Lessons after Bhopal: CSB a catalyst for change

The Bhopal tragedy was a defining moment in the history of the chemical industry. On December 3, 1984, a runaway reaction within a methyl isocyanate storage tank at the Union Carbide India Limited pesticide plant released a toxic gas cloud that killed thousands and injured hundreds of thousands. After Bhopal, industrial chemical plants became a major public concern. Both the public and the chemical industry realized the necessity of improving chemical process safety.

Bhopal served as a wake-up call. To prevent the same event from occurring in the United States, many legislative and industrial changes were invoked—one of which was formation of the U.S. Chemical Safety and Hazard Investigation Board (CSB). The ultimate goal of CSB is to use the lessons learned and recommendations from its investigations to achieve positive change within the chemical industry—preventing incidents and saving lives.

Although it seems clear that the lessons learned at Bhopal have improved chemical plant safety, CSB investigations indicate that the systemic problems identified at Bhopal remain the underlying causes of many incidents. These include:

• Lack of awareness of reactive hazards.

• Lack of management of change.

• Inadequate plant design and maintenance.

• Ineffective employee training.

• Ineffective emergency preparedness and community notification.

• Lack of root cause incident investigations and communication of lessons learned.

The aim of this paper is to present common themes from recent cases investigated by CSB and to discuss how these issues might be best addressed in the future.

This paper has not been independently approved by the Board and is published for general informational purposes only. Any material in the paper that did not originate in a Board-approved report is solely the responsibility of the authors and does not represent an official finding, conclusion, or position of the Board.     

Assessment of ambient ozone effects on vegetation using snap bean as a bioindicator species

Tropospheric ozone is an air pollutant that is toxic to plants, causing visible injury to foliage and a reduction in growth and yield. The use of plant bioindicators is one approach to assess the ozone impacts in diverse geographical areas. The objective of this study was to evaluate snap bean (Phaseolus vulgaris L.) as a potential bioindicator species. Three snap bean genotypes known to exhibit a range of ozone sensitivity were grown in pots under charcoal-filtered (CF) or nonfiltered (NF) treatments in open-top chambers, or under ambient air (AA) conditions. Treatment effects on biomass were not significant at 56 days after planting (DAP), but midseason foliar injury increased in the NF and AA treatments relative to CF controls. An increase in ozone from 25 to 30 nL L(-1) in CF controls to approximately 50 nL L(-1) in the NF and AA treatments was found to suppress final pod dry weight per plant by 40 to 60% in the most sensitive genotype S156. The same treatments suppressed final pod dry weight by 20 to 30% in a moderately sensitive genotype Oregon-91, and by 10% or less in a tolerant genotype R123. An S156 to R123 yield ratio of approximately one was observed under CF conditions. The S156 to R123 yield ratio declined to 0.6 to 0.7 in the NF treatment and declined further to 0.4 to 0.5 in the AA treatment, suggesting that ozone impact was underestimated in the open-top chambers. The results suggest that a snap bean bioindicator system has the potential to detect ambient ozone effects at present-day ozone concentrations.     

Synthesis of branched,nano channeled,ultrafine and nano carbon tubes from PET wastes using the arc discharge method

Upcycling polymer wastes into useful, and valuable carbon based materials, is a challenging process. We report a novel catalyst-free and solvent-free technique for the formation of nano channeled ultrafine carbon tubes (NCUFCTs) and multiwalled carbon nanotubes (MWCNTs) from polyethylene terephthalate (PET) wastes, using rotating cathode arc discharge technique. The soot obtain from the anode contains ultrafine and nano-sized solid carbon spheres (SCS) with a mean diameter of 221 nm and 100 nm, respectively, formed at the lower temperature region of the anode where the temperature is approximately 1700 °C. The carbon spheres are converted into long “Y” type branched and non-branched NCUFCTs and MWCNTs at higher temperature regions where the temperature is approximately 2600 °C, with mean diameters of 364 nm and 95 nm, respectively. Soot deposited on the cathode is composed of MWCNTs with a mean diameter of 20 nm and other nanoparticles. The tubular structures present in the anode are longer, bent and often coiled with lesser graphitization compared to the nanotubes in the soot on the cathode.     

Geochemical distribution,bioavailability and potential toxicity of some trace metals in a complex micro-tidal estuary,Southwest India

The spatial and temporal variations of some trace metals in the surface sediments of Cochin Estuary were analyzed along with their geochemical associations to identify the possible sources, bioavailability and the health risks posed by them. The dominance of kaolinite and suggested that clay minerals distribution is influenced by sediment sorting. Total metal analysis revealed enrichment for Cd, Pb and Zn due to anthropogenic activities. The speciation analysis established that notwithstanding the large availability, carbonate as well as organic and sulfides bound fractions showed negligible associations with most of the metals. Hydrous Fe–Mn oxides appeared to play a major role in controlling the fate and transport of these metals in the sediments of Cochin Estuary. Lower contribution of the residual fractions for Cd (21%–26%), Pb (<60%) and Zn (24%–42%) indicated an obvious increase of other geochemical fractions. Risk assessment analysis revealed that regardless of total concentration, none of the analyzed metals were at safe levels in the estuary as appreciable percentages were found to be associated with mobile geochemical forms. The speciation study conspicuously established that the metals originating from non-geogenic sources are largely associated with the labile fractions and hence are more detrimental to the aquatic biota.     

Derivation of synthetic fuel from waste plastic: investigation of engine operating characteristics on DI diesel engine

The utilization of plastic in day to day life is ever-increasing and has generated a large amount of plastic garbage that needs proper disposal to save the environment from harmful pollution. The plastic waste management becomes a pressing concern in the present scenario in developing countries like India. This research article evaluates the potential of synthetic fuel (SF) derived from waste plastics collected from the local shops. In this current investigation, the SF blends are tested in a direct injection diesel engine to analyze the performance and emission characteristics of the engine. Three different blends were made namely SF20, SF40, and SF60 on a volumetric basis and the tests were carried out. From the experimental results, it was found that brake thermal efficiency (BTE) of the fuel blends was reduced as compared with neat diesel operation regardless of loads whereas SF20 showed a similar trend as that of diesel operation. The analysis of the emission characteristics revealed that the SF20 blends reduced dangerous smoke and carbon monoxide emission as compared with other test fuels. From the overall results, SF20 showed superior performance and emission aspects as compared with other SF blends whereas the engine operated smoothly up to 60% of SF blending at all loading conditions.

     

Tissue distribution of perfluoroalkyl acids and health status in wild Mozambique tilapia (Oreochromis mossambicus) from Loskop Dam, Mpumalanga, South Africa

This study examined concentrations of 15 perfluoroalkyl acids (PFAAs) in tissues from male Mozambique tilapia (Oreochromis mossambicus) collected at Loskop Dam, Mpumalanga, South Africa in 2014 and 2016. Nine of the 15 PFAAs were detected frequently and were included in statistical analysis and included two of the most commonly known PFAAs, perfluorooctanesulfonic acid (PFOS) (median, 41.6 ng/g) and perfluorooctanoic acid (PFOA) (median, 0.0825 ng/g). Of the tissues measured, plasma (2016 and 2014 median, 22.2 ng/g) contained the highest PFAA burden followed by (in descending order): liver (median, 11.6 ng/g), kidney (median, 9.04 ng/g), spleen (median, 5.92 ng/g), adipose (median, 2.54 ng/g), and muscle (median, 1.11 ng/g). Loskop Dam tilapia have been affected by an inflammatory disease of the adipose tissue known as pansteatitis, so this study also aimed to investigate relationships between PFAA tissue concentrations and incidence of pansteatitis or fish health status. Results revealed that healthy tilapia exhibited an overall higher (p-value < 0.05) PFAA burden than pansteatitis-affected tilapia across all tissues. Further analysis showed that organs previously noted in the literature to contain the highest PFAA concentrations, such as kidney, liver, and plasma, were the organs driving the difference in PFAA burden between the two tilapia groups. Care must be taken in the interpretations we draw from not only the results of our study, but also other PFAA measurements made on populations (human and wildlife alike) under differing health status.     

Development of a biaxial loading frame for sheet metal

Characterization of the evolving yield loci and forming limit diagrams for sheet materials under biaxial loading is necessary for the development of accurate sheet metal forming process simulations. Biaxial tension testing has been shown to have significant advantages over the current computational and experimental methods for such material characterization; however, the few commercially available loading frames are far too large and expensive to be practical for most metal forming research laboratories. In this paper, the design of a practical servohydraulic biaxial loading frame is presented. The design, control, and operation of the loading frame are discussed in detail, and experimental data is provided to validate the effectiveness of the control system with respect to specimen center shifting.     

Secondary analysis of time of day on simulated driving performance

PROBLEM: Age and gender are frequently controlled for in studies of driving performance, but the effects of time of day or circadian cycles on performance are often not considered. Previous research on time of day effects of simulated driving is contradictory and provides little guidance for understanding the impact of these variables on results. METHODS: Using driving simulator data from 79 subjects ages 18 to 65, this paper focuses on the impact of age, gender, and time of day on the simulated driving performance of subjects who self-selected the time of participation. RESULTS: Time of day effects were consistently evident for drivers' speed overall and across different simulated environments. Drivers in the late afternoon period consistently drove significantly slower than drivers in other time periods. Age and gender affected speed such that women and those participants 50 and older tended to drive more slowly. Time of day also had an effect on reaction time and on speed variability measures. Gender did not have significant effects on reaction time or variability measures, but age effects were present. SUMMARY: Taken together, the results suggest that time of day effects should be considered as part of simulated driving performance, and that interactions between time of day and other variables, notably age, should be controlled for as part of future research. IMPACT ON INDUSTRY: Implications of these findings on current efforts for older driver testing are discussed.     

Origin of major ions in monthly rainfall events at the Bamenda Highlands, North West Cameroon

Rainwater characteristics can reveal emissions from various anthropogenic and natural sources into the atmosphere. The physico-chemical characteristics of 44 monthly rainfall events （collected between January and December 2012） from 4 weather stations （Bamenda, Ndop plain, Ndawara and Kumbo） in the Bamenda Highlands （BH） were investigated. The purpose was to determine the sources of chemical species, their seasonal inputs and suitability of the rainwater for drinking. The mean pH of 5 indicated the slightly acidic nature of the rainwater. Average total dissolved solids （TDS） were low （6.7 mg/L）, characteristic of unpolluted atmospheric moisture/air. Major ion concentrations （mg/L） were low and in the order K＋ 〉 Ca2＋ 〉 Mg2~ 〉 Na＋ for cations and NO3 〉〉 HCO3 〉 SO] 〉 CI- 〉 PO3- 〉 F- for anions. The average rainwater in the area was mixed Ca-Mg-SO4-CI water type. The CI-/Na＋ ratio （1.04） was comparable to that of seawater （1.16）, an indication that N a＋ and CI originated mainly from marine （Atlantic Ocean） aerosols. High enrichments of Ca2＋, Mg2＋ and SO2- to Na＋ ratios relative to seawater ratios （constituting 44% of the total ions） demonstrated their terrigenous origin, mainly from Saharan and Sahelian arid dusts. The K＋/Na＋ ratio （2.24）, which was similar to tropical vegetation ash （2.38）, and NO3 was essentially from biomass burning. Light （〈 100 mm） pre-monsoon and post-monsoon convective rains were enriched in major ions than the heavy （〉 100 mm） monsoon rains, indicating a high contribution of major ions during the low convective showers. Despite the acidic nature, the TDS and major ion concentrations classified the rainwater as potable based on the WHO guidelines.     

Estimating the extent and structure of trade in horticultural orchids via social media

The wildlife trade is a lucrative industry involving thousands of animal and plant species. The increasing use of the internet for both legal and illegal wildlife trade is well documented, but there is evidence that trade may be emerging on new online technologies such as social media. Using the orchid trade as a case study, we conducted the first systematic survey of wildlife trade on an international social‐media website. We focused on themed forums (groups), where people with similar interests can interact by uploading images or text (posts) that are visible to other group members. We used social‐network analysis to examine the ties between 150 of these orchid‐themed groups to determine the structure of the network. We found 4 communities of closely linked groups based around shared language. Most trade occurred in a community that consisted of English‐speaking and Southeast Asian groups. In addition to the network analysis, we randomly sampled 30 groups from the whole network to assess the prevalence of trade in cultivated and wild plants. Of 55,805 posts recorded over 12 weeks, 8.9% contained plants for sale, and 22–46% of these posts pertained to wild‐collected orchids. Although total numbers of posts about trade were relatively small, the large proportion of posts advertising wild orchids for sale supports calls for better monitoring of social media for trade in wild‐collected plants.