Effects of increasing temperatures on biomarker responses and accumulation of hazardous substances in rope mussels (Mytilus galloprovincialis) from Bizerte lagoon

This study examined the influence of increasing temperatures in spring and summer on biochemical biomarkers in Mytilus galloprovincialis mussels sampled from Bizerte lagoon (northern Tunisia). Spatial and seasonal variations in a battery of seven biomarkers were analyzed in relation to environmental parameters (temperature, salinity, and pH), physiological status (condition and gonad indexes), stress on stress (SoS), and chemical contaminant levels (heavy metals, polycyclic aromatic hydrocarbons (PAHs), and PCBs) in digestive glands. Integrated biological response (IBR) was calculated using seven biomarkers (acetylcholinesterase (AChE), benzo[a]pyrene hydroxylase (BPH), multixenobiotic resistance (MXR), glutathione S-transferase (GST), catalase (CAT), malondialdehyde (MDA), and metallothioneins (MT). Seasonal variations in biological response were determined during a critical period between spring and summer at two sites, where chemical contamination varies by a factor of 2 for heavy metals and a factor 2.5 for PAHs. The analysis of a battery of biomarkers was combined with the measurement of physiological parameters at both sites, in order to quantify a maximum range of metabolic regulation with a temperature increase of 11 °C between May and August. According to our results, the MT, MDA, CAT, and AChE biomarkers showed the highest amplitude during the 11 °C rise, while the BPH, GST, and MXR biomarkers showed the lowest amplitude. Metabolic amplitude measured with the IBR at Menzel Abdelrahmen—the most severely contaminated station—revealed the highest metabolic stress in Bizerte lagoon in August, when temperatures were highest 29.1 °C. This high metabolic rate was quantified for each biomarker in the North African lagoon area and confirmed in August, when the highest IBR index values were obtained at the least contaminated site 2 (IBR = 9.6) and the most contaminated site 1 (IBR = 19.6). The combined effects of chemical contamination and increased salinity and temperatures in summer appear to induce a highest metabolic adaptation response and can therefore be used to determine thresholds of effectiveness and facilitate the interpretation of monitoring biomarkers. This approach, applied during substantial temperature increases at two sites with differing chemical contamination, is a first step toward determining an environmental assessment criteria (EAC) threshold in a North African lagoon.     

Controls on coarse wood decay in temperate tree species: birth of the LOGLIFE experiment

Dead wood provides a huge terrestrial carbon stock and a habitat to wide-ranging organisms during its decay. Our brief review highlights that, in order to understand environmental change impacts on these functions, we need to quantify the contributions of different interacting biotic and abiotic drivers to wood decomposition. LOGLIFE is a new long-term 'common-garden' experiment to disentangle the effects of species' wood traits and site-related environmental drivers on wood decomposition dynamics and its associated diversity of microbial and invertebrate communities. This experiment is firmly rooted in pioneering experiments under the directorship of Terry Callaghan at Abisko Research Station, Sweden. LOGLIFE features two contrasting forest sites in the Netherlands, each hosting a similar set of coarse logs and branches of 10 tree species. LOGLIFE welcomes other researchers to test further questions concerning coarse wood decay that will also help to optimise forest management in view of carbon sequestration and biodiversity conservation.     

Microsporidia parasites disrupt the responses to cadmium exposure in a gammarid

Microsporidia parasites are commonly found in amphipods, where they are often asymptomatic, vertically-transmitted and have several effects on host sexuality and behaviour. As amphipods are often used as models in ecotoxicological studies, we investigated the effect of microsporidian infections on energy reserves and defence capacities of Gammarus roeseli under cadmium stress. Only females were infected by two microsporidia parasites: Dictyocoela roeselum or Dictyocoela muelleri. In physiological conditions, microsporidia had no major effect on energy reserves and defence capacities of G.?roeseli, while under cadmium exposure, energy reserves and antioxidant defence were weaker in infected females. Moreover, higher malondialdehyde levels detected in infected females revealed that they suffered more cellular damages. Our results suggest that microsporidia may affect gammarid fitness in stressful conditions, when parasitic stress cannot be compensated by the host. Consequently, microsporidia parasites should be a factor necessary to take into account in ecotoxicology studies involving amphipods.     

Controls on Coarse Wood Decay in Temperate Tree Species: Birth of the LOGLIFE Experiment

Dead wood provides a huge terrestrial carbon stock and a habitat to wide-ranging organisms during its decay. Our brief review highlights that, in order to understand environmental change impacts on these functions, we need to quantify the contributions of different interacting biotic and abiotic drivers to wood decomposition. LOGLIFE is a new long-term ‘common-garden’ experiment to disentangle the effects of species’ wood traits and site-related environmental drivers on wood decomposition dynamics and its associated diversity of microbial and invertebrate communities. This experiment is firmly rooted in pioneering experiments under the directorship of Terry Callaghan at Abisko Research Station, Sweden. LOGLIFE features two contrasting forest sites in the Netherlands, each hosting a similar set of coarse logs and branches of 10 tree species. LOGLIFE welcomes other researchers to test further questions concerning coarse wood decay that will also help to optimise forest management in view of carbon sequestration and biodiversity conservation.     

Anammox: an option for ammonium removal in bioreactor landfills

Experiments carried out in bioreactor landfill simulators demonstrated that more than 40% of the total N was transferred into the liquid and gas phases during the incubation period of 380 days. Ammonium, an end product of protein degradation and important parameter to consider during landfill closure, tends to accumulate up to inhibitory levels in the leachate of landfills especially in landfills with leachate recirculation. Most efforts to remove ammonium from leachate have been focused on ex situ and partial in situ methods such as nitrification, denitrification and chemical precipitation. Besides minimal contributions from other N-removal processes, Anammox (Anaerobic Ammonium Oxidation) bacteria were found to be active within the simulators. Anammox is considered to be an important contributor to remove N from the solid matrix. However, it was unclear how the necessary nitrite for Anammox metabolism was produced. Moreover, little is known about the nature of residual nitrogen in the waste mass and possible mechanisms to remove it. Intrusion of small quantities of O₂ is not only beneficial for the degradation process of municipal solid waste (MSW) in bioreactor landfills but also significant for the development of the Anammox bacteria that contributed to the removal of ammonium. Volatilisation and Anammox activity were the main N removal mechanisms in these pilot-scale simulators. The results of these experiments bring new insights on the behaviour, evolution and fate of nitrogen from solid waste and present the first evidence of the existence of Anammox activity in bioreactor landfill simulators.     

Are wages more important for employees in poorer countries with harsher climates?

The purpose of the present research was to demonstrate that the perceived importance of wages is a function of thermal climate and national wealth. As hypothesized, analyses of 37 nationally representative samples of 22 483 blue‐ and white‐collar workers and 5544 managers show that wages are perceived as more important in poorer countries with colder climates (e.g., Azerbaijan) than in richer countries with colder climates (e.g., Canada) and in poorer and richer countries with temperate climates (e.g., Uganda, Singapore). The results suggest that performance‐related pay may be most effective in poorer countries with colder climates. Copyright © 2007 John Wiley & Sons, Ltd.     

Arsenate tolerance in Silene paradoxa does not rely on phytochelatin-dependent sequestration

Arsenate tolerance, As accumulation and As-induced phytochelatin accumulation were compared in populations of Silene paradoxa, one from a mine site enriched in As, Cu and Zn, the other from an uncontaminated site. The mine population was significantly more arsenate-tolerant. Arsenate uptake and root-to-shoot transport were slightly but significantly higher in the non-mine plants. The difference in uptake was quantitatively insufficient to explain the difference in tolerance between the populations. As accumulation in the roots was similar in both populations, but the mine plants accumulated much less phytochelatins than the non-mine plants. The mean phytochelatin chain length, however, was higher in the mine population, possibly due to a constitutively lower cellular glutathione level. It is argued that the mine plants must possess an arsenic detoxification mechanism other than arsenate reduction and subsequent phytochelatin-based sequestration. This alternative mechanism might explain at least some part of the superior tolerance in the mine plants.     

Sub-cooled and flashing liquid jets and droplet dispersion I. Overview and model implementation/validation

Many accidents involve two-phase releases of hazardous chemicals into the atmosphere. This paper describes the results of a third phase of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. The aim of the project is to increase the understanding of the behaviour of sub-cooled non-flashing and superheated flashing liquid jets, and to improve the prediction of initial droplet size, droplet dispersion and rainout.Phase III of the JIP first included scaled experiments for materials with a range of volatilities (water, cyclohexane, butane, propane and gasoline). These experiments were carried out by Cardiff University including measurements of flow rate and initial droplet size across the full relevant range of superheats. See the companion paper II for further details of these experiments and the derivation of new refined correlations for droplet size distribution and Sauter Mean Diameter. Furthermore large-scale butane experiments were carried out by INERIS (France) to ensure that for more realistic scenarios the derived droplet size correlations are accurate.Model validation and model improvements were carried out by DNV Software, including validation of release rate and initial droplet size against the above scaled and large-scale experiments. New correlations for droplet size distribution and Sauter Mean Diameter (SMD) were implemented into the Phast discharge model. These were compared against a range of other droplet size and rainout correlations published in the literature, in conjunction with validation against an extensive set of experiments. It was shown that the new droplet size correlation agrees better against experimental data than the existing Phast correlation. To further improve the rainout prediction, the Phast dispersion model (UDM) was also extended to allow simultaneous modelling of a range of droplet sizes and distributed rainout (rather than rainout at one point).     

Sub-cooled and flashing liquid jets and droplet dispersion II. Scaled experiments and derivation of droplet size correlations

This paper describes the results of the first stage of Phase III of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. This stage included scaled experiments for water, gasoline, and cyclohexane for a range of superheats and nozzles with different aspect ratios. Additional experiments for butane and propane were conducted as a validation exercise and are discussed in the companion paper. Moreover this paper provides recommendations for atomisation correlations in the regimes of mechanical break-up, transition to flashing, and fully flashing. The objectives of this scaled experimental programme are to : (i) provide confidence in the previously proposed modelling methodology (Phase II) across a broad range of initial conditions (ii) update the models’ correlations to generalise further its applicability (iii) recommend further model improvements. Development of new correlations for Sauter Mean Droplet diameter (SMD) and droplet size distribution is based on a best fit of the current scaled experimental data. The new data endorses the previous tri-functional Phase II approach including regimes for mechanical break-up, transition to flashing, and fully flashing, which is hence updated in the new Phase III SMD model. Considerable effort is devoted to capturing the full droplet size range under low-superheat conditions. Also, new enhancements in PDA technology were adopted to enable better quality data under high-superheat conditions. The priority recommendation for further model improvement is better characterisation of the poor quality releases under low-superheat conditions, where this work indicates that extremely broad droplet size distributions are likely. A companion paper (Part I) presents a more general overview of the dispersion problem, implementation of the correlations and subsequent performance against both the current scaled experiments and additional large-scale butane experiments.