1990~2013年来洞庭湖区鸟类生物多样性热点区时空动态及变动机理

评估与确定生物多样性分布格局与热点区是建立保护区、制定生物保护决策的基础。洞庭湖地区位处长江中游,是我国重要的淡水湖泊湿地生态系统,为中国乃至亚洲较大的鸟类越冬地之一。以洞庭湖地区14种Ⅰ、Ⅱ级重点保护鸟类为指示物种,基于1990~2013年间的多期遥感影像,运用物种生境分布MAXENT模型,选取地形、水系、植被、气候及人类干扰等共35个影响因子,对其进行生境适宜性评价及生物多样性热点区的筛选与制图,并对热点区时空动态特征进行分析。结果表明：（1）鸟类生物多样性热点区的分布范围呈现出组团状特征,1990~2013年来,热点区面积呈下降趋势;（2）鸟类栖息生境景观格局总体上趋于破碎,生境形状向简单且扁平化形态转变,生境格局呈复杂化;（3）经济与社会发展因素对研究区的鸟类生物多样性热点区变化影响显著,而自然因素产生的影响不明显。研究结果在制定区域生物多样性保护规划方案中可体现较好应用价值。     

CdIn2S4/复合材料的制备及光降解罗丹明B

利用高压静电纺丝技术,制得含有羧基的导电聚合物纤维(聚偏氟乙烯/苯乙烯-马来酸酐共聚物/纳米石墨),高温水热条件下在纤维表面制备CdIn2S4颗粒,得到CdIn2S4/导电聚合物纤维复合材料。运用扫描电子显微镜(SEM)、X射线衍射仪(XRD)、紫外-可见吸收光谱仪(UV-Vis)和热失重分析仪(TGA)对复合材料的结构进行表征。并利用350 W氙灯模拟太阳光进行光催化降解罗丹明B。结果发现,CdIn2S4/导电聚合物纤维复合材料的降解效率高于CdIn2S4粉体和Degussa P25 TiO2粉体,光催化降解3 h,罗丹明B的降解率为96.2%。     

基于MODIS数据的安徽区域日蒸散量估算与分析

蒸散的估算在区域能量平衡和水资源研究中具有重要意义,遥感技术发展促进了区域蒸散的研究。利用安徽省气象资料、MODIS数据产品及GIS背景信息,基于SEBAL模型,按1 km空间分辨率进行了面尺度的安徽省日蒸散量估算,并在GIS空间分析模块的支持下对不同土地覆盖类型的日蒸散量进行统计分析。结果表明：遥感估算的蒸散量与利用Penman Monteith公式计算的蒸散量比较,两者之间具有较好的相关性,遥感蒸散估算值整体偏小,不同土地利用类型的日蒸散量间差异显著。遥感蒸散估算方法在安徽省具有一定的实用性,需优化模型参数,以提高其进一步技术推广的前景     

三峡工程运用对鄱阳湖水资源利用影响分析

三峡工程是我国有史以来建设的最大型的工程项目,具有防洪、发电、航运等方面巨大的经济和社会效益。然而,三峡工程的运用不可避免地会对原有江河湖泊水文情势产生一定影响。通过建立长江中下游（宜昌~大通）水沙模拟模型,定量分析了三峡工程运用对鄱阳湖水位的影响。三峡水库蓄水期（9月中下旬~11月）,三峡水库下泄流量比水库运用前减少3 000~6 000 m3/s,湖区各站水位最大降幅为07~19 m,平均降幅04~09 m。以此为基础,通过典型调查分析了三峡水库蓄水对鄱阳湖区农田灌溉用水和城镇供水的影响,提出了消除或降低影响的对策措施。研究结果可为鄱阳湖及长江中下游地区经济社会可持续发展和鄱阳湖综合治理提供科学依据和技术支撑     

城市道路暴雨径流水质特性及控制对策

由于暴雨径流冲刷引起的城市面源污染已成为受纳水体污染的主要来源。在综合国内外相关文献的基础上,分析了城市道路暴雨径流中污染物的赋存形态,总结了不同环境背景下城市道路暴雨径流污染物的浓度水平,阐述了城市道路暴雨径流水质的影响因素,论述了城市道路暴雨径流污染的控制对策,指出合理确定初期暴雨径流控制量、科学选取/设计控制技术、将暴雨径流控制措施与城市规划有机结合构建调控网络是城市道路暴雨径流污染控制的可行途径。     

西安市及周边地区MODIS气溶胶光学厚度与PM10浓度关系模型研究

西安是空气污染监控和防治有代表性的西部大型城市。研究了西安市及周边地区上空气溶胶光学厚度与PM10浓度的关系模型。利用2011—2012年MODIS卫星气溶胶光学厚度（AOD）遥感产品,通过数据匹配,利用地面气象观测站点的能见度数据和相对湿度数据对AOD产品进行垂直标高订正和湿度订正,2项订正显著提高了AOD和地面PM10浓度的相关性,相关系数从0．36提高到0．65,按季节分类统计和订正春至冬四季的相关系数分别为0．57、0．71、0．62和0．87,夏季和冬季的订正更为有效,可用性更高,这可能由于受到不同季节气溶胶来源和特征的影响。为研究中国西部大型城市,特别是西安市空气环境监测和区域联防联控提供了一种有效方法。     

Classification and comparison of municipal solid waste based on thermochemical characteristics

Municipal solid waste (MSW) has been normally sorted into six categories, namely, food residue, wood waste, paper, textiles, plastics, and rubber. In each category, materials could be classified further into subgroups. Based on proximate and ultimate analysis and heating value, statistical methods such as analysis of variance (ANOVA) and cluster analysis were applied to analyze the characteristics of MSW in every subgroup and to try to distinguish their relative properties. The chemical characteristics analysis of MSW showed that polyethylene (PE), polypropylene (PP), and polystyrene (PS) had the highest volatile matter content, with almost no ash and fixed carbon, while polyethylene terephthalate (PET) had high carbon content but low hydrogen content. Bones and vegetables had the highest ash content, while nutshells and rubber had the highest fixed carbon content. Paper and starch food had the highest oxygen content, and wool and bones had the highest nitrogen and sulfur content. Polyvinyl chloride (PVC) had the highest chlorine content at about 55%. PE, PP, and PS had the highest heating value, followed by chemical products such as rubber and chemical fiber. Conversely, paper, vegetables and bones had the lowest heating value. The results of cluster analysis of MSW components showed that fruit peel, weeds, wood, bamboo, leaves and nutshells could be classified as the lignocellulose category; starch food, cotton, toilet paper, printing paper and cardboard could be classified as the glucose monomer category; wood and chemical fiber could be classified as the high nitrogen and sulfur category; and PE, PP, and PS could be cluster as the polyolefin category.

Implications: The yield of municipal solid waste (MSW) is constantly increasing and waste to energy (WTE) has been used extensively all over the world. During the processes of incineration, pyrolysis, or gasification, the impact of physical and chemical properties of MSW is of great significance. However, the traditional classification of MSW is too general to provide more detailed information in many investigations. It is necessary to perform the investigation of characteristics of combustible MSW to distinguish different categories of MSW and find out their subclassification.     

Oxidation of polycyclic aromatic hydrocarbons by horseradish peroxidase in water containing an organic cosolvent

Polycyclic aromatic hydrocarbons (PAHs) are environmental contaminants that are toxic, mutagenic, and carcinogenic. We investigated the horseradish peroxidase (HRP)-catalyzed oxidation of PAHs in water containing N,N-dimethylformamide. Four PAHs (anthracene, phenanthrene, pyrene, and fluoranthene) were investigated using single-PAH and mixed-PAH systems. The results provide useful information regarding the preferential oxidation of anthracene over other PAHs regardless of the reaction time, enzyme dosage, and hydrogen peroxide concentration. The removal of PAHs was found to be very strongly correlated with the ionization potential (IP), and much greater PAH oxidation was observed at a lower IP. The oxidation of anthracene was specifically pH- and temperature-dependent, with the optimal pH and temperature being 8.0 and 40 °C, respectively. The redox mediators 1-hydroxybenzotriazole and veratryl alcohol promoted the transformation of anthracene by HRP; 9,10-anthraquinone was the main product detected from the anthracene oxidation system. The results of this study not only provide a better understanding of the oxidation of PAHs by utilizing a plant biocatalyst, but also provide a theoretical basis for establishing the HRP-catalyzed treatment of PAH-contaminated wastewater.     

MFC-MBR耦合系统运行效果及产电性能

为了解决膜生物反应器(MBR)运行成本高、膜污染的问题,本研究建立了一个微生物燃料电池(MFC)-MBR耦合系统,通过MFC回收污水中的能量,同时控制膜污染。研究结果表明,耦合系统对COD和NH3-N的去除率分别为(94.6±3.0)%和(90.9±6.9)%,出水水质稳定。由于MFC的耦合作用,使MBR的运行周期由18 d延长至36 d,膜污染得到了明显的减缓。耦合系统中MFC产电性能稳定,电流密度稳定在5.7 A/m3,最大功率密度达到了928.0 mW/m3,循环伏安法(CV)表明,阴极附着的微生物具有良好的电化学催化作用。MFC-MBR耦合系统将污水中的化学能转化为电能从而实现了膜污染的减缓及能量的回收,显示出巨大的发展前景。     

二氧化钛脱除高温烟气中的氯化氢

HCl是城市垃圾焚烧产生的主要气体污染物之一。将一种新型脱氯剂TiO2引入到垃圾焚烧系统中,并与其他脱氯剂的性能进行比较。研究了不同脱氯剂使用量、不同反应温度和不同HCl气体浓度对TiO2、CaO和CaTiO3脱氯效果的影响。结果显示,TiO2能在高温(800~1 000℃)、高HCl浓度(1 303.6~1 629.5 mg/m3)下获得较好的脱氯效果。与传统的脱氯剂CaO相比,TiO2更适合于高温烟气脱氯,其在1 000℃时的氯容(36.3 mg HCl/g TiO2)几乎是相同情况下的CaO氯容(9.3 mg HCl/g CaO)的4倍。而CaTiO3的脱氯效果不但受到自身分解效率的影响,还受到TiO2和CaO脱氯效果的影响,其脱氯效果较差。