壳聚糖-丙烯酰胺-二甲基二烯丙基氯化铵三元接枝共聚物的合成及应用

在N2保护下,以硝硬驱铈铵为引发剂,将壳聚糖（CTS）、丙烯酰胺（AM）及二甲基二烯丙基氯化铵（DMDAAC）接枝共聚得到CTS-AM-DMDAAC三元接枝共聚物,考察了反应条件对接枝共聚反应的影响。实验结果表明,在反应温度50℃、反应时间5-6h,m（CTS）：m（AM）：m（DMAAAC）=1：6：0.67、c（Ce^4＋）=0.8mmol/L的最佳反应条件下,接枝共聚反应的接枝率和接枝效率分别为64%和10.5%。用傅里叶变换红外光谱仪对CTS-AM-DMDAAC进行了表征。絮凝实验结果表明：CTS-AM-DMDAAC对高岭土水样具有较强的絮凝能力,可在很宽的pH范围内使用。用CTS-AM-DMDAAC处理COD为165.5mg/L的啤酒生产废水,COD去除率达90.1%.     

Sustainable method towards magnetic ordered mesoporous polymers for efficient Methylene Blue removal

The difficulty in achieving high removal efficiency for contaminants in textile wastewater over a wide range of pH impedes the progress of its treatment technique greatly. Herein, a facile and sustainable strategy was adopted for constructing magnetic ordered mesoporous polymers (M-OMPs) without the assistance of organic solvent and catalyst. The prepared M-OMPs were endowed with high special surface area and good superparamagnetism simultaneously, and exhibited high removal efficiency (>99%) for Methylene Blue (MB) within a short time (10 min) at a concentration of 50 mg/L. What's more, high removal efficiency was achieved over a wide range of pH 2-12 and the adsorption capacity for MB on M-OMPs was substantially retained even after 5 adsorption-desorption cycles, further demonstrating the application potential of M-OMPs in the decontamination of textile wastewater.     

FTA和FMECA综合法对常压炉的风险分析

首先对炼油厂的常压炉系统进行了火灾爆炸事故的FTA分析,在此基础上进行了深入的FMECA分析,绘制出分析表格,并提出将这两种方法结合起来应用的优点以及一般步骤.综合两种分析方法深入分析了引起火灾爆炸事故的原因,指出系统运行的潜在危险因素,根据分析结果提出综合性的安全改进和预防措施.     

沈阳市有机农业的发展趋势

阐述了造成农产品污染的原因,进而提出发展有机农业的必要性,及国内外有机农业发展的现状和趋势,指出沈阳市发展有机农业的优势所在。     

长江经济带经济与环境协调发展的时空格局及问题区域识别

长江经济带是当前中国经济发展与环境保护矛盾最为尖锐的地区之一,实现区域经济与环境系统间的动态协调,是该区域未来可持续发展过程中亟需解决的关键问题。分别构建经济“规模-结构-效率”以及环境“压力-状态-响应”的分析框架,采用熵值法、GIS、耦合协调度评价模型等方法系统考察2007~2016年长江经济带经济与环境动态协调发展的时空格局,并对协调发展的问题区域进行分类和识别。结果表明：(1)2007~2016年长江经济带经济水平几乎实现了翻倍增长,验证了将其作为中国经济发展主支撑带的合理性。同时,经济水平“东高西低”的格局稳固且路径依赖特性明显。(2)2007~2016年长江经济带环境水平及其提升速率仍相对较低,验证了长江环境保护的重要性。同时,环境水平在空间分布上未呈现明显的规律而是具有“随机”性特征。(3)2007~2016年长江经济带经济与环境间的协调发展程度呈稳步上升态势,协调发展指数由0.446 8上升至0.602 3,由濒临失调阶段进入初级协调阶段,并在空间上呈现出东部地区>中部地区>西部地区的整体格局。(4）基于经济、环境、耦合协调度3类数据间的组合情况,将协调发展问题区域划分为6种基本类型并进行识别,发现各研究年份均有超过30个问题区域,并且与经济滞后相关的问题区域数量占据绝对比重。     

电厂屏式过热器弯头开裂原因失效分析

通过外观检查、硬度、金相等检测方法,从金属管壁超温运行、蒸汽侧氧化行为、析出相及冷弯变形对组织性能影响等方面分析了某电厂1 000 MW超超临界机组屏式过热器弯头开裂原因,得出TP347HFG弯头开裂的主要原因是弯头组织富含较多的σ相、NbC等硬脆析出相,同时冷弯加工导致管子内部产生残余应力,加剧了弯头脆性开裂的倾向。     

Hyperspectral Characteristics of Canopy Components and Structure for Phenological Assessment of an Invasive Weed

Spectral reflectance values of four canopy components (stems, buds, opening flowers, and postflowers of yellow starthistle (Centaurea solstitialis)) were measured to describe their spectral characteristics. We then physically combined these canopy components to simulate the flowering stage indicated by accumulated flower ratios (AFR) 10%, 40%, 70%, and 90%, respectively. Spectral dissimilarity and spectral angles were calculated to quantitatively identify spectral differences among canopy components and characteristic patterns of these flowering stages. This study demonstrated the ability of hyperspectral data to characterize canopy components, and identify different flowering stages. Stems had a typical spectral profile of green vegetation, which produced a spectral dissimilarity with three reproduction organs (buds, opening flowers, and postflowers). Quantitative differences between simulated flower stages depended on spectral regions and phenological stages examined. Using full-range canopy spectra, the initial flowering stage could be separated from the early peak, peak, and late flowering stages by three spectral regions, i.e. the blue absorption (around 480 nm) and red absorption (around 650 nm) regions and NIR plateau from 730 nm to 950 nm. For airborne CASI data, only the red absorption region and NIR plateau could be used to identify the flowering stages in the field. This study also revealed that the peak flowering stage was more easily recognized than any of the other three stages.     

磷矿浆催化氧化湿法脱硝研究

采用液相催化氧化NO_x的方法,通过磷矿浆中过渡金属离子的催化作用,达到净化电厂烟气中NO的目的。考察了烟气含氧量、吸收温度、磷矿浆固液比及气体流量对磷矿浆湿法脱硝的影响。结果表明,试验最佳条件为NO进口质量浓度670 mg/m~3、磷矿浆吸收温度25℃、固液比500 g/L、流量0.3 L/min、含氧量20%;优化条件下的磷矿浆脱除效率最高可达88.9%。随着磷矿浆湿法催化氧化脱硝反应的进行,p H值不断下降,导致磷矿浆逐渐失效,需补入新鲜矿浆,维持吸收液的p H值以保证良好脱硝率。     

基于稳健统计方法对实验室比对中土壤汞的质量控制指标研究

利用稳健四分位间距法和迭代法2种稳健统计方法,通过对全国31个省、自治区、直辖市范围内共334家环境监测单位开展土壤中汞的实验室间比对,对比对测定结果和质控数据进行统计分析,系统性地研究了土壤中汞的质量控制指标。建议实际监测工作中土壤汞的实验室间相对标准偏差范围为7%～19%,相对误差控制指标为±8%,低浓度水平下可适当放宽至±10%,加标回收率控制范围为81%～109%,为日常监测开展土壤汞的质量控制工作提供了评价依据,具有广泛的应用价值和较好的指导作用。     

A 3D aerosol and visibility information system for urban areas using remote sensing and GIS

Currently, the depiction of urban air quality at boundary layer scale uses modelled climatic and land cover data. However, such models are difficult to verify, and only low to moderate accuracy may be achieved due to the complexity of the input data required and the reliance on assumptions about dispersion patterns. The provision of comprehensive air quality data to urban residents in city districts, at a level of detail commensurate with other Location-Based Services (LBS) which are time- and place-sensitive, has therefore not been possible. A method for urban air quality monitoring over cities at boundary layer scale, other than by the use of air quality models is presented here. The system presented uses empirical Aerosol Optical Thickness (AOT) data in near-real time, combining AOT data from AERONET with aerosol vertical profiles computed from twice-daily MODIS satellite images at 500 m resolution, to give three dimensional (3D) air quality data over the urban landscape. There has been no previous attempt to project the horizontal spatial distribution of aerosols from satellite image pixels into a vertical dimension to give a spatially comprehensive three dimensional record of air quality. The paper describes the sources and accuracy of the AOT data input to the system as well as its storage and retrieval on a Geographic Information System (GIS) platform, to provide air quality and visibility information according to user query at any 3D geographical location, including individual buildings or building floor.