污染源自动监测数据异常诊断系统研究

简述了污染源自动监测数据异常诊断系统的概念以及异常数据的来源,以及系统的工作原理和基本功能结构。提出了系统模拟专家分析过程的信息处理工作方式,以期实现污染源自动监测数据质量自动诊断与故障识别。     

环境空气中汞的直接测定方法研究与应用

研究了环境空气中汞浓度的直接测定方法。利用金汞齐富集－便携式测汞仪对环境空气中的汞进行直接测定,具有简便、快捷、不使用化学试剂的优点。经测试,该方法在0～180 ng／m^3范围内具有良好的线性关系,最低检出浓度为5 ng／m^3。     

抑制型电导-离子色谱法测定水中无机阴离子

采用抑制型电导-离子色谱法测定生活饮用水、污水和地表水中F-、Cl-、NO2-、Br-、NO3-、PO43-、SO42-等7种无机阴离子,对清洁水样过滤后直接测定,浑浊样品离心后取上清液过滤测定。F-在0.100 mg/L~1.20 mg/L范围内、其余6种阴离子在1.00 mg/L~12.0 mg/L范围内线性良好,方法检出限为0.031 mg/L~0.47 mg/L,水样平行测定的RSD为0.9%~1.8%,加标回收率为82.6%~110%。     

Development of a multi-criteria index ranking system for urban runoff best management practices (BMPs) selection

Low impact development best management practices (LID-BMPs) are considered to be cost-effective measures for mitigating the water quantity and quality impact of urban runoff. Currently, there are many types of LID-BMPs, and each type has its own intrinsic technical and/or economical characteristics and limitations for implementation. The selection of the most appropriate BMP type(s) for a specific installation site is therefore a very important planning step. In the present study, a multi-criteria selection index system (MCIS) for LID-BMP planning was developed. The selection indexes include 12 first-level indices and 26 second-level indices which reflect the specific installation site characteristics pertaining to site suitability, runoff control performance, and economics of implementation. A mechanism for ranking the BMPs was devised. First, each individual second-level index was assigned a numeric value that was based on site characteristics and information on LID-BMPs. The quantified indices were normalized and then integrated to obtain the score for each of the first-level index. The final evaluation scores of each LID-BMP were then calculated based on the scores for the first-level indices. Finally, the appropriate BMP types for a specific installation site were determined according to the rank of the final evaluation scores. In order to facilitate the application of the MCIS BMP ranking system, the computational process has been coded into a software program, BMPSELEC. A case study demonstrating the MCIS methodology, using an LID-BMP implementation planning at a college campus in Foshan, Guangdong Province, is presented.     

微波消解和ASD消解ICP-MS测定土壤中重金属元素的比较

采用微波消解和ASD消解2种消解方式对不同土壤样品进行消解,ICP-MS测定其中重金属含量。微波和ASD2种消解方式均能够较好地提取土壤中的Cr、Co、Ni、Mn和V元素,实验结果的相对误差和相对标准偏差均≤10%,符合实验分析的要求。微波消解精密度优于ASD,可作为优先选择的前处理方法。     

Improve Compliance with Limited Resources by a Three-Group Inspection Regime

Frequent monitoring and relatively high fines are usually necessary to bring about improvements in environmental quality, but more challenging for many countries with limited human, material, and financial resources is to put them into practice. This paper developed a three-group model of a state-dependent enforcement in a repeated game to improve the policy implementation under limited inspection capacities. A certain number of firms are grouped (group 1, group 2, group 3) for different supervision intensity (e.g., the order of inspection probability corresponding to each group is p ₁?<?p ₂?<?p ₃) based on their environmental performance. The optimal policy parameters, such as inspection probability of each group and the probability that a firm found in compliance is moved to a better reputation group, were obtained as the basis for regulator’s policy making. Numerical simulations indicated that the three-group inspection regime can significantly increase compliance rate as compared with static enforcement with the same monitoring probability. Among the number of firms in each group under steady state conditions, group 2 had the most, group 1 was the second, and group 3 had the smallest. Analysis and prediction of a three-group reputation example provided a good experiment for the model. The results give a practical reference for the policy makers with inspection capacity constraints to achieve higher compliance rate.     

环境污染物计算毒理学分析及环境行为模拟研究进展

根据国内外研究报道,系统地总结了计算毒理学和化合物环境行为模拟在环境科学领域的研究进展,包括二者的概念、理论、研究方法以及在环境研究中的应用;分析了计算毒理学和化合物环境行为模拟在发展中所面临的挑战,并提出对策;展望了计算毒理学和化合物环境行为模拟在环境研究中的发展前景。     

DPX快速萃取程序升温大体积进样GC/MS法测定水中19种多溴联苯化合物

建立DPX快速吸附萃取、程序升温(PTV)大体积进样与气相色谱/质谱(GC/MS)联用,SIM模式同时测定水中19种多溴联苯(PBBs)单体的方法。该方法在PBBs质量浓度1~50μg/L范围内线性良好,19种PBBs单体检出限为0.147~0.230μg/L,相对标准偏差为6.61%~10.5%,加标回收率为61.5%~82.6%。     

气相色谱-质谱法测定沉积物中的有机氯和多氯联苯

采用加速溶剂萃取法提取沉积物中的有机氯和多氯联苯,提取液用凝胶色谱法净化后用气相色谱-质谱法测定。方法在5.00μg/L~200μg/L范围内线性良好,当取样量为10.0 g时,方法检出限为0.03μg/kg~0.37μg/kg,空白样品2个质量比水平的加标回收率为70.8%~121%,测定结果的RSD为2.7%~11.5%。用该方法测定实际样品,结果 12个抽检的沉积物样品中多氯联苯均未检出,9个样品中有机氯检出。