Comparative embryotoxicity of a pentabrominated diphenyl ether mixture to common terns (Sterna hirundo) and American kestrels (Falco sparverius)

Concentrations of polybrominated diphenyl ethers (PBDEs) in Forster’s tern (Sterna forsteri) eggs from San Francisco Bay have been reported to range up to 63 μg g⁻¹ lipid weight. This value exceeds the lowest-observed-adverse-effect level (1.8 μg g⁻¹ egg wet weight; ∼32 μg⁻¹ lipid weight) reported in an embryotoxicity study with American kestrels (Falco sparverius). As a surrogate for Forster’s terns, common tern (Sterna hirundo) eggs were treated by air cell injection with corn oil vehicle (control) or a commercial penta-BDE formulation (DE-71) at nominal concentrations of 0.2, 2, and 20 μg g⁻¹ egg. As a positive control, kestrel eggs received vehicle or 20 μg DE-71 g⁻¹ egg. In terns, there were no effects of DE-71 on embryonic survival, and pipping or hatching success; however, treated eggs hatched later (0.44 d) than controls. Organ weights, organ-to-body weight ratios, and bone lengths did not differ, and histopathological observations were unremarkable. Several measures of hepatic oxidative stress in hatchling terns were not affected by DE-71, although there was some evidence of oxidative DNA damage (8-hydroxy-deoxyguanosine; 8-OH-dG). Although DE-71 did not impair pipping and hatching of kestrels, it did result in a delay in hatch, shorter humerus length, and reduced total thyroid weight. Concentrations of oxidized glutathione, reduced glutathione, thiobarbituric acid reactive substances, and 8-OH-dG in liver were greater in DE-71-treated kestrels compared to controls. Our findings suggest common tern embryos, and perhaps other tern species, are less sensitive to PBDEs than kestrel embryos.     

Dioxin/POPs legacy of pesticide production in Hamburg: Part 1—securing of the production area

α-Hexachlorocyclohexane (HCH), β-HCH, and γ-HCH (lindane) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention. Therefore, the chemicals need to be globally addressed, including the disposal of historic wastes. At most sites, the approximately 85 % of HCH waste isomers were dumped. At a former lindane factory in Hamburg and some other factories the HCH, waste was recycled producing residues with high polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF) levels. The soil and ground water under the former pesticide factory was/is highly contaminated with HCH (260 tons), chlorobenzenes (550 tons), and PCDD/PCDF (6 kg toxic equivalents (TEQ)). This contamination did not result from disposal operations but from spillages and leakages during the 30 years of the factory's production history. A containment wall has been constructed around the production area to prevent the dispersal of the pollutants. The ground water is managed by a pump and treat system. Over the last 15 years, approximately 10–30 tons of this pollution reservoir has been pumped and incinerated. For the contaminated production buildings, specific assessment and demolition technologies have been applied. In addition to their HCH waste isomer deposition, former lindane/HCH productions need to be assessed for possible recycling practice of HCH and related PCDD/PCDF contamination of the production area and buildings. Since such recycling activities have taken place at several factories in different countries, the experience of assessment and management of the described production area and contaminated buildings could be valuable. Such assessment could be addressed within the frame of the Stockholm Convention.     

Occurrence and behavior of emerging contaminants in surface water and a restored wetland

Pollution mitigation is an important target for restored wetlands, and although there is much information in relation to nutrient removal, little attention has been paid to emerging contaminants. This paper reports on the occurrence and attenuation capacity of 17 emerging contaminants in a restored wetland and two rivers in North-East Denmark. The compounds belong to the groups of pharmaceuticals, fragrances, antiseptics, fire retardants, pesticides, and plasticizers. Concentrations in surface waters ranged from 2 to 1476 ng L⁻¹. The compounds with the highest concentrations were diclofenac, 2-methyl-4-chlorophenoxyacetic acid (MCPA), caffeine, and tris(2-chloroethyl) phosphate (TCEP). The herbicide concentrations increased after a rain-fall event, demonstrating the agricultural run-off origin of these compounds, whereas the concentration of the other emerging contaminants was rather conservative. The mitigation capacity of the restored wetland for the compounds ranged from no attenuation to 84% attenuation (19% on average). Hence, restored wetlands may be considered as a feasible alternative for mitigating emerging contaminants from river waters.     

Comparison of the release of constituents from granular materials under batch and column testing

Column leaching testing can be considered a better basis for assessing field impact data than any other available batch test method and thus provides a fundamental basis from which to estimate constituent release under a variety of field conditions. However, column testing is time-intensive compared to the more simplified batch testing, and may not always be a viable option when making decisions for material reuse. Batch tests are used most frequently as a simple tool for compliance or quality control reasons. Therefore, it is important to compare the release that occurs under batch and column testing, and establish conservative interpretation protocols for extrapolation from batch data when column data are not available. Five different materials (concrete, construction debris, aluminum recycling residue, coal fly ash and bottom ash) were evaluated via batch and column testing, including different column flow regimes (continuously saturated and intermittent unsaturated flow). Constituent release data from batch and column tests were compared. Results showed no significant difference between the column flow regimes when constituent release data from batch and column tests were compared. In most cases batch and column testing agreed when presented in the form of cumulative release. For arsenic in carbonated materials, however, batch testing underestimates the column constituent release for most LS ratios and also on a cumulative basis. For cases when As is a constituent of concern, column testing may be required.     

Beurteilung von Gefahren aus militärischen Altlasten in Einzugsgebieten von Trinkwassergewinnungsanlagen auf der Basis eines Kriterienkataloges

To include consequences emanating from former military sites on the drinking water supply, a catalog of criteria has been developed which permits the determination and assessment of the hazards in general and their impact on human health in particular. The assessment criteria correspond to the special requirements and standards for drinking water hygiene and protection in Germany. The criterion catalog is a completion module to the usual praxis and existing conceptions, and has proved its practical value in the initial assessment of military sites in the new federal states of Germany. The scheme is a control instrument suitable for obtaining an assessment concerning the extent to which drinking-water resources are and will be affected by former waste disposal and other contaminated sites at the present and in the future.     

Prediction of stream fish assemblages from land use characteristics: implications for cost-effective design of monitoring programmes

Increasing human impact on stream ecosystems has resulted in a growing need for tools helping managers to develop conservations strategies, and environmental monitoring is crucial for this development. This paper describes the development of models predicting the presence of fish assemblages in lowland streams using solely cost-effective GIS-derived land use variables. Three hundred thirty-five stream sites were separated into two groups based on size. Within each group, fish abundance data and cluster analysis were used to determine the composition of fish assemblages. The occurrence of assemblages was predicted using a dataset containing land use variables at three spatial scales (50 m riparian corridor, 500 m riparian corridor and the entire catchment) supplemented by a dataset on in-stream variables. The overall classification success varied between 66.1–81.1% and was only marginally better when using in-stream variables than when applying only GIS variables. Also, the prediction power of a model combining GIS and in-stream variables was only slightly better than prediction based solely on GIS variables. The possibility of obtaining precise predictions without using costly in-stream variables offers great potential in the design of monitoring programmes as the distribution of monitoring sites along a gradient in ecological quality can be done at a low cost.     

Status and trends in Arctic vegetation: Evidence from experimental warming and long-term monitoring

Changes in Arctic vegetation can have important implications for trophic interactions and ecosystem functioning leading to climate feedbacks. Plot-based vegetation surveys provide detailed insight into vegetation changes at sites around the Arctic and improve our ability to predict the impacts of environmental change on tundra ecosystems. Here, we review studies of changes in plant community composition and phenology from both long-term monitoring and warming experiments in Arctic environments. We find that Arctic plant communities and species are generally sensitive to warming, but trends over a period of time are heterogeneous and complex and do not always mirror expectations based on responses to experimental manipulations. Our findings highlight the need for more geographically widespread, integrated, and comprehensive monitoring efforts that can better resolve the interacting effects of warming and other local and regional ecological factors.     

Revision of deposition and weathering parameters for the ingestion dose module (ECOSYS) of the ARGOS and RODOS decision support systems

The ECOSYS model is the ingestion dose model integrated in the ARGOS and RODOS decision support systems for nuclear emergency management. The parameters used in this model have however not been updated in recent years, where the level of knowledge on various environmental processes has increased considerably. A Nordic work group has carried out a series of evaluations of the general validity of current ECOSYS default parameters. This paper specifically discusses the parameter revisions required with respect to the modelling of deposition and natural weathering of contaminants on agricultural crops, to enable the trustworthy prognostic modelling that is essential to ensure justification and optimisation of countermeasure strategies. New modelling approaches are outlined, since it was found that current ECOSYS approaches for deposition and natural weathering could lead to large prognostic errors.     

A Native Species with Invasive Behaviour in Coastal Dunes: Evidence for Progressing Decay and Homogenization of Habitat Types

A new species has recently invaded coastal dune ecosystems in North West Europe. The native and expansive inland grass, Deschampsia flexuosa, progressively dominating inland heaths, has recently invaded coastal dunes in Denmark, occasionally even as a dominant species. A total of 222 coastal locations with 5,000 random sample plots have been investigated. These findings are in contrast to historical records, and D. flexuosa has never been considered belonging to coastal dune ecosystems. The occurrence of the typical inland grass in the coastal dunes is a strong indication of increase in nutrient level and that human influences may cause a native species to be invasive in new ecosystems. This could be a radical example of change in species composition due to a long lasting exceedance of critical load of nitrogen. The investigation also showed a general increase in cover of the most dominant species.     

Status of nanoremediation and its potential for future deployment: Risk‐benefit and benchmarking appraisals

NanoRem (Taking Nanotechnological Remediation Processes from Lab Scale to End User Applications for the Restoration of a Clean Environment) was a research project, funded through the European Commission's Seventh Framework Programme, which focuses on facilitating practical, safe, economic, and exploitable nanotechnology for in situ remediation of polluted soil and groundwater, which closed in January 2017. This article describes the status of the nanoremediation implementation and future opportunities for deployment based on risk‐benefit appraisal and benchmarking undertaken in the NanoRem Project. As of November 2016, NanoRem identified 100 deployments of nanoremediation in the field. While the majority of these are pilot‐scale deployments, there are a number of large scale deployments over the last five to 10 years. Most applications have been for plume control (i.e., pathway management in groundwater), but a number of source control measures appear to have taken place. Nanoremediation has been most frequently applied to problems of chlorinated solvents and metals (such as chromium VI). The perception of risk‐benefit balance for nanoremediation has shifted as the NanoRem Project has proceeded. Niche benefits are now more strongly recognized, and some (if not most) of the concerns, for example, relating to environmental risks of nanoremediation deployment, prevalent when the project was proposed and initiated, have been addressed. Indeed, these now appear overstated. However, it appears to remain the case that in some jurisdictions the use of nanoparticles remains less attractive owing to regulatory concerns and/or a lack of awareness, meaning that regulators may demand additional verification measures compared to technologies with which they have a greater level of comfort.