Sensitivity analysis and evaluation of microFacCO: a microscale motor vehicle emission factor model for CO emissions

This paper presents a sensitivity analysis of a microscale emission factor model (MicroFacCO) for predicting real-time site-specific motor vehicle CO emissions to input variables, as well as a limited field study evaluation of the model. The sensitivity analysis has shown that MicroFacCO emission estimates are very sensitive to vehicle fleet composition, speed, and ambient temperature. For the present U.S. traffic fleet, the CO emission rate (g/mi) is increased by more than 500% at 5 mph in comparison with a speed greater than 40 mph and by approximately 67% at ambient temperatures of 45 degrees F and > or = 95 degrees F in comparison with an ambient temperature of 75 degrees F. The input variable "emission failure standard rate" is more sensitive to estimating emission rates in the 1990s than in the 2000s. The estimation of emission rates is not very sensitive to relative humidity. MicroFacCO can also be applied to examine the contribution of emission rates per vehicle class and model year. The model evaluation is presented for tunnel studies at five locations. In general, this evaluation study found good agreement between the measured and the modeled emissions. These analyses and evaluations have identified the need for additional studies to update the high-speed (>35 mph) air conditioning (A/C) correction factor and to add effects due to road grades. MicroFacCO emission estimates are very sensitive to the emission standard failure rate. Therefore, the model performance can be greatly improved by using a local emission standard failure rate.     

Experimental design methodology for the preparation of carbonaceous sorbents from sewage sludge by chemical activation--application to air and water treatments

The objective of this study is to optimize experimental conditions of sorbent preparation from sewage sludge using experimental design methodology. Series of carbonaceous sorbents have been prepared by chemical activation with sulfuric acid. The sorbents produced were characterized, and their properties (surface chemistry, porous and adsorptive properties) were analyzed as a function of the experimental conditions (impregnation ratio, activation temperature and time). Carbonaceous sorbents developed from sludge allow copper ion, phenol and dyes (Acid Red 18 and Basic Violet 4) to be removed from aqueous solution as well as VOC from gas phase. Indeed, according to experimental conditions, copper adsorption capacity varies from 77 to 83 mg g(-1), phenol adsorption capacity varies between 41 and 53 mg g(-1) and VOC adsorption capacities (acetone and toluene) range from 12 to 54 mg g(-1). Each response has been described by a second-order model that was found to be appropriate to predict most of the responses in every experimental region. The most influential factors on each experimental design response have been identified. Regions in which optimum values of each factor were achieved for preparation of activated carbons suitable for use in wastewater and gas treatments have been determined using response surfaces methodology. In order to have a high mass yield and to minimize the energetic cost of the process, the following optimal conditions, 1.5 g of H2SO4 g(-1) of sludge, 700 degrees C and 145 min are more appropriate for use of activated carbon from sludge in water and gas treatments.     

Analysis of some organochlorine pesticides in an urban atmosphere (Strasbourg, east of France)

High volume samples of urban air have been collected in Strasbourg, a big city situated in the east of France, for the evaluation of the contamination by organochlorine pesticides. Pesticides (p,p'-DDT, p,p'-DDD, p,p'-DDE, aldrin, dieldrin, endrin, gamma-HCH, cis-chlordane, trans-chlordane, alpha-endosulfan, beta-endosulfan, hexachlorobenzene, heptachlor and some of their metabolites: alpha-HCH, 2,4'-DDT, 2,4'-DDD and 2,4'-DDE) were analysed by GC-ECD. Prior to analysis, samples were Soxhlet extracted with a mixture of n-hexane/methylene chloride. The analysis of samples collected in 2001 (n = 6), 2002 (n = 7) and 2003 (n = 5) shows that alpha-HCH and gamma-HCH were detected in all samples (between 0.05 and 4 ng m(-3) and between 0.01 and 1 ng m(-3), respectively) along with aldrin and dieldrin at lower concentrations (between 0.01 and 0.08 ng m(-3) and between 0.02 and 0.09 ng m(-3), respectively). Other pesticides were detected very randomly at very low concentrations. The calculation of the alpha/gamma-HCH ratio shows that hexachlorocyclohexane measured in the atmosphere have a local origin and come probably from contaminated soil by volatilisation. alpha and beta-endosulfan were practically not detected in samples collected in 2001 and 2002 while they were always measured in the gas phase in samples from 2003. This observation can be explained by an increase of volatilisation with the increase of the air temperature. In July, temperature were higher (between 17 and 30 degrees C in climatic station) than in March-May 2001 and 2002 (between 2 and 19 and between 2 and 10, respectively).     

Optimal Control Models and Elicitation of Attitudes towards Climate Damages

This paper examines the consequences of various attitudes towards climate damages through a family of stochastic optimal control models (RESPONSE): cost-efficiency for a given temperature ceiling; cost-benefit analysis with a pure preference for current climate regime and full cost-benefit analysis. The choice of a given proxy of climate change risks is actually more than a technical option. It is essentially motivated by the degree of distrust regarding the legitimacy of an assessment of climate damages and the possibility of providing in due time reliable and non controversial estimates. Our results demonstrate that (a) for early decades abatement, the difference between various decision-making frameworks appears to matter less than the difference between stochastic and non stochastic approach given the cascade of uncertainty from emissions to damages; (b) in a stochastic approach, the possibility of non-catastrophic singularities in the damage function is sufficient to significantly increase earlier optimal abatements; (c) a window of opportunity for action exists up to 2040: abatements further delayed may induce significant regret in case of bad news about climate response or singularities in damages.     

Cloudwater studies at a high elevation site in the Vosges Mountains (France)

Cloud and rainwater samples have been collected at a high elevation site in the Vosges Mountains. An automated collection system has been used to collect bulk cloudwater and small cloudwater droplets. Bulk cloudwater concentrations were up to 10 times more concentrated than rainwater concentrations. Small clouddroplets showed generally higher concentrations than bulk cloudwater. Nevertheless, the enrichment factors depend on the compounds under study and appear to be related to the composition of the cloud condensation nuclei forming small or large clouddroplets. Principal component analysis and factor analysis were applied to the collected datasets and confirmed the influence of the cloud condensation nuclei on the composition difference between small and large cloudwater droplets.     

Environmental impact of two successive chemical treatments in a small shallow eutrophied lake: Part II. Case of copper sulfate

The appearance of cyanobacteria ( > 10 colony per ml) was not prevented after alum treatment. In order to prevent cyanobacteria efflorescences in a small shallow polymictic lake (Courtille, France), copper sulfate was applied. Treatment level was 63 microg 1(-1) as Cu2+ from CUSO4, 5 H2O. Cyanobacteria were kept under control during the summer. Microcystis sp. completely disappeared, which allowed swimming in the lake throughout the tourist season. Microcystis only reappeared 2 months after the treatment. Copper content in the water column only returned to its background level 2 months after copper addition. This high residence time of copper in the water might have been caused by complexation and adsorption of copper on natural organic matter, whose level was high in the ecosystem studied. A mechanism of transfer of 'truly' dissolved copper towards particulate copper has been underlined and explains the disappearance of this fraction of copper in the water column.     

Suspended particulate matter determines physical speciation of Fe,Mn, and trace metals in surface waters of Loire watershed

This study investigates the spatiotemporal variability of major and trace elements, dissolved organic carbon (DOC), total dissolved solids (TDS), and suspended particulate matter (SPM) in surface waters of several hydrosystems of the Loire River watershed in France. In particular, this study aims to delineate the impact of the abovementioned water physicochemical parameters on natural iron and manganese physical speciation (homoaggregation/heteroaggregation) among fine colloidal and dissolved (<?10 nm), colloidal (10–450 nm) and particulate (>?450 nm) phases in Loire River watershed. Results show that the chemistry of the Loire River watershed is controlled by two end members: magmatic and metamorphic petrographic context on the upper part of the watershed; and sedimentary rocks for the middle and low part of the Loire. The percentage of particulate Fe and Mn increased downstream concurrent with the increase in SPM and major cations concentration, whereas the percentage of colloidal Fe and Mn decreased downstream. Transmission electron microscopy analyses of the colloidal and particulate fractions (from the non-filtered water sample) revealed that heteroaggregation of Fe and Mn rich natural nanoparticles and natural organic matter to the particulate phase is the dominant mechanism. The heteroaggregation controls the partitioning of Fe and Mn in the different fractions, potentially due to the increase in the ionic strength, and divalent cations concentration downstream, and SPM concentration. These findings imply that SPM concentration plays an important role in controlling the fate and behavior of Fe and Mn in various sized fractions.

Physical speciation by heteroaggregation of (Fe-Mn) compounds: high [SPM]?→?[Fe-Mn] particulate faction; low {SPM]?→?[Fe-Mn] colloid-dissolved fraction.

     

Cytogenetic analysis of human oocytes after subzonal insemination

Subzonal insemination has been proposed to achieve fertilization in cases where standard in vitro fertilization has failed. We present the results of chromosome analysis of oocytes after subzonal insemination. Our data suggest that the main cause (76 per cent) of the absence of cleavage after subzonal insemination is the total absence of sperm nucleus evolution of the injected spermatozoa. Our results also suggest that spermatozoa chromatin development is normal after subzonal insemination. Aneuploidy does not seem to be increased in zygotes after subzonal insemination. However, polyploidy was often more important than predicted by the observation of pronuclei (PN). Pronucleus development might be asynchronous and can appear earlier or later than after standard IVF. The cytogenetic risk after subzonal insemination might therefore be triploidy (if a triploid egg is transferred, because only 2 PN were seen) rather than aneuploidy or structural abnormalities.     

Queen movement during colony emigration in the facultatively polygynous ant Pachycondyla obscuricornis

In ants, nest relocations are frequent but nevertheless perilous, especially for the reproductive caste. During emigrations, queens are exposed to predation and face the risk of becoming lost. Therefore the optimal strategy should be to move the queen(s) swiftly to a better location, while maintaining maximum worker protection at all times in the new and old nests. The timing of that event is a crucial strategic issue for the colony and may depend on queen number. In monogynous colonies, the queen is vital for colony survival, whereas in polygynous colonies a queen is less essential, if not dispensable. We tested the null hypothesis that queen movement occurs at random within the sequence of emigration events in both monogynous and polygynous colonies of the ponerine ant Pachycondyla obscuricornis. Our study, based on 16 monogynous and 16 polygynous colony emigrations, demonstrates for the first time that regardless of the number of queens per colony, the emigration serial number of a queen occurs in the middle of all emigration events and adult ant emigration events, but not during brood transport events. It therefore appears that the number of workers in both nests plays an essential role in the timing of queen movement. Our results correspond to a robust colony-level strategy since queen emigration is related neither to colony size nor to queen number. Such an optimal strategy is characteristic of ant societies working as highly integrated units and represents a new instance of group-level adaptive behaviors in social insect colonies.