退浆废水中聚乙烯醇的分析检测研究

建立了紫外可见分光光度法检测退浆废水中聚乙烯醇(PVA)含量的方法。以硼酸为介质,碘化钾—碘溶液为显色剂,检测波长为680 nm,测定退浆废水中PVA含量的线性方程为Y=0.018 8X+0.003 2,相关系数R2=0.999 3,平均加标回收率为97.6%;方法精密度(RSD=1.5%)、重现性(RSD=1.8%)均较好。该方法操作简单、准确度高、测定快速,适用于测定退浆废水中PVA的含量。     

Effects of pig manure containing copper and zinc on microbial community assessed via phospholipids in soils

Pig manure (PM) is widely used as an organic fertilizer to increase yields of crops. Excessive application of compost containing relatively great concentrations of copper (Cu) and zinc (Zn) can change soil quality. To clarify the effects of different rates of application and to determine the optimal rate of fertilization, PM containing 1,115 mg Cu kg^?1, dry mass (dm) and 1,497 mg Zn kg^?1, dm was applied to alkaline soil at rates of 0, 11, 22, 44, 88, and 222 g PM kg^?1, dm. Phospholipid fatty acids (PLFAs) were used to assess soil microbial community composition. Application of PM resulted in greater concentrations of total nitrogen (TN), NH₄ ⁺-N, NO₃ ^?-N, total carbon (TC), soil organic matter (SOM) but lesser pH values. Soils with application rates of 88–222 g PM kg^?1, dm had concentrations of total and EDTA-extractable Cu and Zn significantly greater than those in soil without PM, and concentrations of T-Cu and T-Zn in these amended soils exceeded maximum limits set by standards in china. Except in the soil with a rate of 11 g PM kg^?1, dm, total bacterial and fungal PLFAs were directly proportional to rate of application of PM. Biomasses of bacteria and fungi were significantly greater in soils with application rates of 44–222 g PM kg^?1, dm than in the soil without PM. SOM, TC and EDTA-Zn had the most direct influence on soil microbial communities. To improve fertility of soils and maintain quality of soil, rate of application should be 22–44 g PM kg^?1 dm, soil containing Cu and Zn.     

石化行业给排水系统设计图纸环境监理审查要点

石化行业废水种类多样、毒性较大,给排水系统的设计会直接影响石化项目建成后周边地表及地下水环境质量。设计文件的环保审查是环境监理的重要依据之一,其中,相关的设计图纸对下一步建设工作具有指导作用,是所有施工单位的施工依据。以某石化行业为例,对给排水系统设计文件的收集进行了分析,并根据设计图纸环保审查中存在的问题,对环境监理如何提高在设计会审中的作用,设计阶段如何对设计图纸进行审查以及审查的重点内容等进行了阐述。     

Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

Annual Nutritional Organ Mass Cycle of <Emphasis Type="Italic">Bufo gargarizans</Emphasis> (Cantor, 1842) in Response to Extreme High Temperature

The annual relative mass of storage organs cycle of Bufo gargarizans in southwestern China was studied from December 2005 to November 2006. We described how those organs changed in response to extreme temperatures. Energy reservation dropped to the lowest levels after dormancy for both sexes, and then increased for period of 4.25 month. However, the mass of these organs dropped again rapidly until August (liver) and September (fat bodies) due to the constraint from extreme high temperature occurred during the summer, and then non-significantly increased before hibernation. For ovaries, varied with a different profile to those of liver and fat bodies have a resting period of four months. In addition, the toads’ ovaries kept growing when the mass of liver and fat bodies declining accordingly during hibernation. Therefore, ovarian mass increased during the hibernation and non-hibernation period.     

生物难降解有机污染物的治理对策

针对废水中难降解化学合成有机污染物的种类和数量不断增加，生物处理出水达标困难的现状，总结了国内外的经验和研究成果，对现有处理装置改造提出了若干建议，并介绍了几种国外废水处理新技术。     

金属粉尘湿法处理系统的设计和除尘效果分析

为改善金属抛光操作人员的工作环境、降低抛光金属粉尘的爆炸风险,设计一种金属粉尘湿法处理系统,并通过建立多相流动数值模型,探究其内部流场特征与金属粉尘运动规律,分析金属粉尘湿法处理系统的除尘效率。研究结果表明:大粒径的金属粉尘直接重力沉降至水槽中;小粒径(PM10)的金属粉尘易随气流进入风道,进而通过水雾脱除;采用洁净进气源,可以有效降低工人操作环境的粉尘浓度;增加细水雾,可以有效提高金属粉尘湿法处理系统的除尘效率,对PM10的除尘效率从30%提升至82%。     

氨废水资源化利用的折流式超重力床集成技术

利用折流式超重力床将氨废水处理的精馏和吸收过程集成在一台设备中,开发出一种设备小型化、流程紧凑的氨废水资源化利用集成技术。与传统技术相比,该技术在大幅节省占地面积和空间的同时,还可大幅节约设备建设所用钢材。工业规模试验结果表明,不同浓度的氨废水经该技术处理后可转化为氨质量分数大于22%的氨水资源,处理出水中氨氮质量浓度低于8.2 mg/L,尾气中未检测到氨,处理结果优于GB 31573—2015《无机化学工业污染物排放标准》。     

全球升温1.5℃与2.0℃情景下长江中下游地区极端降水的变化特征

基于长江中下游地区1961~2100年区域气候模式COSMO-CLM(CCLM)模拟与1961~2005年气象站观测的逐日降水数据,通过统计计算年降水量、强降水量、暴雨日数和极端降水贡献率4个极端降水指数,研究全球升温1.5℃与2.0℃情景下,长江中下游地区极端降水的时空变化特征。结果表明:(1)全球升温1.5℃情景下,年降水量相对于1986~2005年减少5%,强降水量、暴雨日数和极端降水贡献率分别增加7%、33%和4%;概率密度曲线表明,年降水量均值下降,强降水量、暴雨日数和极端降水贡献率均值上升,极端降水方差增大;年降水量、强降水量和暴雨日数在空间上表现为南部增加北部减少,极端降水贡献率则相反。(2)全球升温2.0℃情景下,年降水量下降3%,强降水量、暴雨日数和极端降水贡献率分别上升15%、46%和15%;年降水量均值稍有减少且方差稍有上升,强降水量、暴雨日数和极端降水贡献率均值和方差明显增加;年降水量减少区域位于长江主干以北,强降水量、暴雨日数和极端降水贡献率表现为绝大部分地区增加的空间变化特征。(3)全球升温由1.5℃至2.0℃时,年降水量、强降水量、暴雨日数和极端降水贡献率分别增加3%、7%、10%和11%;随升温幅度的增加极端降水均值和方差上升;极端降水呈增加态势的范围扩大。因此,努力将升温控制在1.5℃对降低极端降水的影响具有重要意义。     

氨改性中孔活性炭对Pb(Ⅱ)的吸附

为讨论表面改性对活性炭吸附特性的影响,用氨改性活性炭对Pb(Ⅱ)的吸附性能进行了研究。通过高温氨气吹扫对活性炭进行表面改性处理,观察了改性后活性炭物化性质的变化,研究了氨改性活性炭对Pb(Ⅱ)的吸附等温关系与动力学,并对吸附前后氨改性活性炭的形貌进行了分析。结果表明,氨改性后活性炭比表面积和总孔孔容均略有增大,活性炭中N元素含量明显增高,含氧官能团数量减少,零电荷点增大。氨改性后活性炭对Pb(Ⅱ)的吸附效果明显提高,吸附过程数据可用等温吸附方程描述,改性后活性炭对Pb(Ⅱ)的吸附符合拟二级动力学。Pb(Ⅱ)在氨改性活性炭表面上的附着明显可见。通过红外光谱分析,活性炭表面含氮官能团与Pb(Ⅱ)发生缔合作用。