Fate of polycyclic aromatic hydrocarbons during vitrification of incinerator ash in a coke bed furnace

Fate of polycyclic aromatic hydrocarbons (PAHs) during the vitrification of fly ash and bottom ash from the municipal waste incinerator in a coke bed furnace was investigated. In this system, both coke and lime were added to enhance the melting reaction. The major PAH sources in this system were ash and coke, which respectively contributed 97% and 3% of PAHs in the input-mass. During vitrification process, low molecular PAHs (LM-PAH, 2-3-ring), median molecular PAHs (MM-PAH, 4-ring) and high molecular PAHs (HM-PAH, 5-7-ring) mass respectively accounted for >99%, >99% and 84% of the output-mass emitted as the stack flue gas; while those discharged from the slag were <1%, <1% and 16%, respectively. The O/I (output-mass/input-mass) ratio of LM-, MM- and HM-PAHs were 0.063, 0.002 and <0.001, respectively. The high distribution in flue gas and O/I ratio of LM-PAHs is reasonable since they are more easily evaporated, hence difficult to be removed by air pollution control devices. On the contrary, the HM-PAHs, having lower vapor pressure, primarily stays mainly in slag. Based on the 21 total PAH content in feeding ash and slag, the reduction efficiency of the coke bed furnace was >99.9%. To minimize the risk of secondary pollution, the efficiency of coke bed furnace should be improved to reduce the PAH emission into ambient air.     

Delayed association of acute particulate matter 2.5 air pollution exposure with loss of complexity in cardiac rhythm dynamics: insight from detrended fluctuation analysis

Environmental Science and Pollution Research - There is a delayed (lag 1 to 2&nbsp;days) correlation between acute PM 2.5 (particulate matter &lt;?2.5&nbsp;μm in aerodynamic...     

Characterization of atmospheric PM10 and related chemical species in southern Taiwan during the episode days

The concentrations of atmospheric PM10 on days with episodes of pollution were examined at four different sampling sites (CC, DL, LY, and HK) in southern Taiwan. The related to particulates water-soluble ionic species (Na+, K+, Mg2+, Ca2+, NH4+, Cl-, NO3-, SO4(2-)), carbonaceous species (EC and OC) and metallic species (Zn, Ni, Pb, Fe, Mn, Al, Si, V) were also analyzed. On the episode days of this study, the PM10 mass concentration ranged from 155 to 210 microgm(-3), from 150 to 208 microgm(-3), from 182 to 249 microgm(-3), and from 166 to 228 microgm(-3) at CC, DL, LY, and HK, respectively. The results indicate that the dominant water-soluble species were SO4(2-), NO3-, NH4+, and Cl- at the four sampling sites on these days. Moreover, the high sulfate and nitrate conversion values (SOR and NOR) presented herein suggest that secondary formations from SO2 to SO4(2-) and from NO2 to NO3- are present in significant quantities in the atmosphere of southern Taiwan on episode days. In particular, high SOR and NOR verified that both SO4(2-) and NO3- dominated the increase of atmospheric PM10 concentration in southern Taiwan on episode days.     

Restructured frame‐of‐reference training improves rating accuracy

The use of heuristic judgments is prevalent in organizations and negatively impacts accurate employee assessments. To minimize the negative impact of heuristic judgments (i.e., anchoring and adjustment), we aim to improve rating accuracy by restructuring frame‐of‐reference (FOR) training. We conducted five studies (N = 1,143) using different samples (three including participants with hiring experience), training environments (onsite and online), and rating contexts (evaluations of sales representatives, teachers, contract negotiation specialists, and retail store managers). Across the five studies, the average improvement in rating accuracy was at least twice as large for restructured FOR (vs. control) training as it was for typical FOR (vs. control) training; the difference in rating accuracy between restructured and typical FOR training was statistically significant. Furthermore, minimizing the anchoring effect rather than increasing opportunities for rating adjustments improved rating accuracy (Study 4). Finally, restructured FOR training achieved higher criterion validity (i.e., a higher strength of the association between ratings regarding a target and the target's objective performance) than did typical FOR training (Studies 3 and 5). We discuss implications for improving the effectiveness of diverse training programs and the accuracy of judgments in organizations.     

Pah characteristics in ambient air within a steel industrial complex

Ambient air samples at ten sites in an iron and steel industrial complex were collected from June to December for analyzing polycyclic aromatic hydrocarbons (PAHs). Sixteen species of PAH components in air samples were identified. The results indicate that both gaseous phase and particle‐bound PAHs at the top of the cokemaking plants are unusually high. The profiles of particle‐bound PAHs indicate that the predominant species at the top of, the coke oven batteries are those of high molecular weight components. The major components of particle‐bound PAHs at sampling sites near the fenceline, however, include the medium molecular weight components. The PAH profiles of air samples within the industrial complex show a strong similarity to those of cokemaking plant samples. The concentrations and the specific content of benzo(a)pyrene in the iron and steel industrial complex are higher than those values measured in urban area, petrochemical industry park, and open‐air burning area.     

Composting of vegetable waste.

The effects of the aeration, seeding, and agitation on the composting of vegetable waste were studied in a laboratory-scale reactor. Experimental results showed that the final product at the end of a 4-day composting period met multiple maturity indices suggested by many researchers. The evolution of carbon dioxide during the composting process could be modelled with a modified Gompertz equation that described the bacteria growth successfully. Multivariate regression analysis was used to study the effects of operating parameters on the carbon conversion. The response surface contour plots were constructed using the regression equation for the examination of the dependence of carbon conversion on operating parameters. The maximum carbon conversion of 14.54% was obtained when the percentage of seeding was set at 14.5%, the air suction rate was set at 2.6 L kg(-1) dry-solid min(-1), and the agitator operated half of the time, alternating on and off for every 5 min. Future work will focus on the application of the data and the experience gained in this work to composters of pilot and semi-commercial scales.     

Reproduction and population dynamics of the fissiparous brittle star Ophiactis savignyi (Echinodermata: Ophiuroidea)

Reproductive cycle, asexual reproduction, and population dynamics of the fissiparous brittle star, Ophiactis savignyi, which inhabits the exhalant passages of the sponge Haliclona sp. were examined monthly from February 1991 to January 1992 at Wanlitung, southern Taiwan (22°N; 120°E). Mature gametes were found from March to December, but release was mainly in May and June. Sexual recruits were found from May to December, with the highest frequency (14.1% of population) in June. Sexual recruits composed 2.4% of the 1-yr sample. Sex ratio of male to female was 24:1. Fission occurred throughout the year, although the frequency of recently split individuals was lower from January to June (6 to 31%), and higher from July to December (42 to 52%). The occurrence of fission was highest after spawning. Regenerating individuals composed 48.2% of the 1-yr sample. Population density fluctuated greatly during summer due to recruitment by fission and mortality or dispersal due to the stressful environmental conditions. Both sexual and asexual reproduction of O. savignyi were successful at this site.     

Inorganic Acid Emission Factors of Semiconductor Manufacturing Processes

Abstract

A huge amount of inorganic acids can be produced and emitted with waste gases from integrated circuit manufacturing processes such as cleaning and etching. Emission of inorganic acids from selected semiconductor factories was measured in this study. The sampling of the inorganic acids was based on the porous metal denuders, and samples were then analyzed by ion chromatography. The amount of chemical usage was adopted from the data that were reported to the Environmental Protection Bureau in Hsin-chu County according to the Taiwan Environmental Protection Agency regulation. The emission factor is defined as the emission rate (kg/month) divided by the amount of chemical usage (L/month). Emission factors of three inorganic acids (i.e., hydrofluoric acid [HF], hydrochloric acid [HQ], and sulfuric acid [H₂SO₄]) were estimated by the same method. The emission factors of HF and HCl were determined to be 0.0075 kg/L (coefficient of variation [CV] = 60.7%, n = 80) and 0.0096 kg/L (CV = 68.2%, n = 91), respectively. Linear regression equations are proposed to fit the data with correlation coefficient square (R²) = 0.82 and 0.9, respectively. The emission factor of H₂SO₄, which is in the droplet form, was determined to be 0.0016 kg/L (CV = 99.2%, n = 107), and its R² was 0.84. The emission profiles of gaseous inorganic acids show that HF is the dominant chemical in most of the fabricators.     

Integrated model of simulated occupant injury risk and real medical costs

Introduction

The purpose of this study was to develop an integrated methodology that links occupant injury risk functions, estimated in the laboratory, with real world medical treatment costs by using the abbreviated injury score (AIS). Using our model, the expected medical treatment costs for crash injuries to various body regions and of different severities can be investigated.

Methods

First, the simulation results are compared with NHTSA crash data. We used a modified kinematics simulation model that incorporates an F = E^b function as a supplement to the previous Steffan's model to obtain a more accurate acceleration history a(t). Second, head injury criteria HIC₃₆ can be calculated from a(t), and we use the injury probability P as a function of HIC_36, as proposed by Kuppa, to obtain the injury risk function for various AIS values. Third, medical treatment cost models for various AIS values can be calculated by using a regression cost model with real world data. Finally, the injury risk function and medical treatment cost models are linked through AIS values. We establish an integrated methodology and predict medical costs and car safety data using real world police reports, medical treatment costs, and laboratory simulation results.

Results

Using head injuries in frontal crashes as an example, we focus on simulation parameters for different vehicle models, with and without airbags. We specifically examine impact closing speed, Delta-V, and impact directions.

Conclusion

Simulation results can be used to supplement insufficient real crash data, in particular ΔV, and injury risk results from police crash reports.

Impact on industry

The proposed integrated methodology may provide the vehicle industry with a new safety assessment method. Real crash data coupling provides consumers with more realistic and applicable information.