hydrogen peroxide volume in rapport with sulfuric acid concentration and temperature were evaluated for oxidative leaching process. 2 M H₂SO₄ (98% w/v), 5% H₂O_2, 25 °C, 1/10 S/L ratio and 200 rpm were founded as optimal conditions for Cu extraction. Thiourea acid leaching process, performed on the solid filtrate obtained after three oxidative leaching steps, was carried out with 20 g/L of CS(NH₂)₂, 6 g/L of Fe³⁺, 0.5 M H₂SO₄, The cross-leaching method was applied by reusing of thiourea liquid suspension and immersing 5 g/L of this reagent for each other experiment material of leaching. This procedure has lead to the doubling and, respectively, tripling, of gold and silver concentrations into solution. These results reveal a very efficient, promising and environmental friendly method for WPCBs processing.     

What is the acceptable margin of error for the oxygen uptake method in evaluating the reactivity of organic waste?

The acceptable margin of error for the organic waste reactivity measured by the oxygen uptake method was assessed. Oxygen uptake was determined by the Dynamic Respiration Index (DRI) (mgO₂/kgVS h). The composed uncertainty (uC) of the experimental set up used for the DRI test was evaluated and the uncertainty (u) of all the components of the apparatus was evaluated. A procedure for calculating the uC of the apparatus is proposed. The components affecting the uC of the DRI to a more significant extent were the one of the oxygen mass rate and the u of the amount of VS in the sample analyzed. For a confidence level of 99.73%, the extended uC (UC) interval for a DRI = 1024 mgO₂/kgVS h was ±440 mgO₂/kgVS h, whereas for a DRI = 3489 mgO₂/kgVS h, the UC interval was ±1288 mgO₂/kgVS h. When oxygen consumption and VS content become lower than 600 mgO₂/h and 0.9 kg, respectively, the UC interval is similar to the measured DRI.