Comparisons among species ofAlexandrium (Dinophyceae) grown in nitrogen- or phosphorus-limiting batch culture

Three species of the dinoflagellate genusAlexandrium (Halim)-two strains of toxic.A. minutum, one each of nontoxicA. tamarense andA. affini-were grown in batch culture in either a low-nitrogen or a low-phosphate medium. Maximum carbon-specific growth rates forA. tamarense were lower (at <0.25 d^-1) than for the other strains, which all exceeded 0.38 d^-1. C-quotas (C content per cell) during exponential growth were similar for all strains (2.5 ng C cell^-1), with cells becoming smaller during the N-limiting stationary phase, but enlarging during prolonged P-deprivation. Values of ¹³C during the exponential phase were low (-25to-30), with most cells during the light phase swimming at the surface when nutrient-replete and migrating to the bottom of the flasks when nutrient-deplete with ¹³C rising to around-15. Biomass could not be estimated reliably from pigmentation, but could be estimated from biovolume (r>0.95), although this was complicated in cultures ofA. minutum by the presence of particles comprized of thecal plates of a similar size to intact cells. Alkaline phosphatase activity was not a reliable indicator a P-status. The most toxic strain tested (A. minutum AL1V) contained the highest concentrations of free amino acids, of arginine (a precursor of paralytic shellfish toxins) and of proline, and also had the lowest C:N mass ratio (at 4.3).A. affini contained the lowest concentrations of arginine, andA. tamarense the highest exponential phase C:N (7.8). For all strains, the mole ratio of intracellular glutamine: glutamate (Gln: Glu, which was abnormally high compared to other algae) could only be used to indicate the presence or absence of N-stress rather than the degree of stress. Additions of ammonium and phosphate resulted in increases in Gln: Glu within 20 min in N-stressed cells and also enhanced toxin content inA. minutum (mainly gonyautoxin) 4 over a 24 h period.     

Quantitative genetic analysis of growth in larval scallops (Placopecten magellanicus)

We estimated the broad-sense heritability of larval size in 20 full-sib families of the giant scallop, Placopecten magellanicus (Gmelin, 1791) grown in laboratory culture in August and September 1991. The goal was to compare scallops with other bivalves which have been shown to have significant heritabilities for larval growth. Secondly, we estimated the lipid content of occytes from female parents, since this is hypothesized to affect larval growth and survival. Finally, we estimated the among-family variation in mortality from 4 to 21 d as a test of possible genetic variation for viability among larval scallops. Significant genetic variation (h²=1.10 to 1.24) was estimated for larval shell length at 4, 14, and 21 d. There was a significant correlation (r=0.66) between larval size at 4 d and lipid content of oocytes, but only when two females with high levels of lipid oocyte^–1 were excluded as outliers. There was no correlation between larval size at 14 and 21 d and lipid content of oocytes. Mortality among families from 4 to 21 d was high (69 to 97%), and was significantly different among families. These results indicate that there is significant heritability for larval growth which is largely independent of the lipid content of the oocytes. A high heritability for larval growth may indicate that this trait is only weakly correlated with fitness.     

Movements of albacore tuna (Thunnus alalunga) in the South Pacific: Evidence from parasites

Parasites were collected from over 400 albacore (Thunnus alalunga) caught by surface trolling and longlining in the south-west Pacific between 1985 and 1988. Parasites found included 1 apicomplexan, 3 nematode species, 4 cestode species, 1 acanthocephalan, 12 digenean species and 3 copepod species. Twelve of these parasite species which could be accurately recognised and counted were used in the subsequent analyses. Parasite data from albacore caught around New Zealand show a decrease in prevalence of three didymozoid parasites with increasing fish length up to a fork length of 70 to 79 cm. The subsequent increase in prevalence of these didymozoids in large longline-caught fish is consistent with fish returning from spawning in tropical waters where re-infection is presumed to occur. Albacore collected at widely separate locations in the south-west Pacific have differences in parasite prevalence, supporting an hypothesis that juvenile albacore move south to New Zealand from the tropics and do not return until the onset of sexual maturity. Albacore appear to move along the subtropical convergence zone, as indicated by a decline in prevalence and abundance ofAnisakis simplex andHepatoxylon trichiuri from New Zealand to the central South Pacific. This is supported by tagging and seasonal movements of the fishery.     

The mouthparts of the members of the Jaera albifrons group of species (Crustacea: Isopoda)

The mouthparts of Jaera albifrons Leach, Jaera ischiosetosa Forsman, Jaera praehirsuta Forsman and Jaera forsmani Bocquet were examined with the light microscope and the Stereoscan electron microscope, and were found to be identical in all species. The structure of the mouthparts indicate that all four species feed by scouring and abrading algal or bacterial films from rocks or Fucus. Food, therefore, does not seem to be an isolating factor involved in the microdistribution of the four species on a shore.     

No cost of male mating experience on female reproductive success in the almond moth, <Emphasis Type="BoldItalic">Cadra cautella</Emphasis> (Lepidoptera; Pyralidae)

Male copulation experience may have a profound impact on female reproductive success if male reproductive investment declines over consecutive copulations and if females are unlikely to re-mate. Male reproductive investment is particularly interesting in lepidopterans because males produce dimorphic sperm: a fertilizing (eupyrene) and a non-fertilising (apyrene) sperm. In two experiments, we explored the lifetime reproductive investment of male almond moths, Cadra cautella (also known as Ephestia cautella) and examined its influence on female reproductive success. In the almond moth, females re-mate infrequently and males transfer sperm in a spermatophore. Attached to the spermatophore is a large chitinous process, the function of which is unknown. One group of males were permitted consecutive copulations with virgin females and the amount of sperm and size of the spermatophore transferred were compared for all females. We found that the number of both eupyrene and apyrene sperm per ejaculate decreased with his increased mating frequency, while the size of the spermatophore process decreased dramatically after the male’s first copulation. In a second experiment, we allowed males to mate with females throughout their lives and then compared female fecundity and fertilisation success. We found no obvious decrease in female fecundity and fertilisation success with increased male copulation experience, despite the likely reduction in male gametic investment. We discuss potential explanations for the development of this enlarged and elaborate first spermatophore of male almond moths given that it confers no clear fitness advantage to females.     

Worker population structure and gyne production in the ant Myrmica

Summary Wild colonies of Myrmica rubra L. were sampled and cultured in the laboratory to assess their reproductive capability. Correlation analysis was then used to relate the reproductive performance to a number of worker population characteristics. This revealed an association between the magnitude of gyne production and the proportion of nurses in the population. The absence of big workers also increased gyne production.Artificially composed cultures were then made and used to confirm greater resistance of nurses and small workers to queen domination.It is suggested that rapidly growing colonies will have higher proportions of young nurse workers refractory to queens and able to deliver the food necessary for gyne production. Such colonies could optimise their reproduction in this way.     

Population dynamics and growth of juveniles of the velvet swimming crab Necora puber (Decapoda: Portunidae)

Recruitment variability plays a critical role in determining local population densities of benthic organisms, but extreme vulnerability at the onset of juvenile life is a trait that is largely responsible for population survivorship trends. The aim of the present study was to determine the role of juvenile recruitment in the population structure of Necora puber. Juveniles of N. puber were collected from the lower intertidal of rocky shores of Plymouth Sound (southwest coast of the UK) and monthly size–frequency distribution were used to determine the dynamics and the growth of the population. The parameters of the von Bertalanffy growth function were estimated (K=0.281 year⁻¹; t ₀=0.043; C=0.103; and t _s=0.268) assuming a L _∞=105 mm. Growth was markedly seasonal and present results indicated a slower juvenile growth rate than described previously for N. puber. The recruitment period was extensive and was two times higher in 2001 than in 2000 at the start of the 1+ year, but levelled off at the end of the 1+ year class on three of the four shores studied. Instantaneous mortality as high as 5.1 year⁻¹(99.4% year⁻¹) was observed during the higher recruitment year. Early juvenile mortality appears to be density dependent and a demographic bottleneck appears to limit the number of juveniles on some shores.     

The Surface Roughness of a Rubber Soling Material Determines the Coefficient of Friction on Water-Lubricated Surfaces

For more than a decade, evidence has been accumulating that points to the fact that the microscopic roughness of the footwear soling surface is a major determinant of slip-resistance on lubricated surfaces, but conclusive experimental proof has been lacking. This article describes an experiment in which five pairs of shoes were soled with the same rubber compound. Four of the pairs were abraded by different grades of grit to produce a range of roughness values. The coefficient of friction (CoF) of the five solings was then measured repeatedly by the walking traction method on wet surfaces including glazed wall tiles, vinyl asbestos coated with the wax floor polish, and both sides of a sheet of float glass. The Kruskal-Wallis statistical test proved beyond doubt that the soling roughness is a major factor in determining the CoF of this rubber soling material; p < 10⁻⁵. Nearly all of the grip was due to surface roughness of the soling material on these atypically smooth floors, although the surface roughness of the floors also had a significant effect on CoF; p < 0.003. Float glass is shown to be a promising reference floor material for the measurement of CoF of footwear; there was no statistical difference between results for the two sides of the glass sheet. Float glass could be used in the development of a standard CoF test method because new sheets of glass from the same manufacturer are identical and extremely smooth. The specification of CoF values for solings/floors combinations in lubricated conditions is of little value unless associated with roughness measurements and knowledge of how wear will affect the surface roughness of the sole. This article reports the first evidence that any specification of flooring by measuring CoF based on dry surfaces could lead to an increase in the number of injuries caused by slipping on the wet surfaces. Published by Elsevier Science Ltd     

A congener-specific PCDD/F emissions inventory for the UK: do current estimates account for the measured atmospheric burden?

Considerable effort has been expended in the UK and elsewhere to quantify and rank PCDD/F primary sources and emissions to the environment, principally the atmosphere, so that cost-effective source reduction measures can be taken. Here, we predict a congener-specific emissions inventory for primary and secondary nondioxin-regulated sources to the UK atmosphere, estimated to have ranged from 3 to 22 kg in 1996. The inventory profile is dominated by OCDD (approximately 30-40%), 1,2,3,4,6,7,8-HpCDD (approximately 15-19%) and 1,2,3,4,6,7,8-HpCDF (approximately 14-19%). Congeners 2,3,4,7,8-PeCDF and 1,2,3,7,8-PeCDD dominate the sigmaTEQ composition. Mass balance modelling suggests that the predicted congener pattern in UK air (based on the emission inventory) is similar to observed measurements, with absolute concentrations being estimated within a factor of 2 for most congeners. Calculations taking into account atmospheric weathering processes and long range (advective) transport suggest that PCDD/F sources to ambient air are primarily ongoing and that atmospheric mixing will mask individual emission source profiles/identities. This supports measured evidence for the consistency of PCDD/F air profiles observed around the UK throughout the year.