Utilization of agricultural waste corn cob for the preparation of carbon adsorbent

In the present study, a series of activated carbons were prepared from agricultural waste corn cob by chemical and physical activations with potassium hydroxide (KOH)/potassium carbonate (K2CO3) and carbon dioxide (CO2). The effect of process variables such as impregnation ratio, impregnation time, activation temperature and soaking time of CO2 was studied in order to relate these preparation parameters with the physical properties of final carbon products. The resulting activated carbons were characterized by nitrogen adsorption-desorption isotherms at 77 K. The surface areas and pore volumes of carbons were estimated by the BET equation, the Langmuir equation and the t-plot method. Under the experimental conditions investigated, the main parameters in the activation of corn cob were found to be the impregnation ratio and activation temperature. The soaking time of CO2 is another important variable, which had a strong effect on the pore volume development. The BET surface area and total pore volume were as large as about 2000 m2/g and about 1.0 cm3/g, respectively. This study showed that the activation of agricultural waste corn cob with KOH/K2CO3 and CO2 was suitable for the preparation of large-surface-area activated carbons.     

Growth dynamics of major microbial populations during biodegradation of o-phthalate in anaerobic sediment slurries under a CO2/H2 atmosphere

o-Phthalate transformers increased about five orders of magnitude (to 1.6x10(11)cells g-1 sediment) just before the onset of fast biotransformation of o-phthalate (21.6 mg l-1) and then decreased sharply when the concentration of o-phthalate became low during biodegradation of o-phthalate in anaerobic sediment slurries under CO2/H2 (4:1, v/v). In contrast, the benzoate transformers increased about four orders of magnitude (to 1.6x10(11)cells g-1 sediment) in 48 days and then increased one more order (to 1.6x10(12)cells g-1 sediment) in 60 days and then remained at that high level in those sediment slurries. When making a comparison between the growth dynamics of o-phthalate transformers, acetogens, sulfate reducers, and methanogens and the time course of o-phthalate transformation, it appears that acetogens did not initiate biotransformation of o-phthalate, and that sulfate reducers and methanogens were not directly involved in o-phthalte degradation. o-Phthalate was not transformed in sediment slurries amended with BESA plus molybdate under CO2/H2.     

Host effect on size structure and timing of sex change in the coral-inhabiting snail<Emphasis Type="Italic"> Coralliophila violacea</Emphasis>

The distribution, size and reproductive characteristics of the snail Coralliophila violacea (Lamarck), which inhabits the surface of both the branching coral Porites nigrescens and the massive corals P. lobata and P. lutea, were surveyed to examine the host effect on: (1) population structure and (2) reproductive characteristics, including the size at sex change of symbionts. On branching hosts, most snails were solitary, whereas on massive hosts, most had formed multiple-snail patches. Significantly smaller snails as well as proportionally more females were found on branching than on massive hosts. Furthermore, the fecundity of the females on the branching hosts was significantly lower than that on the massive hosts. The size at sex change (male to female) of the snails was smaller on the branching hosts than on massive hosts. Patch composition differences can partly explain the smaller size at sex change for snails on branching hosts; however, there was also evidence that host morphology had a significant effect on the timing of sex change.Communicated by T. Ikeda, Hakodate     

Mass-size distributions of particulate sulfate, nitrate, and ammonium in a particulate matter nonattainment region in southern Taiwan

Concentrations and distributions of three major water-soluble ion species (sulfate, nitrate, and ammonium) contained in ambient particles were measured at three sampling sites in the Kao-ping ambient air quality basin, Taiwan. Ambient particulate matter (PM) samples were collected in a Micro-orifice Uniform Deposit Impactor from February to July 2003 and were analyzed for water-soluble ion species with an ion chromatograph. The PM1/ PM2.5 and PM1/PM10 concentration ratios at the emission source site were 0.73 and 0.53 and were higher than those (0.68 and 0.48) at the background site because there are more combustion sources (i.e., industrial boilers and traffic) around the emission source site. Mass-size distributions of PM NO3- were found in both the fine and coarse modes. SO4(2-)and NH4+ were found in the fine particle mode (PM2.5), with significant fractions of submicron particles (PM1). The source site had higher PM1/PM10(79, 42, and 90%) and PM1/PM2.5 concentration ratios (90, 58, and 93%) for the three major inorganic secondary aerosol components (SO4(2-), NO3-, and NH4+) than the receptor site (65, 27, and 65% for PM1/PM10, 69, 51, and 70% for PM1/PM2.5. Results obtained in this study indicate that the PM1 (submicron aerosol particles) fraction plays an important role in the ambient atmosphere at both emission source and receptor sites. Further studies regarding the origin and formation of ambient secondary aerosols are planned.     

Co-firing of paper mill sludge and coal in an industrial circulating fluidized bed boiler

Co-firing of coal and paper mill sludge was conducted in a 103 MWth circulating fluidized bed boiler to investigate the effect of the sludge feeding rate on emissions of SOx, NOx, and CO. The preliminary results show that emissions of SOx and Nx decrease with increasing sludge feeding rate, but CO shows the reverse tendency due to the decrease in combustion temperature caused by a large amount of moisture in the sludge. All emissions met the local environmental requirements. The combustion ashes could be recycled as feed materials in the cement manufacturing process.     

Estimation and projection of nitrous oxide (N2O) emissions from anthropogenic sources in Taiwan

Taiwan is a densely populated and developed country with more than 97% of energy consumption supplied by imported fuels. Greenhouse gas emissions are thus becoming significant environmental issues in the country. Using the Intergovernmental Panel on Climate Change (IPCC) recommended methodologies, anthropogenic emissions of nitrous oxide (N2O) in Taiwan during 2000-2003 were estimated to be around 41 thousand metric tons annually. About 87% of N2O emissions come from agriculture, 7% from the energy sector, 3% from industrial processes sector, 3% from waste sector. On the basis of N2O emissions in 2000, projections for the year 2010 show that emissions were estimated to decline by about 6% mainly due to agricultural changes in response to the entry of WTO in 2002. In contrast to projections for the year 2020, N2O emissions were projected to grow by about 17%. This is based on the reasonable scenario that a new adipic acid/nitric acid plant will be probably started after 2010.     

Genetic polymorphisms in CYP1A1 and GSTM1 predispose humans to PCBs/PCDFs-induced skin lesions

INTRODUCTION: Polychlorinated biphenyls (PCBs) and dibenzofurans (PCDFs) are ubiquitous persistent pollutants in humans. Whether people with different genotypes are with different susceptibility to these chemicals are unknown. In a group of people highly exposed to PCBs/PCDFs, we tested the hypothesis that genotypic polymorphisms affected susceptibility for development of skin manifestations. METHODS: In 1979, approximately 2000 people in central Taiwan ingested cooking oil contaminated with PCBs/PCDFs. Skin disorder such as chloracne, abnormal nail, hyperkeratosis and skin allergy were found in PCBs/PCDFs exposed group. We recruited exposed and community background exposure subjects for blood testing and telephone-interview. Single nucleotide polymorphisms, AhR Arg554Lys, CYP1A1 Ile462Val, CYP1A1 T6235C, and GSTM1/T1 deletion, were determined. Occurrence of skin manifestations was compared among people with different genotypes while stratified by PCB exposure levels by logistic regression. RESULTS: Data on exposure, medical history, and genotypes were obtained from 393 exposed and 181 background exposure groups. Skin manifestations including chloracne, allergy, abnormal nail, and hyperkeratosis were more prevalent in exposed people in a dose-related manner. Among highly exposed individuals, combined CYP1A1-MspI mutant genotype and GSTM1-null genotype were associated with increased risk of chloracne (odds ratio 2.8, 95% confidence interval 1.1-7.6). Among intermediately exposed individuals, GSTM1 null genotype was associated with skin allergy. AhR Arg554Lys genotype and GSTT1 null genotype were not related to susceptibility to skin manifestations in PCB/PCDF-exposed population. CONCLUSION: CYP1A1 and GSTM1 genotypic polymorphisms might be related to the susceptibility to PCB/PCDF-induced skin manifestations.     

Direct field observation of the relative humidity effect on the beta-gauge readings

The effect of ambient relative humidity (RH) on hourly particulate matter (PM10) readings of beta-gauge monitors has been studied using two collocated monitors in the field. The inlet air of monitor 1 was conditioned with water vapor to increase its RH, whereas monitor 2 operated normally in ambient conditions. Experimental data showed that PM10 readings of monitor 1 were nearly the same as monitor 2, as long as the RH of its conditioned incoming air did not exceed approximately 80-85%. However, when the RH exceeded approximately 80-85%, PM10 readings of monitor 1 became higher than monitor 2, and the difference increased with increasing RH. The measurement of pressure drop across the filter was also conducted, and the data revealed that the increase of pressure drop per unit of PM10 concentration decreased when RH was higher than approximately 80-85%, as compared with the case when RH was lower than 80-85%. This is perhaps because of more porous structure of deposited particles in the beta-gauge monitor when RH is greater than approximately 80-85%. The theoretical calculation using an evaporation model and a thermodynamic model has been conducted to simulate the beta-gauge readings. The results show that the theoretical PM10 concentrations using the evaporation model are in better agreement with the actual beta-gauge readings than those using the thermodynamic equilibrium model.     

Bioavailability links mode of action can improve the long-term field risk assessment for tilapia exposed to arsenic

The objective of this paper was to develop a mechanistic-based framework to explicitly incorporate the factors controlling the bioavailability, toxicodynamics and mode of action to enhance predictive ability of arsenic (As) toxicity to protect the health of farmed tilapia Oreochromis mossambicus. We linked the biotic ligand model and damage assessment model to develop a toxicokinetic model for elucidating the site-specific temporal changes of As bioavailability and to characterize how the fish regulate the metal toxicity. We built a bioavailability-mode of action-based growth toxicity model by linking a bioenergetic growth model and damage assessment model to predict how the As affects on the tilapia growth in the entire life span in site-specific field ecosystems. Here we show that the proposed model well describes the water-chemistry-dependent toxicokinetics and toxicodynamics variations of As to tilapia. We selected two local tilapia farms with different water chemistries located at southwestern Taiwan coast region to implement the proposed algorithm to predict the risk of As exposure. Results indicate that the growth toxicity of O. mossambicus in Taihsi is more sensitive than that in Peimen. We found that the effect of ion competition on the As bioavailability and their ecotoxicological effects on tilapia are more obvious in Taihsi comparing with that in Peimen. We suggested that the proposed bioavailability- and mode of action-based framework can be used to capture the biological response and regulation of tilapia to As exposures. It is applicable for a site-specific and long-term ecotoxicological risk assessment.