Estimation of the recycled content of an existing construction project

The Government's Sustainable Buildings Task Group recently recommended a benchmark requirement for a minimum 10% of reused/reclaimed or recycled content (by material value) in construction projects. The benchmark would be implemented through Building Regulations and public sector procurement. This paper presents the findings of a pilot study to inform decision-making on the feasibility of setting and meeting such a requirement.The project involved determining current levels of recycled content in Defence Estates’ standard design for modern barracks accommodation, and quantifying the scope to increase this content. The existing designs for the new barracks were found to use nearly 20% recycled and recovered materials. The project identified opportunities to increase this proportion to nearly 25% with no increase in cost or risk.     

Safety assessment for accident of cooling loop failure (ACLF) in lunar nuclear power reactor (LNPR)

The safety assessment of an accident in the lunar base power plant is investigated for the stability of the operation. The lunar surface reactor is modeled for this study. The accident of cooling loop failure (ACLF) is one of the important scenarios for the virtual case in the moon nuclear power plant (NPP). The newly designed lunar nuclear power reactor (LNPR) is suggested for the commercial purpose. The system dynamics (SD) is used for the simulation of the safety assessment. The cyclic variation of the lunar surface temperature can affect to the physical situation of the coolant, which is expressed by the time step. The result shows the performance possibility of the long term cooling increases slightly in the short period of the time step. The dynamical simulation of the lunar environment is performed for the conceptual design of the NPP.     

Effects of heavy rainfall on the composition of airborne bacterial communities

Wet deposition scavenges particles and particle-associated bacteria from the air column, but the impact of raindrops on various surfaces on Earth causes emission of surface-associated bacteria into the air column. Thus, after rainfall, these two mechanisms are expected to cause changes in airborne bacterial community composition (BCC). In this study, aerosol samples were collected at a suburban site in Seoul, Korea before and after three heavy rainfall events in April, May, and July 2011. BCC was investigated by pyrosequencing the 16S rRNA gene in aerosol samples. Interestingly, the relative abundance of non-spore forming Actinobacteria operational taxonomic units (OTUs) was always higher in post-rain aerosol samples. In particular, the absolute and relative abundances of airborne Propionibacteriaceae always increased after rainfall, whereas those of airborne Firmicutes, including Carnobacteriaceae and Clostridiales, consistently decreased. Marine bacterial sequences, which were temporally important in aerosol samples, also decreased after rainfall events. Further, increases in pathogen-like sequences were often observed in post-rain air samples. Rainfall events seemed to affect airborne BCCs by the combined action of the two mechanisms, with potentially adverse effects on human and plant health.

Open image in new window

     

Estimation of 222Rn release from the phosphogypsum board used in housing panels

Phosphogypsum board is a popular construction material used for housing panels in Korea. Phosphogypsum often contains (226)Ra which decays into (222)Rn through an alpha transformation. (222)Rn emanated from the (226)Ra-bearing phosphogypsum board has drawn the public concern due to its potential radiological impacts to indoor occupants. The emanation rate of (222)Rn from the board is estimated in this paper. A mathematical model of the emanation rate of (222)Rn from the board is presented and validated through a series of experiments. The back diffusion effect due to accumulation of (222)Rn-laden air was incorporated in the model and found to have a strong impact on the (222)Rn emanation characteristics.     

反渗透膜在分散型农村饮用水深度处理中开发应用研究

以反渗透膜为主,综合集成超滤、微滤、砂滤、活性碳吸附、紫外线消毒等技术措施．设计安装了适合农村自来水、井水、河水不同饮用水源深度净化处理的3套设备。运行结果表明,设备对于饮用水源中的有机物、微生物、色味臭,以及自来水中的余氯,处理效果非常明显。研究成果为解决分散型农村安全饮用水问题．提供了比较好的技术方案。     

Remediation of arsenic-contaminated soils and washing effluents

Laboratory experiments were conducted to determine the distribution of various arsenic species in tailings and soils. Other specific goal of the tests were to evaluate the extraction efficiency of arsenic using alkaline or acid washing, to determine optimum operational parameters of alkaline washing, and to evaluate the arsenic precipitation of washing effluents by pH adjustment or ferric chloride addition. Alkaline washing using sodium hydroxide was found to be favorable in removing arsenic from tailings or soils having a higher portion of arsenic in the operationally defined crystalline mineral fraction of crystalline oxide and amorphous aluminosilicates. This is due to the ligand displacement reaction of hydroxyl ions with arsenic species and high pH conditions that can prevent readsorption of arsenic because predominant negatively charged crystalline oxides do not attract the negatively charged oxyanions. For tailings, sodium hydroxide had 10-20 times higher extraction efficiencies than hydrochloric- or citric acid. The optimum concentration of sodium hydroxide for soil washing was determined to be 200 mM for all samples, while the optimum ratios were 10:1 and 5:1 for tailings and field/river sedimentary soils, respectively. The washing effluent of river soil was effectively treated by adjusting pH to 5-6 with hydrochloric acid, resulting in arsenic concentrations of <50 microgl(-1). In the case of field soil effluent, an addition of ferric chloride with a minimum mass ratio of 11 (Fe/As) was needed to reduce the arsenic below 50 microgl(-1).     

Characteristics of Ion Components and Trace Elements of Fine Particles at Gosan, Korea in Spring time from 2001 to 2002

Size-segregated measurements of the composition of an aerosol are used to determine the transport of natural and anthropogenic aerosols to the Gosan site in springtime from 2001 to 2002. Although the transport of Asian dust is a well-known phenomenon in springtime, this study shows that not only is soil dust transported into Gosan each spring but so are anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Zn, Ni, K, S. This study also combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of the anthropogenic aerosols. Finally, four types of transport episodes were identified: (1) anthropogenic pollutants, (2) dust storm mixed with the anthropogenic aerosols, (3) typical dust storms, (4) some sea salt with clean air mass. Overall, in addition to typical soil dust, a large amount of anthropogenic aerosols, whether mixed with the soil dust or not, are transported to Gosan each spring.     

Practical field application of a novel BOD monitoring system

A biochemical oxygen demand (BOD) monitoring system, based on electrochemically-active bacteria in combination with a microbial fuel cell, has been developed for the purpose of on-site, on-line and real-time monitoring of practical wastewater. A microbial fuel cell that had been enriched with electrochemically-active bacteria was used as the basis of the measurement system. When synthetic wastewater was fed to the system, the current generation pattern and its Coulombic yield were found to be dependent on the BOD5 of the synthetic wastewater. A linear correlation between the Coulombic yields and the BOD5 of the synthetic wastewater were established. Real wastewater obtained from a sewage treatment plant also produced a highly linear correlation between the Coulombic yield and BOD5 in the system. To examine on-site, on-line and real-time monitoring capability, the BOD monitoring system was installed at a sewage treatment plant. Over 60 days, the measurement system was successfully operated with high accuracy and good stability with the measuring period for a sample being 45 min. This application showed that the application of the measurement system was a rapid and practical way for the determination of BOD5 in water industries.     

Competitive adsorption characteristics of Co2+, Ni2+, and Cr3+ by IRN-77 cation exchange resin in synthesized wastewater

Adsorption properties of Co2+, Ni2+, and Cr3+ on an Amberlite IRN-77 cation exchange resin were investigated in batch systems. Levels of adsorption rapidly approached an equilibrium state within 1 h. The adsorption characteristics of each metal onto the resin were accurately represented by Langmuir isotherms. Co2+ and Ni2+, which have an equivalent electrovalence, displayed similar levels of adsorption onto the resin when they coexisted in the solution. However, when Cr3+ was added to the solution it competitively replaced Co2+ and Ni2+ ions that had been previously adsorbed onto the resin, resulting in the desorption of these metals into the solution. The result was likely due to a higher adsorption affinity of Cr3+ relative to Co2+ and Ni2+. This implies that interactively competitive adsorption of multi-cations onto the resin should be thoroughly considered when contemplating the efficient operation of an ion exchange process in the treatment of industrial wastewater.     

Quick vaporization of sprayed sodium hypochlorite (NaClO(aq)) for simultaneous removal of nitrogen oxides (NOx), sulfur dioxide (SO2), and mercury (Hg0)

Sodium hypochlorite (NaClO) has been widely used as a chemical additive for enhancing nitrogen oxide (NO_x; NO + NO₂), sulfur dioxide (SO₂), and mercury (Hg⁰) removals in a wet scrubber. However, they are each uniquely dependent on NaClO_(aq) pH, hence making the simultaneous control difficult. In order to overcome this weakness, we sprayed low liquid-to-gas (L/G) ratio (0.1 L/Nm³) of NaClO_(aq) to vaporize quickly at 165 °C. Results have shown that the maximized NO_x, SO₂, and Hg⁰ removals can be achieved at the pH range between 4.0 and 6.0. When NO_x and Hg⁰ coexist with SO₂, in addition, their removals are significantly enhanced by reactions with solid and gaseous by-products such as NaClO_(s), NaClO_2(s), OClO, ClO, and Cl species, originated from the reaction between SO₂ and NaClO_(aq). We have also demonstrated the feasibility of this approach in the real flue gases of a combustion plant and observed 50%, 80%, and 60% of NO_x, SO₂, and Hg⁰ removals, respectively. These findings led us to conclude that the spray of NaClO_(aq) at a relatively high temperature at which the sprayed solution can vaporize quickly makes the simultaneous control of NO_x, SO₂, and Hg⁰ possible.

Implications: The simple spray of NaClO_(aq) at temperatures above 165 °C can cause the simultaneous removal of gaseous NO_x, SO₂, and Hg⁰ by its quick vaporization. Their maximized removals are achieved at the pH range between 4.0 and 6.0. NO_x and Hg⁰ removals are also enhanced by gaseous and solid intermediate products generated from the reaction of SO₂ with NaClO_(aq). The feasibility of this approach has been demonstrated in the real flue gases of a combustion plant.