生态足迹分析方法及其在国内的应用

生态足迹分析方法是90年代提出的可以定量的反映一个国家、地区、城市的可持续发展程度分析的计算模型。本文介绍了生态足迹模型的理论依据和计算方法，分析了生态足迹分析方法在我国的应用，并且指出了生态足迹分析方法的优缺点及其改进。     

紫外分光光度法在处理废水中的应用

根据二沉池出水特点，指出了以260nm紫外光(F260)评价处理二沉池出水的理论依据，然后确定了E260与COD的关系式为：E260=0．008COD 0．083。最后以E260为评价指标，比较了3种无饥混凝剂在不同pH值条件下对城市二沉池出水的COD去除效果，确定了最佳混凝剂为三氯化铁(FC)及混凝条件：pH4．5，投药量Fe^3 为32mg/L。     

磁悬浮列车事故仿真分析

总结磁悬浮列车可能发生的各种事故．蚰结为两大类：失去悬浮事故和与异物碰撞事故，针对这两类事故，用ADAMS进行仿真分析，得出事故形态及后果，为事故颅防并减小事故后果提供依据。     

人工湿地控制非点源污染的应用

随着点源污染的有效管理和控制，非点源污染已成为水环境污染的主要原因。人工湿地作为一种控制水环境非点源污染的有效工具，已被世界上很多国家所认可。本文首先简述了非点源污染的危害，其次对人工湿地的概念和类型进行了介绍，论述了人工湿地对非点源污染中氮、磷、重金属和农药等主要污染物的去除机理，最后对人工湿地处理系统的附属设施、水力因素、表土层以及植物收割等应用问题进行了探讨。     

垃圾填埋场渗滤液回流技术研究进展

垃圾填埋场渗滤液回流能有效降低渗滤液中污染物的浓度，提高填埋场稳定化程度，具有广泛的应用前景。本文综述了国内外学者对该技术的研究情况，包括技术特点及相关机理、渗滤液特性研究及回流效果的影响因素，指出了该技术现存的不足之处和尚待解决的理论和技术问题。     

Erratum to: Accumulation of Cr,Cd, Pb,Cu, and Zn by plants in tanning sludge storage sites: opportunities for contamination bioindication and phytoremediation

Environmental Science and Pollution Research -     

高压输电系统对通信局(站)危险影响中地电流系数的确定

高压输电系统发生接地短路故障时,会产生一个地电位升,对通信局(站)会危险影响,为了计算这个危险影响的大小,首先能够准确的计算出高压输电系统的地电流系数。本文论述了高压输电系统对通信局(站)危险影响中地电流系数的确定,介绍了地电流系数的定义,并分析了不同危险情况下地电流系数的计算。     

Research status,challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

Environmental Science and Pollution Research - In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve...     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.     

Chemical and process mineralogical characterizations of spent lithium-ion batteries: An approach by multi-analytical techniques

Mineral processing operation is a critical step in any recycling process to realize liberation, separation and concentration of the target parts. Developing effective recycling methods to recover all the valuable parts from spent lithium-ion batteries is in great necessity. The aim of this study is to carefully undertake chemical and process mineralogical characterizations of spent lithium-ion batteries by coupling several analytical techniques to provide basic information for the researches on effective mechanical crushing and separation methods in recycling process. The results show that the grade of Co, Cu and Al is fairly high in spent lithium ion batteries and up to 17.62 wt.%, 7.17 wt.% and 21.60 wt.%. Spent lithium-ion batteries have good selective crushing property, the crushed products could be divided into three parts, they are Al-enriched fraction (+2 mm), Cu and Al-enriched fraction (?2 + 0.25 mm) and Co and graphite-enriched fraction (?0.25 mm). The mineral phase and chemical state analysis reveal the electrode materials recovered from ?0.25 mm size fraction keep the original crystal forms and chemical states in lithium-ion batteries, but the surface of the powders has been coated by a certain kind of hydrocarbon. Based on these results a flowsheet to recycle spent LiBs is proposed.