Metal equilibration in laboratory-contaminated (spiked) sediments used for the development of whole-sediment toxicity tests

The equilibration and bioavailability of metals in laboratory-contaminated sediments have been investigated in order to provide better guidance on acceptable procedures for spiking sediments with metals for use in the development of whole-sediment toxicity tests. The equilibration rates of Cd, Cu, Ni and Zn spiked into three estuarine surface sediments with varying properties were investigated. Changes to sediment pH, redox potential, porewater and acid-soluble metals, acid-volatile sulfide and bacterial activity during equilibration, effects of temperature and disturbances following equilibration are reported. The addition of metals to sediments caused major decreases in pH and increases in redox potential as metals displaced iron(II) into the porewaters and added metals and iron (following oxidation) were hydrolyzed. The rates of equilibration of metals in porewaters varied considerably and were dependent on sediment and metal properties. For the oxic/sub-oxic sediments studied, metal-spikes of Cd, Cu, Ni and Zn appeared near equilibrium after 25-45, 10-15, 30-70 and 20-40 days, respectively. Acid-soluble metal concentrations decreased during the equilibration period indicating that the metals become more strongly associated with the sediments with time (less bioavailable). Bacterial activity was greatest in the sediment equilibrated at pH 7 and decreased following the addition of metals. During the equilibration period, bacterial activity increased in sediments equilibrated at pH 6, remained low in sediments at pH 8 and varied erratically in sediments at pH 7. Spiked sediments were shown to equilibrate more slowly at lower temperatures resulting in high porewater metal concentrations. Disturbances to equilibrated sediments because of sample manipulation caused significant iron(II) oxidation and losses of metals from porewaters. The importance of documenting spiking and equilibration procedures and carefully measuring and reporting sediment parameters is highlighted so that contaminant bioavailability and exposure pathways can be interpreted and organism sensitivity accurately determined. Recommendations are given for the preparation of metal-spiked sediments for toxicity testing purposes.     

Storm impacts along European coastlines. Part 2: lessons learned from the MICORE project

This paper describes the MICORE approach to quantify for nine field sites the crucial storm related physical hazards (hydrodynamic as well as morphodynamic) in support of early warning efforts and emergency response.As a first step historical storms that had a significant morphological impact on a representative number of sensitive European coastal stretches were reviewed and analysed in order to understand storm related morphological changes and how often they occur around Europe. Next, an on-line storm prediction system was set up to enable prediction of storm related hydro- and morphodynamic impacts. The system makes use of existing off-the-shelf models as well as a new open-source morphological model. To validate the models at least one year of fieldwork was done at nine pilot sites. The data was safeguarded and stored for future use in an open database that conforms to the OpenEarth protocols.To translate quantitative model results to useful information for Civil Protection agencies the Frame of Reference approach ( [Van Koningsveld et al., 2005] and [Van Koningsveld et al., 2007] ) was used to derive Storm Impact Indicators (SIIs) for relevant decision makers. The acquired knowledge is expected to be directly transferred to the civil society trough partnerships with end-users at the end of the MICORE project.     

Metal microchannel lamination using surface mount adhesives for low-temperature heat exchangers

This paper reports the feasibility of using surface mount adhesives to produce low temperature microchannel arrays in a wide variety of metals. Sheet metal embossing and chemical etching processes have been used to produce sealing bosses that eliminate channel laminae, resulting in approximately 50% material savings over traditional methods. An assembly process using adhesive dispense and cure is outlined to produce leak-free devices. Optimal fill ratios were determined to be between 1.1 and 1.25. Bond strength investigation reveals robustness to surface conditions and a bond strength of 5.5–8.5 MPa using a 3X safety factor. Dimensional characterization reveals a two sigma (95%) post-bonded channel height tolerance under 10% after bonding. Patterning tolerance and surface roughness of the laminae faying surfaces were found to have a significant influence on the final post-bonded channel height. Leakage and burst pressure testing on several samples has established confidence that adhesive bonding can produce leak-free joints. Operating pressures up to 413 kPa have been satisfied, equating to tensile pressure on bond joints of 1.9 MPa. Higher operating pressures can be accommodated by increasing the bond area of devices.     

哑铃湾网箱养殖水体中N、P的形态特征及其季节变化调控机制

2002年4月～2003年1月四个季度,对哑铃湾典型网箱养殖区N、P几种形态含量进行了实地调查和分析。结果表明,在该养殖区,N、P的存在形态都以溶解态为主,各种形态的季节变化都受网箱养殖活动和浮游植物的生长状况综合调控;在该海域,从N/P值的角度来看,P是比较缺乏的,但是从浮游植物可利用的角度来看,无机磷却相对过剩。     

Source apportionment of indoor, outdoor, and personal PM2.5 in Seattle, Washington, using positive matrix factorization

As part of a large exposure assessment and health-effects panel study, 33 trace elements and light-absorbing carbon were measured on 24-hr fixed-site filter samples for particulate matter with an aerodynamic diameter <2.5 microm (PM2.5) collected between September 26, 2000, and May 25, 2001, at a central outdoor site, immediately outside each subject's residence, inside each residence, and on each subject (personal sample). Both two-way (PMF2) and three-way (PMF3) positive matrix factorization were used to deduce the sources contributing to PM2.5. Five sources contributing to the indoor and outdoor samples were identified: vegetative burning, mobile emissions, secondary sulfate, a source rich in chlorine, and a source of crustal-derived material. Vegetative burning contributed more PM2.5 mass on average than any other source in all microenvironments, with average values estimated by PMF2 and PMF3, respectively, of 7.6 and 8.7 microg/m3 for the outdoor samples, 4 and 5.3 microg/m3 for the indoor samples, and 3.8 and 3.4 microg/m3 for the personal samples. Personal exposure to the combustion-related particles was correlated with outdoor sources, whereas exposure to the crustal and chlorine-rich particles was not. Personal exposures to crustal sources were strongly associated with personal activities, especially time spent at school among the child subjects.     

Analysis of work related accidents in the Spanish mining sector from 1982-2006

Introduction

The rate for work related accidents in the Spanish mining sector is notably higher than in other countries such as the United States. It produces a very negative impact on the mining industry. This paper is the report of a study on serious and fatal accidents in Spanish mining from 1982-2006. It is based on the reports of 212 accidents (serious or fatal) carried out by the General Management of Energy and Mining of Catalonia (Spain). Method: The high work-related accident rate in the Spanish mining sector makes it necessary to carry out an analysis and research that can shed light on the causes of this high rate; this is the only way that a solution can be found. The study is based on Feyer and Williamson's analysis of accident causes, as they apply to 212 accidents. The types and causes of the accidents are coded according to the coding system used by the Spanish National Institute for Safety and Hygiene in the Workplace, which allows us to identify a series of direct causes and contributing factors in different accidents. Results If all the causes and factors that are present in the accidents are known, we are able to look for appropriate solutions to reduce them as much as possible. In short, we are able to come up with a series of conclusions that expose the weak links in the management of accident prevention in companies. This is helpful in the struggle to reduce work injuries in the Spanish mining sector.     

The effects of minimum legal drinking age 21 laws on alcohol-related driving in the United States

Objective

To examine trends in alcohol consumption and alcohol-related crashes among people younger than 21 in the United States and to review evidence on the effects of minimum legal drinking age (MLDA) laws.

Methods

Trends in alcohol-related crashes and alcohol consumption among young people were examined, and studies on the effects of lowering and raising the drinking age were reviewed.

Results

MLDA laws underwent many changes during the 20th century in the United States. Since July 1988, the MLDA has been 21 in all 50 states and the District of Columbia. Surveys tracking alcohol consumption among high school students and young adults found that drinking declined since the late 1970 s, and most of the decline occurred by the early 1990 s. These were the years when states were establishing, or reinstating, a MLDA-21. Among fatally injured drivers ages 16-20, the percentage with positive BACs declined from 61% in 1982 to 31% in 1995, a bigger decline than for older age groups; declines occurred among the ages directly affected by raising MLDAs (ages 18-20) and among young teenagers not directly affected (ages 16-17). Almost all studies designed specifically to gauge the effects of drinking age changes show MLDAs of 21 reduce drinking, problematic drinking, drinking and driving, and alcohol-related crashes among young people. Yet many underage people still drink, many drink and drive, and alcohol remains an important risk factor in serious crashes of young drivers, especially as they progress through the teenage years. Stepped-up enforcement of MLDA and drinking and driving laws can reduce underage drinking. Recent efforts to lower MLDAs to 18 and issue licenses to drink upon completion of alcohol education have gained local and national media attention. There is no evidence that alcohol education can even partially replace the effect of MLDA-21.

Conclusions

The cause and effect relationship between MLDAs of 21 and reductions in highway crashes is clear. Initiatives to lower the drinking age to 18 ignore the demonstrated public health benefits of MLDAs of 21.

Impact on Industry

Lowering the drinking age to 18 will increase highway crash deaths among young people.     

The impact of a standard enforcement safety belt law on fatalities and hospital charges in Ohio

Introduction

The purpose of this study was to analyze linked crash and hospital data to determine the effect that enactment of a standard enforcement safety belt law in Ohio would have on hospital charges and direct medical costs due to motor-vehicle crashes, focusing on the impact to the state's Medicaid system.

Method

The linkage and analysis was conducted as part of the Ohio Crash Outcome Data Evaluation System (CODES) program. Current safety belt usage in Ohio stands at 82% with its secondary enforcement safety belt law.

Results

Assuming an increase in usage to 92% through standard enforcement, over $15.3 million in medical costs to Medicaid for injuries that occur in a single year could be prevented over a 10-year period. Cumulative savings could reach more than $91.2 million during the 10-year period. In addition, 161 fatalities could have been prevented in one year had all unbelted occupants who sustained a fatal injury instead chosen to wear their safety belt.

Summary and Impact on Industry

Clearly, substantial progress can be made in reducing the number of deaths and injuries, as well as medical costs associated with motor-vehicle crashes, by strengthening safety belt laws and increasing safety belt usage in Ohio.