Relationship between different size classes of particulate matter and meteorology in three European cities

Evidence on the correlation between particle mass and (ultrafine) particle number concentrations is limited. Winter- and spring-time measurements of urban background air pollution were performed in Amsterdam (The Netherlands), Erfurt (Germany) and Helsinki (Finland), within the framework of the EU funded ULTRA study. Daily average concentrations of ambient particulate matter with a 50% cut off of 2.5 microm (PM2.5), total particle number concentrations and particle number concentrations in different size classes were collected at fixed monitoring sites. The aim of this paper is to assess differences in particle concentrations in several size classes across cities, the correlation between different particle fractions and to assess the differential impact of meteorological factors on their concentrations. The medians of ultrafine particle number concentrations were similar across the three cities (range 15.1 x 10(3)-18.3 x 10(3) counts cm(-3)). Within the ultrafine particle fraction, the sub fraction (10-30 nm) made a higher contribution to particle number concentrations in Erfurt than in Helsinki and Amsterdam. Larger differences across the cities were found for PM2.5(range 11-17 microg m(-3)). PM2.5 and ultrafine particle concentrations were weakly (Amsterdam, Helsinki) to moderately (Erfurt) correlated. The inconsistent correlation for PM2.5 and ultrafine particle concentrations between the three cities was partly explained by the larger impact of more local sources from the city on ultrafine particle concentrations than on PM2.5, suggesting that the upwind or downwind location of the measuring site in regard to potential particle sources has to be considered. Also, relationship with wind direction and meteorological data differed, suggesting that particle number and particle mass are two separate indicators of airborne particulate matter. Both decreased with increasing wind speed, but ultrafine particle number counts consistently decreased with increasing relative humidity, whereas PM2.5 increased with increasing barometric pressure. Within the ultrafine particle mode, nucleation mode (10-30 nm) and Aitken mode (30-100 nm) had distinctly different relationships with accumulation mode particles and weather conditions. Since the composition of these particle fractions also differs, it is of interest to test in future epidemiological studies whether they have different health effects.     

Variation in the response of the invasive species Potamopyrgus antipodarum (Smith) to natural (cyanobacterial toxin) and anthropogenic (herbicide atrazine) stressors

In the context of increasing freshwater pollution, the impact on life-traits (survival, growth and fecundity) and locomotion of Potamopyrgus antipodarum of a 5-week field-concentration exposure to the cyanobacterial toxin microcystin-LR and the triazine herbicide, atrazine was studied. Whatever the age of exposed snails (juveniles, subadults, adults), microcystin-LR induced a decrease in survival, growth and fecundity but had no effect on locomotion. Atrazine induced a decrease in locomotory activity but had no significant effect on the life-traits. These results are discussed in terms of consequences to field populations.     

Exorbitant mortality of hatchery-reared Atlantic salmon smolts Salmo salar L., in the Meuse river system in the Netherlands

Stocking Atlantic salmon Salmo salar L. in the Meuse river system is unsuccessful, since hardly any adults return upstream. To investigate problems during seaward migration, individual salmon smolts were tracked in the Dutch part of the river Meuse, using the Nedap Trail® system. The study included a comparison for two seasons, one with high (2010) and one with low (2011) discharge conditions. Cultivated smolts (Loire-Allier strain, n = 100 per year) were implanted with telemetry tags and released in the tributary Roer in March, at the beginning of the natural smolt run. The study area was split into four river sections each characterized by different conditions: tributary Roer, main river Meuse extensively dammed, main river Meuse free flowing and the estuary. Mortalities differed considerably between sections. In the free flowing river Meuse the mortalities were relatively low (10 and 25 %). Mortalities were high in the tributary (44 and 45 %), the dammed river (46 and 49 %) and in the estuary (89 and 90 %). Only 2 and 3 % of the smolts escaped into the North Sea. Results are discussed in relation to environmental factors light and discharge and the presence of man-made obstacles: weirs, hydropower plants and a sea lock. A lack of current and delays at man-made obstacles result in disorientation of fish, a higher risk of predation and disturbance of the smolt run timing. Mortality causes must decrease for sustaining a salmon population in the Meuse.     

Poultry litter application to loblolly pine forests: growth and nutrient containment

Forestland application of poultry manure offers an alternative to the conventional practice of pastureland application. Before such a practice is considered viable, however, it must be demonstrated that the forest ecosystem is capable of absorbing the nutrients contained in poultry manure, especially nitrogen (N) and phosphorus (P). From the forestry perspective, it must also be demonstrated that tree growth is not diminished. We investigated these questions using loblolly pine (Pinus taeda L.) stands growing in central Mississippi in an area of high poultry production. Stockpiled broiler litter was applied to newly thinned, 8-yr-old stands at 0, 4.6, and 18.6 dry Mg ha-1, supplying 0, 200, and 800 kg N ha-1 and 0, 92, and 370 kg P ha-1, respectively. Levels of nitrate in soil water, monitored at a 50-cm depth with porous cup tension lysimeters, exceeded 10 mg N L-1 during the first two years after application in the 18.6 Mg ha-1 rate but only on two occasions in the first year for the lower rate of application. Phosphate was largely absent from lysimeter water in all treatments. Other macronutrients (K, Ca, Mg, S) were elevated in lysimeter water in proportion to litter application rates. Soil extractable nitrate showed similar trends to lysimeter water, with substantial elevation during the first year following application for the 18.6 Mg ha-1 rate. Mehlich III-extractable phosphate peaked in excess of 100 microg P g-1 soil during the third year of the study for the 18.6 Mg ha-1 rate. The 4.6 Mg ha-1 rate did not affect extractable soil P. Tree growth was increased by the poultry litter. Total stem cross-sectional area, or basal area, was approximately 20% greater after 2 yr for both rates of litter application. Overall, the nutrients supplied by the 4.6 Mg ha-1 rate were contained by the pine forest and resulted in favorable increases in tree growth. The higher rate, by contrast, did pose some risk to water quality through the mobilization of nitrate. These results show that, under the conditions of this study, application of poultry litter at moderate rates of approximately 5 Mg ha-1 to young stands of loblolly pine offers an alternative disposal option with minimal impacts to water quality and potential increases in tree growth.     

Low VOC latex paints from a precipitation polymerization process

Even though paints and coatings have been very useful in protecting various substrates, their use has been accompanied by a heavy environmental price. There is a need to minimize the use of volatile organic compounds (VOCs) in the formulation of these materials. In the latex paint area, we have implemented a conventional precipitation process in emulsions to form binder particles that contain block copolymers and have softer blocks on the particle surface. The softer surface provides the binder film-forming properties without the need for the use of solvents or VOCs. The covalent connections between the soft blocks and the hard blocks are expected to impart good performance in the resulting dry coatings. Indeed, we have shown that our test coating from these binder particles containing block copolymer have similar properties in most performance categories to those of a semi-gloss control paint that has been formulated with typical amounts of VOCs.     

The effects of proximal and distal goals on performance on a moderately complex task

The effect of a proximal plus a distal goal was investigated relative to setting only a distal goal or urging participants to do their best. Young adults (N=39) were paid on a piece rate basis to make toys. An analysis of variance revealed that the amount of money earned by the participants who were urged to ‘do your best’ was significantly greater than the amount of money earned by the participants who were assigned a distal goal. However, the amount of money earned by the participants who were assigned proximal goals, in addition to a distal goal, was significantly greater than the amount of money earned by the participants in the ‘do your best’ condition. The correlation between perceived self‐efficacy and the amount of money earned was 0.45 (p<0.01). Perceived self‐efficacy significantly increased only for those participants in the proximal plus distal goal condition. Proximal goals, through self‐efficacy and performance feedback, appear to have focused attention on task appropriate strategies. The results suggest an informational explanation of proximal goals as opposed to a motivational one through goal commitment. Implications of these findings for mentoring and training are discussed. Copyright © 1999 John Wiley & Sons, Ltd.     

Assessing PAH and PCB emissions from the relocation of harbour sediments using equilibrium passive samplers

Large-scale dredging of contaminated sediments is taking place in the harbor of Oslo, Norway. The dredged sediment masses are transferred into a confined aquatic disposal facility (CAD) in a natural 70-m deep basin within the Oslofjord. Currently there is no established method to determine how much dissolved contaminants are released during relocation and deposition of these sediments. For this reason we tested the use of equilibrium passive samplers consisting of 55 microm thin polyoxymethylene (POM-55) for studying the release of freely dissolved and thus bioavailable PAHs and PCBs at the disposal site, and found this to be a suitable method. In order to use POM-55 for monitoring PCBs, it was necessary to measure their POM-55/water partition coefficients, which was also presented as part of this study. Elevated turbidity (average 4.1 mg l(-1)) was observed at one side of the basin where no natural sill exists. Analysis of POM-55 at this location before and after deposition revealed that there was an increase in freely dissolved concentrations (C(W,free)) during deposition by a factor 37.5 for PAHs and a factor of 2.9 for PCBs. In addition, during deposition phenanthrene-to-anthracene aqueous concentration ratios at this location (values of 3-4) were more similar to those of the deposited sediments (approximately 2) than to those of the CAD water prior to deposition (approximately 14). This was not observed for the other locations where a natural sill exists at approximately 30 m water depth. The POM-55 equilibrium passive samplers are here shown to be useful tools for measuring and understanding the dynamics involved in the release of dissolved contaminants during sediment relocation.     

Black carbon-dominated PCDD/Fs sorption to soils at a former wood impregnation site

The influence of black carbon (BC) on the sorption of 17 native polychlorinated-p-dibenzodioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) was studied in five soil samples from a sawmill site where wood used to be impregnated with chlorophenol preservatives. The presence of BC caused measured total organic carbon (TOC)-water distribution ratios (K(TOC)) to be a median factor of 51 (interquartile range 18-68, n=85) higher than modeled amorphous organic carbon (AOC)-water distribution ratios (K(AOC)). K(TOC) was a factor of 73+/-27 above K(AOC) for PCDFs (n=10) and a factor of 20+/-13 (n=7) for PCDDs. The reason for this difference is probably that attaining a planar configuration after sorption to BC is less thermodynamically favorable for PCDDs than for PCDFs. BC-water distribution ratios were calculated from K(TOC), K(AOC) and BC contents, and ranged from 10(9.9) (2,3,7,8-Tetra-CDD) to 10(11.5) l kg(-1) (Octa-CDF). More than 90% of the PCDD/Fs in the soil was calculated to be BC-sorbed. Dissolved organic carbon (DOC)-water distribution ratios were measured to be in the same order of magnitude as K(AOC). This study shows that strong sorption to BC should be included when assessing ecotoxicological risk or modeling transport to groundwater of PCDD/Fs in soil.     

Microscale investigations of the fate of heavy metals associated to iron-bearing particles in a highly polluted stream

As it flows through a dense steelmaking area, the Fensch River does transport iron-rich particles and colloids, displaying high contents in metallic contaminants (Zn, Cr, Pb, Cu, Ni, and As). Chemical analysis using inductively coupled plasma mass spectrometry (ICP-MS) was carried out on three compartments—waters, suspended materials, and sediments—along the river linear. The variations of metallic trace element concentrations along the river were shown to be partially related to external inputs (industrial and domestic wastewaters and urban surfaces leaching). However, some discrepancies of element partitioning were evidenced. Pb, Cu, and Mn tend to concentrate in suspended particulate and in dissolved fraction, while Cr and As follow the trend of Fe and concentrate within sediments of the most downstream station, just before the junction with Moselle waters. Zn appears strongly associated to iron-rich particles, resulting in a decrease of its concentration in waters for the last station. Along the Fensch linear, the variation of metal partitioning between water and particulate phases is accompanied with strong modifications of the nature and mineralogy of iron-rich particles, as evidenced by microanalyses using electron and X-ray beams. The combination of bulk analyses using ICP-MS and microanalyses applied to the three compartments allowed us to propose a three-step process “settling–weathering–resuspension” to explain Zn partitioning.     

In vivo genotoxicity assessment of titanium,zirconium and aluminium nanoparticles,and their microparticulated forms,in Drosophila

As in vivo system, we propose Drosophila melanogaster as a useful model for study the genotoxic risks associated with nanoparticle exposure. In this study we have carried out a genotoxic evaluation of titanium dioxide (TiO₂), zirconium oxide (ZrO₂) and aluminium oxide (Al₂O₃) nanoparticles and their microparticulated forms in D. melanogaster by using the wing somatic mutation and recombination assay. This assay is based on the principle that loss of heterozygosis and the corresponding expression of the suitable recessive markers, multiple wing hairs and flare-3, can lead to the formation of mutant clones in treated larvae, which are expressed as mutant spots on the wings of adult flies. Third instar larvae were feed with TiO₂, ZrO₂ and Al₂O₃ nanoparticles, and their microparticulated forms, at concentrations ranging from 0.1 to 10 mM. Although a certain level of aggregation/agglomeration was observed in solution, it must be noted than the constant digging activity of larvae ensures that treated medium pass constantly through the digestive tract ensuring exposure. The results showed that no significant increases in the frequency of all spots (e.g. small single, large single, twin, total mwh and total spots) were observed, indicating that these nanoparticles were not able to induce genotoxic activity in the wing spot assay of D. melanogaster. Negative data were also obtained with the microparticulated forms. This indicates that the nanoparticulated form of the selected nanomaterials does not modify the potential genotoxicity of their microparticulated versions. These in vivo results contribute to increase the genotoxicity database on the TiO₂, ZrO₂ and Al₂O₃ nanoparticles.