Connecting with Country in Mungo National Park,Australia: a case study to measure the emotional dimension of experience and place attachment

Connecting people with nature improves well-being, but how people connect with natural places is not well documented. We asked 43 people (19 Aboriginal Australians, 24 non-Aboriginal people) about the messages they received from Country during an interactive experience in the remote Mungo National Park, Australia, and analysed the physical senses, emotions and cognitive processes they mentioned. The physical senses mentioned by most respondents were sight, hearing and motion (particularly walking). These senses helped people receive messages from Country and connect with place. We used the primary-process emotional systems of Panksepp [2010. Dialogues in Clinical Neuroscience, 12 (4), 533–545] as a framework to capture the emotional dimension of experience. Most people reported positive emotions; they spoke about being nurtured by the group and the land (CARE), and the intense joy (PLAY) of being part of the community, being on Country and being accompanied by Aboriginal people. However, our results indicate the framework does not capture the breadth of positive emotions, particularly those associated with connection to place and spiritual experiences. Both groups mentioned cognitive processes reflecting their beliefs, existing knowledge, or sharing and acquiring new knowledge. Our results indicate that the emotional dimension of experience has the potential to measure connection to place, and provide a subjective measure of well-being. More research is needed to document this dimension of experience, and how it changes with context. Our case study provides further insight for those who manage protected areas and seek to enrich the experience of visitors.     

Pharmaceuticals and other organic chemicals in selected north-central and northwestern Arkansas streams

Recently, our attention has focused on the low level detection of many antibiotics, pharmaceuticals, and other organic chemicals in water resources. The limited studies available suggest that urban or rural streams receiving wastewater effluent are more susceptible to contamination. The purpose of this study was to evaluate the occurrence of antibiotics, pharmaceuticals, and other organic chemicals at 18 sites on seven selected streams in Arkansas, USA, during March, April, and August 2004. Water samples were collected upstream and downstream from the influence of effluent discharges in northwestern Arkansas and at one site on a relatively undeveloped stream in north-central Arkansas. At least one antibiotic, pharmaceutical, or other organic chemical was detected at all sites, except at Spavinaw Creek near Mayesville, Arkansas. The greatest number of detections was observed at Mud Creek downstream from an effluent discharge, including 31 pharmaceuticals and other organic chemicals. The detection of these chemicals occurred in higher frequency at sites downstream from effluent discharges compared to those sites upstream from effluent discharges; total chemical concentration was also greater downstream. Wastewater effluent discharge increased the concentrations of detergent metabolites, fire retardants, fragrances and flavors, and steroids in these streams. Antibiotics and associated degradation products were only found at two streams downstream from effluent discharges. Overall, 42 of the 108 chemicals targeted in this study were found in water samples from at least one site, and the most frequently detected organic chemicals included caffeine, phenol, para-cresol, and acetyl hexamethyl tetrahydro naphthalene (AHTN).     

Compost amendment of Cu-Zn minespoil reduces toxic bioavailable heavy metal concentrations and promotes establishment and biomass production of Bromus carinatus (Hook and Arn.)

A series of lab and greenhouse studies were undertaken to understand how Cu and Zn toxicity influences Bromus carinatus (Hook and Arn.) growth, to what degree an organic amendment (yard waste compost) may reduce Cu and Zn bioavailability in Cu-Zn minespoil and promote plant growth in combination with fertilizer, and how the vertical distribution of compost in the minespoil influences rooting depth. Root Cu and Zn toxicity thresholds were determined to be 1 mgL(-1) and 10 mgL(-1) in solution, respectively. The compost amendment had exceptionally high Cu and Zn binding capacities (0.17 and 0.08 g metal g C(-1), for Cu and Zn, respectively) that were attributed to high compost humic and fulvic acid concentrations. Maximum plant biomass was achieved when minespoil was amended with compost and fertilizer in combination. Fertilizer alone had no effect on plant growth. Mixing compost into the minespoil was essential to promote adequate rooting depth.     

地下水铀污染的原位微生物还原与固定:在美国能源部田纳西橡树岭放射物污染现场的试验

总结了美国斯坦福大学和橡树岭国家实验室等在美国能源部田纳西州橡树岭综合试验基地进行的铀污染原位微生物修复阶段性试验结果.本试验利用微生物以乙醇为电子供体还原地下水和沉积物中的六价铀为不溶解的四价铀,使之原位固定化.随后通过加入溶解氧和硝酸盐来试验微生物还原后的地下水层中还原固定态铀的稳定性.通过预处理和长期间隔注入乙醇...     

Development and validation of the volatile correction model for PM10 – An empirical method for adjusting TEOM measurements for their loss of volatile particulate matter

EU Directives stipulate that PM₁₀ should be measured using the gravimetric reference method as laid out in EN12341 [CEN, 1998. Air Quality – Determination of the PM₁₀ Fraction of Suspended Particulate Matter – Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods. European Committee for Standardisation], or an equivalent method as demonstrated using EC guidance [EC, 2005. Demonstration of Equivalence of Ambient Air Monitoring Methods. European Commission Working Group on Guidance for the Demonstration of Equivalence]. There is however a conflict between the requirement to measure PM₁₀ using the gravimetric reference method and the need for rapid public reporting, and many member states, including the UK, rely on non-gravimetric techniques to measure PM₁₀. In the UK the majority of PM₁₀ measurements are made using the Tapered Element Oscillating Microbalance (TEOM), which does not meet the equivalence criteria [Harrison, D., 2006. UK Equivalence Programme for Monitoring of Particulate Matter. Defra, London]. The implied need to upgrade or replace TEOMs with an equivalent automated measurement technique has significant cost implications. The model described in this paper was based on analysis of daily mean measurements of PM₁₀ by the Filter Dynamics Measurement System (FDMS) and the TEOM at UK sites. It uses the FDMS measurement of the volatile component of PM₁₀ (referred to here as FDMS purge) to correct for differences in the sensitivity to volatile PM₁₀ between the TEOM and the EU gravimetric reference method. The model equation for the correction of TEOM PM₁₀ measurements is: TEOM_VCM = TEOM ? 1.87 FDMS purge due to the regional homogeneity of volatile PM, the FDMS purge concentration may be measured at a site distant to the TEOM, allowing the possibility of using a single FDMS instrument to correct PM₁₀ measurements made by several TEOMs in a defined geographical area. The model was assessed against the criteria for the EC Working Group's Guidance for the Demonstration of Equivalence of Ambient Air Monitoring Methods [EC, 2005. Demonstration of Equivalence of Ambient Air Monitoring Methods. European Commission Working Group on Guidance for the Demonstration of Equivalence]. The model satisfies the equivalence criteria using remote FDMS purge measurements for distances up to 200 km (in 22 out of 23 data sets). These data provide strong evidence that the model is a viable tool for correcting measurements from TEOM instruments on the national and local government networks.     

Filter light attenuation as a surrogate for elemental carbon

Light attenuation (b(att)) measured from filter light transmission is compared with elemental carbon (EC) measurements for more than 180,000 collocated PM2.5 (particulate matter [PM] < or = 2.5 microm in aerodynamic diameter) and PM10 (PM < or = 10 microm in aerodynamic diameter) samples from nearly 200 U.S. locations during the past 2 decades. Although there are theoretical reasons for expecting highly variable relationships between b(att) and EC (such as the effects of "brown carbon" and iron oxides in PM2.5), reasonable correlations are found. These correlations are not a strong function of season or location (e.g., rural vs. urban). Median EC concentrations can be predicted from filter transmittance measurements to within +/- 15-30%. Although EC predicted from b(att) shows larger uncertainties (30-60%), especially at concentrations less than 0.3 microg/m3, the consistent mass absorption efficiency (sigm(att)) derived from the regression analysis demonstrates the feasibility of using b(att) as a surrogate for EC. This study demonstrates that a constant factor of 0.1 g/m2 (equivalent to the 10 m2/g sigma(att) used in the Interagency Monitoring of Protected Visual Environments chemical extinction formula) can be used to estimate EC concentrations from b(att) through a Teflon-membrane filter sample. Greater accuracy is achieved with site-specific sigma(att) derived from a period with collocated EC measurements.     

Source profiles for industrial, mobile, and area sources in the Big Bend Regional Aerosol Visibility and Observational study

Representative PM2.5 and PM10 source emissions were sampled in Texas during the Big Bend Regional Aerosol Visibility and Observa (BRAVO) study. Chemical source profiles for elements, ions, and carbon fractions of 145 samples are reported for paved and unpaved road dust, soil dust, motor vehicle exhaust, vegetative burning, four coal-fired power stations, an oil refinery catalytic cracker, two cement kilns, and residential meat cooking. Several samples were taken from each emitter and source type, and these were averaged by source type, and in source subgroups based on commonality of chemical composition. The standard deviation represents the variability of the chemical mass fractions. BRAVO profiles differed in some respects from profiles measured elsewhere. High calcium abundances in geological dust, high selenium abundances in coal-fired power stations, and high antimony abundances in oil refinery catalytic cracker emissions were found. Abundances of eight thermally evolved carbon fractions [Atmos. Environ. 28 (15) (1994) 2493] differ among combustion sources, and a Monte Carlo simulation demonstrates that these differences are sufficient to differentiate among several carbon-emitters.     

Underestimation of phosphorus fraction change in the supernatant after phosphorus adsorption onto iron oxides and iron oxide–natural organic matter complexes

The phosphorus(P) fraction distribution and formation mechanism in the supernatant after P adsorption onto iron oxides and iron oxide-humic acid(HA) complexes were analyzed using the ultrafiltration method in this study.With an initial P concentration of 20 mg/L(I =0.01 mol/L and pH = 7),it was shown that the colloid(1 kDa-0.45 μm) component of P accounted for 10.6%,11.6%,6.5%,and 4.0%of remaining total P concentration in the supernatant after P adsorption onto ferrihydrite(FH),goethite(GE),ferrihydrite-humic acid complex(FH-HA),goethite-humic acid complex(GE-HA),respectively.The 1 kDa component of P was still the predominant fraction in the supernatant,and underestimated colloidal P accounted for 2.2%,55.1%,45.5%,and 38.7%of P adsorption onto the solid surface of FH,FH-HA,GE and GE-HA,respectively.Thus,the colloid P could not be neglected.Notably,it could be interpreted that Fe~(3+) hydrolysis from the adsorbents followed by the formation of colloidal hydrous ferric oxide aggregates was the main mechanism for the formation of the colloid P in the supernatant.And colloidal adsorbent particles co-existing in the supernatant were another important reason for it.Additionally,dissolve organic matter dissolved from iron oxide-HA complexes could occupy large adsorption sites of colloidal iron causing less colloid P in the supernatant.Ultimately,we believe that the findings can provide a new way to deeply interpret the geochemical cycling of P,even when considering other contaminants such as organic pollutants,heavy metal ions,and arsenate at the sediment/soil-water interface in the real environment.     

Enhancement of conservation knowledge through increased access to botanical information

Herbarium specimens are increasingly recognized as an important resource for conservation science and virtual herbaria are making specimens freely available to a wider range of users than ever before. Few virtual herbaria are designed with conservation use as a primary driver. Exceptionally, Brazil's Reflora Virtual Herbarium (RVH) was created to increase knowledge and conservation of the Brazilian flora. The RVH is closely integrated with the Flora of Brazil 2020 platform on which Brazil's new national Flora is under construction. Both resources are accessible via the Reflora home page and thousands of users move seamlessly between these Reflora resources. To understand how the Reflora resources are currently used and their impact on conservation science, we conducted a literature review and an online survey. We searched for publications of studies in which Reflora resources were used and publications resulting from Brazilian researchers who were part of Reflora's research and mobility program. The survey contained multiple choice questions and questions that required a written response. We targeted Reflora webpage visitors with the survey to capture a wider range of Reflora users than the literature review. Reflora resources were used for a variety of conservation-relevant purposes. Half the 806 scientific publications in which Reflora was cited and 81% of the 1069 survey respondents accessing Reflora resources mentioned conservation-relevant research outputs. Most conservation-relevant uses of the Reflora resources in scientific publications were research rather than implementation focused. The survey of Reflora users showed conservation uses and impacts of virtual herbaria were more numerous and diverse than the uses captured in the literature review. Virtual herbaria are vital resources for conservation science, but they must document use and impacts more comprehensively to ensure sustainability.