电絮凝-H2O2氧化法处理邻苯二甲酸二甲酯废水的机理研究

采用电絮凝—H2O2氧化法处理邻苯二甲酸二甲酯(DMP)废水,利用多种分析手段对处理过程进行跟踪。实验结果表明整个处理过程可以分为两个阶段:当反应时间为0～8h时,以电Fenton氧化反应为主,产生的羟基自由基有效地降解了反应液中的DMP;当反应8h后,以絮凝作用和气浮作用为主。在氧化过程中,DMP中的甲基先被氧化生成邻苯二甲酸,苯环被开环并生成链状低级烃类,最后这些有机小分子几乎完全被矿化为CO2和H2O。     

Florida's weakened motorcycle helmet law: effects on death rates in motorcycle crashes

OBJECTIVES: Effective July 1, 2000, Florida's universal helmet law was amended to exclude riders ages 21 and older with insurance coverage providing at least 10,000 US dollars in medical benefits for injuries sustained in a motorcycle crash. Observed helmet use in Florida was reported to have declined from nearly 100% in 1998, before the law change, to 53% after. This study examined the effects of the law change on the likelihood of death, given involvement in a motorcycle crash. METHODS: Rates of motorcyclist deaths per crash involvement in Florida for 2001-2002 (after the law change) were compared with those for 1998-1999 (before the law change). Before/after death rate ratios (95% CIs) were examined, and logistic regression models estimated the effect of the helmet law change on the odds of death in a crash, while controlling for rider gender, age, and seating position, and number of vehicles. RESULTS: The motorcyclist death rate increased significantly after the law change, from 30.8 to 38.8 deaths per 1,000 crash involvements. Motorcyclist death rates increased for single- and multiple-vehicle crashes, for male and female operators, and for riders of all ages including those younger than 21. After controlling for gender and age, the likelihood of death given involvement in a motorcycle crash was 25% higher than expected after the law change. It is estimated that 117 motorcyclist deaths could have been avoided during 2001-2002 if Florida's universal helmet law had remained in place. CONCLUSIONS: This study provides evidence of the life-saving benefits of universal helmet laws. The results also suggest that age-specific helmet laws are not effective in protecting the youngest drivers. This is not surprising, as these laws are largely unenforceable.     

Parents' views of teen driving risks, the role of parents, and how they plan to manage the risks

PROBLEM: There is limited information about how parents view teen driving risks and intend to handle these risks during the licensing process, and how they will respond to graduated licensing provisions. METHODS: Parents in Connecticut were interviewed when their teens got their learner's permit. The survey was undertaken when the state did not have a midnight restriction or a passenger restriction. RESULTS: Generally, parents were well aware of teen driving risks, thought parents should be thoroughly involved in the licensing process, and plan to be active participants themselves. DISCUSSION: Parents were concerned about the risk of driving after midnight and already restrict that behavior. However, parents do not seem to see or understand the risks of having even one teen passenger in the vehicle. IMPACT ON INDUSTRY: The views and existing practices of parents need to be taken into account in deciding on the provisions of graduated licensing legislation and how to best ensure acceptance and compliance.     

Characteristics of speeders

OBJECTIVE: To determine the characteristics of speeders, defined as drivers of vehicles traveling at least 15 mph above the posted speed limit and relatively faster than surrounding vehicles. METHODS: Vehicle speeds were recorded on 13 roads in Virginia with speed limits ranging from 40 to 55 mph. Speeders were compared with slower drivers, defined as drivers of adjacent vehicles traveling no more than 5 mph above the speed limit. License plates were used to identify vehicle owners; owners were inferred to have been driving if observed gender and estimated age matched those of the registered owner. For these drivers, information on exact driver age and gender, vehicle make and model, and driving record was obtained from the Virginia Department of Motor Vehicles. RESULTS: Five percent of the vehicles observed were traveling at least 15 mph above the limit, and 3% qualified as speeders, as defined in this study. Speeders were younger than drivers in the comparison group, drove newer vehicles, and had more speeding violations and other moving violations on their records. They also had 60% more crashes. DISCUSSION: Speeders are a high-risk group. Their speeding behavior is not likely to be controlled without vigorous, consistent enforcement, including the use of automated technology.     

The interactive effects of conscientiousness,openness to experience,and political skill on job performance in complex jobs: The importance of context

Caveats concerning the ability of personality to predict job performance have been raised because of seemingly modest criterion‐related validity. The goal of the present research was to test whether narrowing the context via the type of job (i.e., jobs with complex task demands) and adding a social skill‐related moderator (i.e., political skill) would improve performance prediction. Further, along with political skill, the broad factor of personality demonstrated in prior research to have the strongest criterion validity (i.e., conscientiousness) was joined with a narrow construct closely related to openness to experience (i.e., learning approach) in a three‐way interactive prediction of supervisor‐rated task performance. With the employee–supervisor dyads among professionals, but not with the control group of non‐professional employees, task performance was predicted by the three‐way interaction, such that those high on all three received the highest performance ratings. Implications, strengths and limitations, and directions for future research are discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

Experimental determination of dust cloud deflagration parameters of selected hydrogen storage materials: Complex metal hydrides,chemical hydrides,and adsorbents

This paper discusses the results of an experimental program carried out to determine dust cloud deflagration parameters of selected solid-state hydrogen storage materials, including complex metal hydrides (sodium alanate and lithium borohydride/magnesium hydride mixture), chemical hydrides (alane and ammonia borane) and activated carbon (Maxsorb, AX-21). The measured parameters include maximum deflagration pressure rise, maximum rate of pressure rise, minimum ignition temperature, minimum ignition energy and minimum explosible concentration. The calculated explosion indexes include volume-normalized maximum rate of pressure rise (K_St), explosion severity (ES) and ignition sensitivity (IS). The deflagration parameters of Pittsburgh seam coal dust and Lycopodium spores (reference materials) are also measured. The results show that activated carbon is the safest hydrogen storage media among the examined materials. Ammonia borane is unsafe to use because of the high explosibility of its dust. The core insights of this contribution are useful for quantifying the risks associated with use of these materials for on-board systems in light-duty fuel cell-powered vehicles and for supporting the development of hydrogen safety codes and standards. These insights are also critical for designing adequate safety features such as explosion relief venting and isolation devices and for supplementing missing data in materials safety data sheets.     

Influence of coal particles on methane/air mixture ignition in a heated environment

The temperature at which coal dust glows is normally much lower than the auto-ignition temperature (AIT) of methane/air mixtures, and thus a better understanding is needed regarding methane/air ignition in a heated environment in the presence of coal particles. A horizontal tube apparatus was used to test the effect of brown coal and two kinds of bituminous and anthracite on methane/air combustibility. For the four coal samples tested, the presence of coal particles significantly reduced the minimum temperature for ignition of methane/air mixtures in a heated environment. No. 1 bituminous coal with 12 mm diameter decreased the ignition temperature value from 595 to 500 °C. It is thought that pre-ignition of low-AIT volatiles emitted from the heated coal particles ignited the methane/air mixtures. Volatiles, sulfur content, and large porosity of piled coal particles all enhanced ignition of methane/air mixtures in a hot environment, while water content and small particle size reduced ignition. For anthracite, no ignition occurred when temperatures of the heated environment were lower than the AIT of methane (595 °C), except for the 12-mm-diameter sample. Anthracite did not readily ignite methane/air mixtures and the ignition mechanism was somewhat similar to that of a burning cigarette.     

RETRACTED:

Jianfeng Li  Sandra M.Y. Lee  Wenmao Liu 《Process Safety and Environmental Protection》2013,91(3):213-220