Characterization of a limestone in a batch fluidized bed reactor for sulfur retention under oxy-fuel operating conditions

CO₂ and SO₂ are some of the main polluting gases emitted into atmosphere in combustion processes using fossil fuel for energy production. The former is one of the major contributors to build-up the greenhouse effect implicated in global climate change and the latter produces acid rain. Oxy-fuel combustion is a technology, which consists in burning the fuel with a mix of pure O₂ and recirculated CO₂. With this technology the CO₂ concentration in the flue gas may be enriched up to 95%, becoming possible an easy CO₂ recovery. In addition, oxy-fuel combustion in fluidized beds allows in situ desulfurization of combustion gases by supplying calcium based sorbent.In this work, the effect of the principal operation variables affecting the sulfation reaction rate in fluidized bed reactors (temperature, CO₂ partial pressure, SO₂ concentration and particle size) under typical oxy-fuel combustion conditions have been analyzed in a batch fluidized bed reactor using a limestone as sorbent. It has been observed that sulfur retention can be carried out by direct sulfation of the CaCO₃ or by sulfation of the CaO (indirect sulfation) formed by CaCO₃ calcination. Direct sulfation and indirect sulfation operating conditions depended on the temperature and CO₂ partial pressure. The rate of direct sulfation rose with temperature and the rate of indirect sulfation for long reaction times decreased with temperature. An increase in the CO₂ partial pressure had a negative influence on the sulfation conversion reached by the limestone due to a higher temperature was needed to work in conditions of indirect sulfation. Thus, it is expected that the optimum temperature for sulfur retention in oxy-fuel combustion in fluidized bed reactors be about 925–950 °C. Sulfation reaction rate rose with decreasing sorbent particle size and increasing SO₂ concentration.     

A mixed Bentham–Rawls criterion for intergenerational equity: Theory and implications

This paper proposes a welfare criterion that balances the need for development and the concern for the least advantaged generations, and explores its implications. This criterion, called the mixed Bentham–Rawls criterion, moderates the effect of discounting, yet permits some degree of intertemporal trade-off. It is a weighted average of two terms: (a) the sum of discounted utilities and (b) the utility level of the least advantaged generation. We derive necessary conditions to characterize growth paths that satisfy our criterion, and show that in some models with familiar dynamic specifications, an optimal path exists and displays appealing characteristics.     

An optimized policy for the reduction of CO2 emission in the Brazilian Legal Amazon

The Brazilian government has already acknowledged the importance of investing in the development and application of technologies to reduce or prevent CO₂ emissions resulting from human activities in the Legal Brazilian Amazon (BA). The BA corresponds to a total area of 5 × 10⁶ km² from which 4 × 10⁶ km² was originally covered by the rain forest. One way to interfere with the net balance of greenhouse gases (GHG) emissions is to increase the forest area to sequester CO₂ from the atmosphere. The single most important cause of depletion of the rain forest is cattle ranching. In this work, we present an effective policy to reduce the net balance of CO₂ emissions using optimal control theory to obtain a compromising partition of investments in reforestation and promotion of clear technology to achieve a CO₂ emission target for 2020. The simulation indicates that a CO₂ emission target for 2020 of 376 million tonnes requires an estimated forest area by 2020 of 3,708,000 km², demanding a reforestation of 454,037 km². Even though the regional economic growth can foster the necessary political environment for the commitment with optimal emission targets, the reduction of 38.9% of carbon emissions until 2020 proposed by Brazilian government seems too ambitious.     

Integration of techniques for early fault detection and diagnosis for improving process safety: Application to a Fluid Catalytic Cracking refinery process

In this paper we show the integration of techniques for early fault detection and diagnosis of operational faults in industrial processes, and we show an application example in a Fluid Catalytic Cracking refinery process. The early fault detection and diagnosis allow the operators in an industrial process to take the best actions during the real state of the process, avoiding incipient faults to scale to critical situations where there is risk of human lives and economical lost.     

A Whole Body Postural Loading Simulation and Assessment Model for Workplace Analysis and Design

Abstract

This study reports on the development and validation of a new computer model for simulating human postures at work, and assessing the reaction forces and bending moments in 43 human articulation joints. The proposed model estimates the intradiscal pressure in the vertebral column in response to external loading forces encountered during human interactions with work objects or processes. The model was implemented in a self-contained interactive software package. The simulation results compare favorably with the reported experimental data, and provide reasonable confidence in the quality of the model. Its characteristics and its applications in evaluating physical task performance are also discussed     

Wastewater treatment with a double-layer submerged biological aerated filter,using waste materials as biofilm support

The aim of this research was to determine the performance of a submerged biological aerated filter, composed of a double-layer bed. This bed is made up of a top layer of ceramic material and a bottom layer of plastic material (both from previously used waste material). Effluent concentrations are presented related to the volumetric and hydraulic loads applied. The results were very satisfactory. If effluent concentrations of under 20 mg TBOD5/L and 25 mg SS/L are to be achieved, 4.87 kg TBOD5/m3/d and 3.0 kg SS/m3/d could be applied, respectively. For that maximum TBOD5 volumetric load that can be applied, a very reasonable consumption value of 1.0 kg O2/kg TBOD5, eliminated was obtained. The counter-current flow system outperformed the co-current flow system with respect to TBOD5 and SS removal. The tests were performed at a pilot plant with full scale height. The influent used was primary effluent of a conventional treatment plant. A multivariant analysis (ANOVA) was applied to the results.     

Electrostatic precipitation of ultrafine particles enhanced by simultaneous diffusional deposition on wire screens

A laboratory-scale electrostatic precipitator has been designed and constructed in which the grounded collector plate has been substituted by a set of wire screens placed perpendicularly to the gas flow. Particles are deposited onto the screens by two mechanisms--electrostatic deposition and diffusional deposition--which act simultaneously. On the one hand, electrostatic deposition is effective for relatively large particles, but it is quite ineffective for the smallest ones because their charging probability in the corona field is too low. On the other hand, the diffusional collection efficiency of particles on fibers is high for small particles but low for the larger ones. Therefore, the simultaneous diffusional-electrostatic precipitation may become a useful technique for efficient filtration of particles below 0.1 microm. A preliminary experimental evaluation of this filtering device has shown that submicrometer particles with diameters down to a few nanometers can be collected with number efficiencies greater than 99%.     

Magnetic compass mediates nocturnal homing by the alpine newt, Triturus alpestris

Experiments were carried out to investigate the use of magnetic compass cues in the nocturnal homing orientation of the alpine newt Triturus alpestris. Tests were carried out at a site 9 km to the east–northeast of the breeding pond. Newts were tested at night in an outdoor circular arena that provided an unimpeded view of celestial cues, in one of four symmetrical alignments of an earth-strength magnetic field. In tests carried out under partly cloudy skies newts exhibited homeward magnetic compass orientation. Because the moon was visible in some trials, but obscured by clouds in others, we investigated whether the presence of the moon contributed to the scatter in the distribution of magnetic bearings. When the moon was visible, the distribution of magnetic bearings was more scattered than when the moon was obscured by clouds, although in neither case was the distribution significant due, in part, to the small sample sizes. Moreover, when the moon was visible, newts oriented along a bimodal axis perpendicular to the moon azimuth, suggesting that the presence of the moon may have affected the newts behavior. To provide a more rigorous test of the role of magnetic compass cues when celestial cues were unavailable, nocturnal tests were carried out during the following migratory season under total overcast. In the absence of celestial compass cues, the distribution of magnetic bearings exhibited highly significant orientation in the homeward direction. These findings indicate that newts are able to orient in the homeward direction at night using the magnetic compass as the sole source of directional information. Moon light altered the newts behavior. However, this apparently resulted from the asymmetrical distribution of moon light in the testing arena, rather than the use of an alternative compass.