Application of remote sensing to exposure monitoring

Although exposure assessments cannot be completed remotely, remote sensing techniques provide an invaluable adjunct in exposure monitoring programs. Exposure can be defined as the summation over time, in all media, of the amount of a pollutant available at the exchange boundaries of the receptor during a specified period. This paper describes a few remote monitoring techniques that provide direct measurement input into an exposure assessment and several that furnish quantitative or qualitative information leading to decisions regarding how to monitor, such that the source-exposure-dose relationships can be fully defined. Two general classes of remote sensing systems are included in this discussion-passive and active. Passive systems depend on a measurement of the energy reflected or emitted by a target and active systems use an energy source, e.g., a laser to perform the environmental interrogation. Airborne as well as ground-based remote monitoring measurements or systems are also considered in this paper.     

Application of multimedia exposure assessment to drinking water

A potentially important exposure route for humans is the ingestion of chemicals via drinking water. If comprehensive exposure assessments are to be completed for either existing or proposed new chemicals and cost effective control strategies developed, then a quantitative understanding of multimedia transport and fate of specific chemical pollutants must be achieved. Mathematical models provide a powerful framework into which quantitative relationships may be placed to provide guidance in reaching water quality goals. Existing, state-of-the-art media-specific toxic organic transport and fate models for atmospheric (DiDOT), land surface (NPS) and surface water processes (EXAMS) and potable water treatment (WTP) have been linked to demonstrate the technical feasibility of such an approach. Limited application and sensitivity testing of this linked modeling system has shown that the impact of various source loadings and control strategies on drinking water quality can be estimated.     

Measurement of atmospheric concentrations of common household pesticides: A pilot study

Air concentrations of 28 of the most commonly used household pesticides were measured inside nine homes in Jacksonville, Florida, and compared with corresponding outdoor levels. The households selected were sorted into three categories according to the degree of pesticide indoor usage. Personal air monitoring was also performed on one resident of each household by means of a portable sampler, which was kept with the person at all times. Five of the pesticides were found in the air inside of the majority of the homes at concentrations as high as 15 gm^–3 (average concentrations, 12 ngm^–3 to 2.4 gm^–3). Indoor levels were generally one to two ordrrs of magnitude higher than surrounding outdoor air levels and personal air measurements were within ± 50% of corresponding indoor values. All samples were collected over 24-hr periods on polyurethane foam and analyzed by capillary colum gas chromatography with mass spectrometric and/or electron capture detection.     

Public participation in environmental monitoring: A means of attaining network capability

In the Puget Sound region of the United States a task force of community volunteers using bees monitored environmental pollution. This paper discusses advantages and limitations of public involvement in the assessment of regional environmental problems, particularly with respect to biological monitoring. This approach not only yielded extensive information about pollution levels but also was very cost effective.Work supported by Cooperative Agreement CR-810035-01-0 with the U.S. Environmental Protection Agency, Environmental Research Laboratory, Corvallis, Oregon, U.S.A.     

Estimating means and variances: The comparative efficiency of composite and grab samples

This paper compares the efficiencies of two sampling techniques for estimating a population mean and variance. One procedure, called grab sampling, consists of collecting and analyzing one sample per period. The second procedure, called composite sampling, collectsn samples per period which are then pooled and analyzed as a single sample. We review the well known fact that composite sampling provides a superior estimate of the mean. However, it is somewhat surprising that composite sampling does not always generate a more efficient estimate of the variance. For populations with platykurtic distributions, grab sampling gives a more efficient estimate of the variance, whereas composite sampling is better for leptokurtic distributions. These conditions on kurtosis can be related to peakedness and skewness. For example, a necessary condition for composite sampling to provide a more efficient estimate of the variance is that the population density function evaluated at the mean (i.e.f()) be greater than . If , then a grab sample is more efficient. In spite of this result, however, composite sampling does provide a smaller estimate of standard error than does grab sampling in the context of estimating population means.     

Sampling and analysis for radon-222 dissolved in ground water and surface water

Radon-222 is a naturally occurring radioactive gas in the uranium-238 decay series that has traditionally been called, simply, radon. The lung cancer risks associated with the inhalation of radon decay products have been well documented by epidemiological studies on populations of uranium miners.The realization that radon is a public health hazard has raised the need for sampling and analytical guidelines for field personnel. Several sampling and analytical methods are being used to document radon concentrations in ground water and surface water worldwide but no convenient, single set of guidelines is available. Three different sampling and analytical methods-bubbler, liquid scintillation, and field screening-are discussed in this paper. The bubbler and liquid scintillation methods have high accuracy and precision, and small analytical method detection limits of 0.2 and 10 pCi/l (picocuries per liter), respectively. The field screening method generally is used as a qualitative reconnaissance tool.     

Biodegradability: An assessment of commercial polymers according to the Canadian method for anaerobic conditions

The degradation of several biodegradable polymers was measured as a result of exposure to an anaerobic medium. The polymers investigated included materials based upon polylactic acid, polylactone, and poly(hydroxy butyrate/valerate) as well as those incorporating starch-based materials. The degradation was monitored by methane and carbon dioxide evolution. In addition, the physical and chemical changes were noted as a result of exposure. These measurements included changes in mass, dimension, and molecular weight. FTIR, UV-vis, proton, and¹³C NMR spectra were also recorded prior to and after exposure. The results clearly indicated that several biological and chemical degradation processes were occurring with the biodegradable polymers studied.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Issued as NRCC No. 37549.     

Empowering women. The solution to a global crisis

Norway's Prime Minister Gro Harlem Brundtland holds a medical degree from the University of Oslo and a Master's degree in Public Health from Harvard University. She served as Norway's Minister of the Environment during 1974-79, and was elected to the Norwegian parliament in 1977. Brundtland is currently chairperson of the World Commission on Environment and Development with ten years of experience as a physician and twenty years as a politician. An edited version of her keynote address to the 1994 International Conference on Population and Development is presented. The Minister's experience has taught her that improved life conditions, a greater range of choices, access to unbiased information, and true international solidarity are the signs of human progress. She stresses the need to empower people, educate them, care for their health, and provide them with equal opportunity to achieve economically. Available combined resources need to be used more efficiently through a reformed and better coordinated UN system, policies must be changed, the role and status of women strengthened, safe, comprehensive reproductive health services provided, and measures taken to achieve a balance between population size and sustainable development in keeping with available global resources.     

Life-history parameters and vertical distribution of Maurolicus muelleri in Masfjorden in summer

Population characteristics, individual life-history variables, feeding and vertical distribution of the mesopelagic fish Müller's pearlside Maurolicus muelleri collected in 1990 in Masfjorden, western Norway, are reported as well as environmental variables from the fjord. Minimum size at maturity was far smaller than reported from previous investigations in the same region. Fecundity was size-dependent and total egg numbers were higher than reported from other investigations of M. muelleri world wide, while the number of maturing eggs was far lower than observed in the same region earlier. Food concentration in the fjord was an order of magnitude lower than previous early summer observations, and several factors indicated that feeding opportunities may have been low for a long period. Daily feeding rate (g prey g^-1 fish) decreased with increasing fish size. These observations fit well with a model of maximizing fitness by means of a flexible size at maturity. Minimum age at maturity seems to be achieved at the expense of fecundity. M. muelleri was concentrated in a 20 to 30 m deep sound scattering layer (SSL). The SSL stayed close to the surface during the night and at 100 to 180 m during the daytime. The vertical position of the SSL varied instantaneously with changes in surface light intensity, remaining at 10^-3 to 10^-4 mol m^-1 s^-1 at the top of the SSL. Stomach fullness was highest during the night; feeding intensity seems to have been peaked at dusk. Cladocerans were the main prey ranked by number, copepods by biomass. Intake of large copepods increased with fish size.     

Effects of sulfide exposure history and hemolymph thiosulfate on oxygen-consumption rates and regulation in the hydrothermal vent crab Bythograea thermydron

The hydrothermal vent crab Bythograea thermydron is exposed to high environmental concentrations of sulfide and low levels of oxygen for extended periods of time. It has previously been shown that hydrogen sulfide is oxidized to the relatively non-toxic thiosulfate (S₂O ₃ ^2– ), which accumulates in the hemolymph. Hemolymph thiosulfate levels in freshly captured crabs vary significantly among crabs from different hydrothermal vent sites as well as between crabs from different microhabitats within the same site. Hemolymph thiosulfate concentrations were not significantly different between crabs captured at the same site 6 mo apart. Hemolymph thiosulfate concentrations ranged from 66 mol 1^–1 in a crab captured at a site with relatively low sulfide venting, to 3206 mol 1^–1 in an individual that was netted from an active smoker vent with much higher sulfide exposure. The differences in hemolymph thiosulfate between sites and the stability of hemolymph thiosulfate in crabs captured at the same site at different times suggest that sulfide exposure is significantly different between sites and that this exposure may not vary significantly over the course of a few months. B. thermydron experimentally exposed to sulfide had high levels of thiosulfate in their hemolymph and increased abilities to regulate oxygen consumption in conditions of low oxygen. This enhancement of regulatory abilities suggests that the previously demonstrated increased hemocyaninoxygen (Hc–O₂) affinity due to elevated thiosulfate may be adaptive in vivo. Average oxygen-consumption rates were much higher in crabs experimentally exposed to sulfide than in unexposed crabs. Crabs injected with isosmotic thiosulfate did not have increased oxygen-consumption rates as did the sulfide-exposed individuals, but did show a similar reduction in P _c (the critical partial pressure of oxygen at which crabs can no longer regulate oxygen consumption). This suggests that it is the sulfide exposure and/or detoxification rather than the elimination of thiosulfate that causes the increase in metabolic rate. Thiosulfate diffuses into dead crabs and into live crabs exposed to 15 mmol S₂O ₃ ^2- l^–1, indicating substantial permeability, and yet live crabs are able to eliminate thiosulfate when incubated in sea water containing 1.5 mmol S₂O ₃ ^2- l^–1, suggesting a process that has an active component.