长沙市某污水处理厂CASS工艺脱氮除磷效果分析

本课题以长沙市某污水处理厂的实际生产工艺流程为试验现场,全面考察了CASS工艺的工作性能,对CASS工艺处理生活污水进行试验研究,为工艺推广应用提供直接的设计依据。并在已有研究的基础上,重点考察在相同进水条件下,不同工艺对氮磷的处理效果,结果表明,四个CASS池对COD、TN、NH3-N、SS的去除率分别为96.6%、68.1%、84.4%、96.8%,均能达标排放,对TP的去除率为76.3%,超标率为69.3%,针对出水TP不达标的情况,主要讨论了影响除磷的因素并提出了改善措施。     

三氯氢硅建设项目污染源分析与控制

三氯氢硅是制备多晶硅的重要原料,三氯氢硅极易挥发,在空气中易燃,并能与空气形成爆炸混合物,其化学性质很不稳定,遇水或水蒸气发生剧烈的放热反应,形成有毒的腐蚀性氯化氢烟雾;通过对三氯氢硅建设项目工艺流程及产污环节分析,探讨了该类项目生产过程废气、废水、噪声、固体废物等污染物的种类、成分及产生量,在此基础上提出了相应的污染控制措施,对该类项目环境影响评价工作有一定的指导作用。     

潜流人工湿地填料筛选及其对小城镇微污染水的修复性能评价

为了选择适合小城镇潜流人工湿地的填料,选取小城镇较为常见的材料(废砖、卵石、碎石),结合物化性质,研究25℃下填料对磷的吸附效果,并分析了填料种类对野外潜流人工湿地运行的影响。结果表明:(1)25℃时,3种填料对磷的吸附量随着溶液中初始磷浓度的增加而增加,吸附能力依次为废砖>碎石>卵石;(2)野外潜流人工湿地运行过程中,随HRT的延长,组合填料湿地WL1和废砖填料WL2湿地对总磷的净化效果有所提高,且WL2湿地对总磷的去除效果略优于WL1。因此,可以选择废砖作为小城镇潜流人工湿地系统的填料。     

余杭区环评市场质与价的博弈关系分析

随着《环评法》的颁布实施,环评市场不断扩大,本文针对杭州市余杭区环评价格高低有错、环评质量良莠不齐的现象,分析了环评机构间的环评价格博弈关系、环评机构与环保管理部门间的环评质量博弈关系,并指出环保管理部门适当融入到环评市场中有利于突破＂囚徒困境＂及＂小偷与守卫＂博弈,引导环评市场健康、有序发展。     

排污权交易之排放跟踪数据校核研究

本文以排污权交易的核心业务排放跟踪管理为出发点,选择电厂二氧化硫指标进行排放跟踪数据过程校核体系研究,探索进一步提高排污权交易体系中排放数据准确性的机制。     

从未遂事件谈安全防范措施

2006年8月15日,由于操作人员安全意识淡薄,处理过程中严重违章,某石化分公司芳烃联合装置变压吸附制氢(PSA)装置发生一起高压氢气泄漏事件,险些造成恶性事故.     

A systemic health risk assessment for the chromium cycle in Taiwan

Health risk assessment (HRA) has been recognized as a useful tool for identifying health risks of human activities. In particular, this method has been well applied to spatially defined units, such as a production plant, a treatment facility, and a contaminated site. However, the management strategies based on the risk information will be more efficient if the comprehensive picture of total risks from all kinds of sources is depicted. In principle, the total risks can be obtained when all risk sources are assessed individually. Apparently, this approach demands huge amount of efforts. This study develops a methodology that combines substance flow and risk estimation to facilitate examination of risk in a systemic way and provide comprehensive understanding of risk generation and distribution corresponding to flows of substances in the anthroposphere and the environment. Substance flow analysis (SFA) and HRA method is integrated to produce a systemic risk assessment method, from which substance management schemes can be derived. In this study, the chromium cycle in Taiwan is used as an example to demonstrate the method, by which the associated substance flow in the economy and the risk caused by the substance in the environmental system is determined. The concentrations of pollutants in the environmental media, the resultant risks and hazard quotients are calculated with the widely-used CalTOX multimedia model.     

含油污泥无害化处置优化研究及生命周期评价

提出含油污泥的优化处置方案,并通过生命周期评价方法(LCA)对优化方案进行环境影响评价。结果表明,与原处置工艺相比优化后环境负荷降低了99.62%。     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

污水处理厂数据采集系统的设计与应用

以贵州某污水处理厂数据采集系统为例．介绍vXPLC和C≠≠为核心的数据采集系统的构成,通信网络的选型和总体设计思路,以及PLC和C#在该污水处理厂中的成功应用。