Ecological planning for land use and ruraldevelopment of Taojiang County

ＥｃｏｌｏｇｉｃａｌｐｌａｎｎｉｎｇｆｏｒｌａｎｄｕｓｅａｎｄｒｕｒａｌｄｅｖｅｌｏｐｍｅｎｔｏｆＴａｏｊｉａｎｇＣｏｕｎｔｙＯｕｙａｎｇＺｈｉｙｕｎ；ＷａｎｇＲｕｓｏｎｇ；ＪａｓｏｎＷｅｉｓｍａｎ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－Ｅｎｖｉ...     

Optimizing carbon sequestration in commercial forests by integrating carbon management objectives in wood supply modeling

This paper provides a methodology for generating forest management plans, which explicitly maximize carbon (C) sequestration at the forest-landscape level. This paper takes advantage of concepts first presented in a paper by Meng et al. (2003; Mitigation Adaptation Strategies Global Change 8:371–403) by integrating C-sequestration objective functions in existing wood supply models. Carbon-stock calculations performed in Woodstock^TM (RemSoft Inc.) are based on C yields generated from volume table data obtained from local Forest Development Survey plots and a series of wood volume-to-C content conversion factors specified in von Mirbach (2000). The approach is used to investigate the impact of three demonstration forest-management scenarios on the C budget in a 110,000 ha forest in south-central New Brunswick, Canada. Explicit demonstration scenarios addressed include (1) maximizing timber extraction either by clearcut or selection harvesting for greatest revenue generation, (2) maximizing total C storage in the forest landscape and in wood products generated from harvesting, and (3) maximizing C storage together with revenue generation. The level of clearcut harvesting was greatest for scenario 1 (≥15 × 10⁴ m³ of wood and ≥943 ha of land per harvesting period), and least for scenario 2 (=0 m³ per harvesting period) where selection harvesting dominated. Because softwood saw logs were worth more than pulpwood ($60 m⁻³ vs. $40 m⁻³) and were strategic to the long-term storage of C, the production of softwood saw logs exceeded the production of pulpwood in all scenarios. Selection harvesting was generally the preferred harvesting method across scenarios. Only in scenario 1 did levels of clearcut harvesting occasionally exceed those of selection harvesting, mainly in the removal of old, dilapidated stands early in the simulation (i.e., during periods 1 through 3). Scenario 2 provided the greatest total C-storage increase over 80 years (i.e., 14 × 10⁶ Mg C, or roughly 264 Mg ha⁻¹) at a cost of $111 per Mg C due to lost revenues. Scenarios 3 and 1 produced reduced storage rates of roughly 9 × 10⁶ Mg C and 3 × 10⁶ Mg C, respectively; about 64% and 22% of the total, 80-year C storage calculated in scenario 2. The bulk of the C in scenario 2 was stored in the forest, amounting to about 76% of the total C sequestered.     

Impact of Gold mining on the Environment and Human Health: A Case Study in the Migori Gold Belt, Kenya

The study of gold sites in the Migori Gold Belt, Kenya, revealed that the concentrations of heavy metals, mainly Hg, Pb and As are above acceptable levels. Tailings at the panning sites recorded values of 6.5–510 mg kg^–1 Pb, 0.06–76.0 mg kg^–1 As and 0.46–1920 mg kg^–1 Hg. Stream sediments had values of 3.0–11075 mg kg^–1 Pb, 0.014–1.87 mg kg^–1 As and 0.28–348 mg kg^–1 Hg. The highest metal contamination was recorded in sediments from the Macalder stream (11075 mg kg^–1 Pb), Nairobi mine tailings (76.0 mg kg^–1 As) and Mickey tailings (1920 mg kg^–1 Hg). Mercury has a long residence time in the environment and this makes its emissions from artisan mining a threat to health. Inhaling large amounts of siliceous dust, careless handling of mercury during gold panning and Au/Hg amalgam processing, existence of water logged pits and trenches; and large number of miners sharing poor quality air in the mines are the major causes of health hazards among miners. The amount of mercury used by miners for gold amalgamation during peak mining periods varies from 150 to 200 kg per month. Out of this, about 40% are lost during panning and 60% lost during heating Au/Hg amalgam. The use of pressure burners to weaken the reef is a deadly mining procedure as hot particles of Pb, As and other sulphide minerals burn the body. Burns become septic. This, apparently, leads to death within 2–3 years. On-site training of miners on safe mining practices met with enthusiasm and acceptance. The use of dust masks, air filters and heavy chemical gloves during mining and mineral processing were readily accepted. Miners were thus advised to purchase such protective gear, and to continue using them for the sake of their health. The miners' workshop, which was held at the end of the project is likely to bear fruit. The Migori District Commissioner and other Government officials, including medical officers attended this workshop. As a result of this, the Government is seriously considering setting up a clinic at Masara, which is one of the mining centres in the district. This would improve the health of the mining community.     

Chinook salmon use of spawning patches: relative roles of habitat quality, size, and connectivity.

Declines in many native fish populations have led to reassessments of management goals and shifted priorities from consumptive uses to species preservation. As management has shifted, relevant environmental characteristics have evolved from traditional metrics that described local habitat quality to characterizations of habitat size and connectivity. Despite the implications this shift has for how habitats may be prioritized for conservation, it has been rare to assess the relative importance of these habitat components. We used an information-theoretic approach to select the best models from sets of logistic regressions that linked habitat quality, size, and connectivity to the occurrence of chinook salmon (Oncorhynchus tshawytscha) nests. Spawning distributions were censused annually from 1995 to 2004, and data were complemented with field measurements that described habitat quality in 43 suitable spawning patches across a stream network that drained 1150 km2 in central Idaho. Results indicated that the most plausible models were dominated by measures of habitat size and connectivity, whereas habitat quality was of minor importance. Connectivity was the strongest predictor of nest occurrence, but connectivity interacted with habitat size, which became relatively more important when populations were reduced. Comparison of observed nest distributions to null model predictions confirmed that the habitat size association was driven by a biological mechanism when populations were small, but this association may have been an area-related sampling artifact at higher abundances. The implications for habitat management are that the size and connectivity of existing habitat networks should be maintained whenever possible. In situations where habitat restoration is occurring, expansion of existing areas or creation of new habitats in key areas that increase connectivity may be beneficial. Information about habitat size and connectivity also could be used to strategically prioritize areas for improvement of local habitat quality, with areas not meeting minimum thresholds being deemed inappropriate for pursuit of restoration activities.     

Temporal variability in winter travel patterns of Yellowstone bison: the effects of road grooming.

The influence of winter recreation on wildlife in Yellowstone National Park (YNP), Wyoming and Montana, USA, is a controversial issue. In particular, the effects of road grooming, done to facilitate snowmobile and snowcoach travel, on bison (Bison bison) ecology are under debate. We collected data during winters, from 1997 to 2005, on bison road use, off-road travel, and activity budgets to quantify temporal trends in the amount of bison road and off-road travel and to identify the ecological factors affecting bison movements and use of the groomed road system in the Madison-Gibbon-Firehole (MGF) area of YNP. Using model comparison techniques, we found bison travel patterns to be influenced by multiple, interacting effects. Road travel was negatively correlated with road grooming, and we found no evidence that bison preferentially used groomed roads during winter. Snow water equivalent, bison density, and the springtime melt period were positively correlated with both bison road and off-road travel. From behavioral scans on 68,791 bison, we found that travel is only a small percentage (11%) of all bison activity, with foraging comprising 67% of observations. Also, only 7% of traveling bison and 30% of foraging bison were displacing snow, and we suggest foraging, rather than traveling, is likely the major energetic cost to bison in winter. Bison utilize their own trail network, connecting foraging areas using stream corridors, geothermal pathways, and self-groomed travel routes. Our results indicate that temporal patterns in bison road travel are a manifestation of general travel behavior and that groomed roads in the MGF do not appear to be a major factor influencing bison ecology and spatial redistribution. We suggest that the changes in bison spatial dynamics during the past three decades have likely been the result of the natural phenomenon of density-dependent range expansion, rather than having been caused by the anthropogenic influence of road grooming.     

Accumulation of trinitrotoluene (TNT) in aquatic organisms: part 1--Bioconcentration and distribution in channel catfish (Ictalurus punctatus)

Little is currently known regarding the toxicokinetics of TNT in fish. In the present study, the bioconcentration and distribution of trinitrotoluene (TNT) and TNT biotransformation products was investigated in juvenile channel catfish by exposing catfish to 14C-labeled TNT in water. Uptake experiments showed relatively fast rates (k(u)=10.1 ml g(-1) h(-1)) for TNT from the water; however, bioconcentration factors for TNT were low (0.79 ml g(-1)) due to rapid biotransformation and potential elimination of TNT. Accumulation of extractable radioactivity (TNT and all extractable biotransformation products) was much greater (BCF=10.5 ml g(-1)) than that for parent compound. TNT (parent compound) bioconcentrated to the greatest extent in the gills of the fish, while total radioactivity bioconcentrated to the greatest extent in the viscera. Residual portions of the fish that contained muscle and skin had lower concentrations of TNT than the whole fish, indicating that ingestion of fish fillets would result in decreased exposure to human consumers. Although the bioconcentration potential of TNT is very low, future research needs to be conducted to identify the biotransformation products that make up most of the radioactivity in exposed fish and evaluate their potential to promote toxicity.     

Cadmium uptake and translocation in tumbleweed (Salsola kali), a potential Cd-hyperaccumulator desert plant species: ICP/OES and XAS studies

Cadmium is a heavy metal, which, even at low concentrations, can be highly toxic to the growth and development of both plants and animals. Plant species vary extensively in their tolerance to excess cadmium in a growth medium and very few cadmium-tolerant species have been identified. In this study, tumbleweed plants (Salsola kali) grown in an agar-based medium with 20 mgl(-1) of Cd(II) did not show phytotoxicity, and their roots had the most biomass (4.5 mg) (P < 0.05) compared to the control plants (2.7 mg) as well as other treated plants. These plants accumulated 2696, 2075, and 2016 mg Cd kg(-1) of dry roots, stems, and leaves, respectively. The results suggest that there is no restricted cadmium movement in tumbleweed plants. In addition, the amount of Cd found in the dry leaf tissue suggests that tumbleweed could be considered as potential cadmium hyperaccumulating species. X-ray absorption spectroscopy studies demonstrated that in roots, cadmium was bound to oxygen while in stems and leaves, the metal was attached to oxygen and sulfur groups. This might imply that some small organic acids are responsible for Cd transport from roots to stems and leaves. In addition, it might be possible that the plant synthesizes phytochelatins in the stems, later coordinating the absorbed cadmium for transport and storage in cell structures. Thus, it is possible that in the leaves, Cd either exists as a Cd-phytochelatin complex or bound to cell wall structures. Current studies are being performed in order to elucidate the proposed hypothesis.     

Differential bioavailability of field-weathered p,p'-DDE to plants of the Cucurbita and Cucumis genera

Field experiments were conducted to assess the bioavailability of weathered p,p'-DDE in soil to plants in the Cucurbita (squash, pumpkin) and Cucumis (cucumber, melon) genera. As expected, significant variability exists in the uptake of p,p'-DDE between plants of different genera. Root:soil concentration factors, defined as the ratio of p,p'-DDE (ng/g, dry weight) in the roots to that in the soil, approach 1.8 for cucumbers/melons and 16 for squash/pumpkin. However, significant differences were also observed among varieties of squash and pumpkin, with greater than an order of magnitude variation in the root:soil concentration factors and up to two orders of magnitude difference in the absolute amount of contaminant present within the plant. Although root systems routinely contain the highest concentration of p,p'-DDE (ng/g), this compartment comprises less than 2% of the total plant biomass. In all varieties but one, more than 86% of the extracted pollutant was in the shoot system. For two of varieties of Cucurbita pepo, concentrations of p,p'-DDE in the stems reached 1.1-2.2 mg/g and estimations of percent contaminant extraction from the soil ranged from 0.40% to 2.4%. These values approach those observed in the phytoremediation of heavy metals by "hyperaccumulating" species and indicate the potential for a plant-based remediation approach to soils contaminated with persistent organic pollutants.     

Coupling permanganate oxidation with microbial dechlorination of tetrachloroethene.

For sites contaminated with chloroethene non-aqueous-phase liquids, designing a remediation system that couples in situ chemical oxidation (ISCO) with potassium permanganate (KMnO4) and microbial dechlorination may be complicated because of the potentially adverse effects of ISCO on anaerobic bioremediation processes. Therefore, one-dimensional column studies were conducted to understand the effect of permanganate oxidation on tetrachloroethene (PCE) dechlorination by the anaerobic mixed culture KB-1. Following the confirmation of PCE dechlorination, KMnO4 was applied to all columns at a range of concentrations and application velocities to simulate varied distances from oxidant injection. Immediately following oxidation, reductive dechlorination was inhibited; however, after passing several pore volumes of sterile growth medium through the columns after oxidation, a rebound of PCE dechlorination activity was observed in every inoculated column without the need to reinoculate. The volume of medium required for a rebound of dechlorination activity differed from 1.1 to 8.1 pore volumes (at a groundwater velocity of 4 cm/d), depending on the specific condition of oxidant application.     

Estimating fugitive dust emission rates using an environmental boundary layer wind tunnel

Emissions from fugitive dust due to erosion of “natural” wind-blown surfaces are an increasingly important part of PM₁₀ (particulate matter with sizes of 10 μm aerodynamic diameter) emission inventories. These inventories are particularly important to State Implementation Plans (SIP), the plan required for each state to file with the Federal government indicating how they will comply with the Federal Clean Air Act (FCAA). However, techniques for determining the fugitive dust contribution to over all PM₁₀ emissions are still in their developmental stages. In the past, the methods have included field monitoring stations, specialized field studies and field wind-tunnel studies. The measurements made in this paper allow for systematic determination of PM₁₀ emission rates through the use of an environmental boundary layer wind tunnel in the laboratory. Near surface steady-state concentration profiles and velocity profiles are obtained in order to use a control volume approach to estimate emission rates. This methodology is applied to soils retrieved from the nation's single largest PM₁₀ source, Owens (dry) Lake in California, to estimate emission rates during active storm periods. The estimated emission rates are comparable to those obtained from field studies and lend to the validity of this method for determining fugitive dust emission rates.