Novel polyol initiator from polyurethane recycling residue

Flexible polyurethane foams can be advantageously treated by two-phase glycolysis in order to recover polyols with improved quality. The bottom phase obtained, which contains highly toxic reaction by-products and the excess glycol, presents an environmental and economic problem which should be solved. The main purpose of this work is the development of process for the valorization of these by-products, converting them in non-dangerous and profitable substances. For this process, most of the glycol can be recovered by means of vacuum distillation in order to reuse it in the glycolysis. On the other hand, the vacuum residue, containing the isocyanate part of the glycolysis by-products, was assayed as initiator in the synthesis of new polyols. Propoxylation of the initiator was carried out in different experimental conditions to obtain several polyether-polyols. Rigid polyurethane foams with suitable technical properties were synthesized with those polyols synthesized with the dangerous glycolysis by-products.     

Singlet oxygen generation by photoactive polymeric microparticles with enhanced aqueous compatibility

Two new photoactive materials compatible with environmentally friendly solvents (water and methanol) have been synthesized and characterized. They are comprised of a porous matrix of polystyrene and divinylbenzene with bound Rose Bengal and additional pendant groups added to increase the hydrophilicity (ethylenediamine and γ-gluconolactone). The new polymers are efficient photocatalysts capable of generating singlet oxygen after irradiation with visible light. Photochemical oxygenations of 9,10-anthracenedipropionic acid and 2-furoic acid have been carried out. The measured conversions indicate that the new supported photosensitizers are more effective than the parent hydrophobic polymer. Figure

New photoactive polymers for oxidations in aqueous solvent     

Effect of a subchronic exposure to Simazine on energetic metabolism of common carp (Cyprinus carpio)

The energetic parameters, such as glycogen, glucose, proteins, lactate and adenosine triphosphate (ATP) content and lactate deshydrogenase (LDH) activity in tissues and blood of carps from simazine (2-chloro-4,6-bis(ethylamino)-s-triazine) contaminated waters were investigated. In order to confirm the field results, a laboratory experiment was designed in which carps were exposed to simazine at the concentration level of 45 μ g. L^{? 1} (10-fold of the amount found in natural waters) for 90 days. Fish from a contaminated reservoir showed low glycogen concentrations in hepatopancreas and muscle, while fish in another contaminated reservoir showed high LDH activity together with an increase in lactate content in muscle. Laboratory findings did not confirm field results, and fish exposed to simazine did not show alterations in the parameters studied. The results suggest that carps were not stressed by the presence of the simazine at the concentration levels found in both studies and the mechanisms of defense covered the energetic demand.     

Acid mine drainage in the Iberian Pyrite Belt: 2. Lessons learned from recent passive remediation experiences

The Iberian Pyrite Belt (IPB), SW Spain and Portugal, contains about 100 abandoned mine wastes and galleries that release acid mine drainages (AMD) to the Tinto and Odiel rivers. In situ passive remediation technologies are especially suitable to remediate the drainages of these orphan sites. However, traditional remediation systems, designed for coal mines, have been demonstrated inefficient to treat the IPB mine waters. Due to their high acidity and metal loads, large amount of solids precipitate and fast clogging of porosity or passivation (coating) of the reactive grains occurs. To overcome these problems, the dispersed alkaline substrate (DAS) a mixture of fine-grained limestone sand and a coarse inert matrix (e.g., wood shavings) was developed. The small grains provide a large reactive surface and dissolve almost completely before the growing layer of precipitates passivates the substrate. The high porosity retards clogging. However, calcite dissolution only raises pH to values around 6.5, at which the hydroxides of trivalent metals (Al and Fe) precipitate, but it is not high enough to remove divalent metals. Caustic magnesia (MgO) buffers the solution pH between 8.5 and 10. A DAS system replacing limestone with caustic magnesia has been tested to be very efficient to remove divalent metals (Zn, Cd, Mn, Cu, Co, Ni, and Pb) from the water previously treated with calcite.     

Chest injuries of elderly postmortem human surrogates (PMHSs) under seat belt and airbag loading in frontal sled impacts: Comparison to matching THOR tests

Abstract

Objective: The goal of the study was to develop experimental chest loading conditions that would cause up to Abbreviated Injury Scale (AIS) 2 chest injuries in elderly occupants in moderate-speed frontal crashes. The new set of experimental data was also intended to be used in the benchmark of existing thoracic injury criteria in lower-speed collision conditions.

Methods: Six male elderly (age >63) postmortem human subjects (PMHS) were exposed to a 35?km/h (nominal) frontal sled impact. The test fixture consisted of a rigid seat, rigid footrest, and cable seat back. Two restraint conditions (A and B) were compared. Occupants were restrained by a force-limited (2.5?kN [A] and 2?kN [B]) seat belt and a preinflated (16?kPa [A] and 11?kPa [B]; airbag). Condition B also incorporated increased seat friction. Matching sled tests were carried out with the THOR-M dummy. Infra-red telescoping rod for the assessment of chest compression (IRTRACC) readings were used to compute chest injury risk. PMHSs were exposed to a posttest injury assessment. Tests were carried out in 2 stages, using the outcome of the first one combined with a parametric study using the THUMS model to adjust the test conditions in the second. All procedures were approved by the relevant ethics board.

Results: Restraint condition A resulted in an unexpected high number of rib fractures (fx; 10, 14, 15 fx). Under condition B, the adjustment of the relative airbag/occupant position combined with a lower airbag pressure and lower seat belt load limit resulted in a reduced pelvic excursion (85 vs. 110?mm), increased torso pitch and a substantially lower number of rib fractures (1, 0, 4 fx) as intended.

Conclusions: The predicted risk of rib fractures provided by the THOR dummy using the C_max and PC Score injury criteria were lower than the actual injuries observed in the PMHS tests (especially in restraint condition A). However, the THOR dummy was capable of discriminating between the 2 restraint scenarios. Similar results were obtained in the parametric study with the THUMS model.     

Contrasting ozone sensitivity in related evergreen and deciduous shrubs

Plant responses to enhanced ozone levels have been studied in two pairs of evergreen-deciduous species (Pistacia terebinthus vs. P. lentiscus; Viburnum lantana vs. V. tinus) in Open Top Chambers. Ozone induced widespread visible injury, significantly reduced CO₂ assimilation and stomatal conductance (g_s), impaired Rubisco efficiency and regeneration capacity (V_c,max,J_max) and altered fluorescence parameters only in the deciduous species. Differences in stomatal conductance could not explain the observed differences in sensitivity. In control plants, deciduous species showed higher superoxide dismutase (SOD) activity than their evergreen counterparts, suggesting metabolic differences that could make them more prone to redox imbalances. Ozone induced increases in SOD and/or peroxidase activities in all the species, but only evergreens were able to cope with the oxidative stress. The relevancy of these results for the effective ozone flux approach and for the current ozone Critical Levels is also discussed.     

Long term remediation of highly polluted acid mine drainage: a sustainable approach to restore the environmental quality of the Odiel river basin

During 20 months of proper operation the full scale passive treatment in Mina Esperanza (SW Spain) produced around 100 mg/L of ferric iron in the aeration cascades, removing an average net acidity up to 1500 mg/L as CaCO₃ and not having any significant clogging problem. Complete Al, As, Cd, Cr, Cu, Ti and V removal from the water was accomplished through almost the entire operation time while Fe removal ranged between 170 and 620 mg/L. The system operated at a mean inflow rate of 43 m³/day achieving an acid load reduction of 597 g·(m² day)⁻¹, more than 10 times higher than the generally accepted 40 g·(m² day)⁻¹ value commonly used as a passive treatment system designing criteria. The high performance achieved by the passive treatment system at Mina Esperanza demonstrates that this innovative treatment design is a simple, efficient and long lasting remediation option to treat highly polluted acid mine drainage.     

Urban forests and pollution mitigation: analyzing ecosystem services and disservices

The purpose of this paper is to integrate the concepts of ecosystem services and disservices when assessing the efficacy of using urban forests for mitigating pollution. A brief review of the literature identifies some pollution mitigation ecosystem services provided by urban forests. Existing ecosystem services definitions and typologies from the economics and ecological literature are adapted and applied to urban forest management and the concepts of ecosystem disservices from natural and semi-natural systems are discussed. Examples of the urban forest ecosystem services of air quality and carbon dioxide sequestration are used to illustrate issues associated with assessing their efficacy in mitigating urban pollution. Development of urban forest management alternatives that mitigate pollution should consider scale, contexts, heterogeneity, management intensities and other social and economic co-benefits, tradeoffs, and costs affecting stakeholders and urban sustainability goals.     

Treatment of municipal landfill leachate by catalytic wet air oxidation: Assessment of the role of operating parameters by factorial design

The wet air oxidation (WAO) of municipal landfill leachate catalyzed by cupric ions and promoted by hydrogen peroxide was investigated. The effect of operating conditions such as WAO treatment time (15-30 min), temperature (160-200 °C), Cu²⁺ concentration (250-750 mg L⁻¹) and H₂O₂ concentration (0-1500 mg L⁻¹) on chemical oxygen demand (COD) removal was investigated by factorial design considering a two-stage, sequential process comprising the heating-up of the reactor and the actual WAO. The leachate, at an initial COD of 4920 mg L⁻¹, was acidified to pH 3 leading to 31% COD decrease presumably due to the coagulation/precipitation of colloidal and other organic matter. During the 45 min long heating-up period of the WAO reactor under an inert atmosphere, COD removal values up to 35% (based on the initial COD value) were recorded as a result of the catalytic decomposition of H₂O₂ to reactive hydroxyl radicals. WAO at 2.5 MPa oxygen partial pressure advanced treatment further; for example, 22 min of oxidation at 200 °C, 250 mg L⁻¹ Cu²⁺ and 0-1500 mg L⁻¹ H₂O₂ resulted in an overall (i.e. including acidification and heating-up) COD reduction of 78%. Amongst the operating variables in question, temperature had the strongest influence on both the heating-up and WAO stages, while H₂O₂ concentration strongly affected the former and reaction time the latter. Nonetheless, the effects of temperature and H₂O₂ concentration were found to depend on the concentration levels of catalyst as suggested by the significance of their 3rd order interaction term.