Study on the mechanical and environmental properties of concrete containing cathode ray tube glass aggregate

Cathode ray tube (CRT) glass is considered a hazardous material due to its lead toxicity. In addition, current disposal practices are being phased out due to their adverse environmental impacts. In this project, CRT glass was used as a fine aggregate replacement in concrete. Life-cycle material characterization was conducted by evaluating the durability and strength of the CRT-Concrete. Leaching tests were also conducted to investigate whether the material meets drinking water limits for Pb. Test results show that the plastic state of the CRT-Concrete was affected by the angularity of the glass particles. Moreover, the compressive strength of CRT-Concrete met and exceeded that of the control specimen. However, CRT-Concrete was susceptible to expansive alkali-silica reactions when more than 10% CRT replacement was used. Environmental leaching results show that lead concentrations from CRT-Concrete are below the drinking water limits depending on the CRT volume replacement and if biopolymers are used.     

Preparation and Properties of Biodegradable Foams

Foam extrusion of biodegradable polyester [poly(butylene adipate-co-terephthalate) (PBAT)] and its blends with maleated thermoplastic starch (MTPS) using a chemical blowing agent was performed. The effect of MTPS and percentage of chemical blowing agent on various foam properties is discussed. In general, an increased amount of PBAT in the foams improves the properties of the foams. The foam samples were characterized by measurements of density, expansion ratio, specific length, compressive strength, resiliency, moisture sorption, and imaging using digital light microscopy. Density, expansion ratio, and specific length measurements show that the best characteristics of lowest density, highest expansion ratio, and highest specific length are exhibited by the PBAT samples. The compressive strength and foam density exhibit a power-law relationship. Greater amounts of PBAT in the samples increase the resiliency and decrease the steady state weight gain during moisture sorption. All samples show regions of unfoamed material when only 3% chemical blowing agent is used, but when 5 and 7% chemical blowing agent is used, the samples exhibit cells throughout the matrix.     

Characterization of organics in aqueous effluents of coal conversion processes

High-resolution liquid chromatography is being applied to the characterization of refractory organic compounds present in coal conversion streams at concentrations as low as a few micrograms per liter. The chromatographic system, which was previously developed for the analysis of the molecular biochemical constituents in human body fluids, is capable of analyzing for compounds that are u.v.-absorbing and/or oxidizable with sulfatoceric acid. Aqueous samples from various coal-liquefaction experiments have been collected, concentrated when necessary, and chromatographed. The chromatographic fractions have then been subjected to a multiple-analytical identification procedure utilizing, in sequence, UV-spectrometry, gas chromatography, and mass spectrometry. With this procedure, 18 organics were identified and 15 were quantified in the effluent from the product scrubber of a bench-scale hydrocarbonization unit. In addition, numerous unknown constituents have been characterized with respect to gas chromatographic and mass spectrometric properties.     

Concentrations of decabromodiphenyl ether in air from Southern Ontario: implications for particle-bound transport

Atmospheric concentrations are reported for the main component of the brominated flame retardant decaBDE (BDE-209) in air samples collected from Southern Ontario for the period January 23-June 06, 2002. Levels ranged from below detection to 105pgm(-3) with virtually all of BDE-209 being trapped by the filter and thus deduced to be sorbed to aerosol particles. Thus, it is likely that the long-range atmospheric transport (LRAT) of BDE-209 is controlled by the transport characteristics of the aerosols. This conclusion that BDE-209 does not have the same potential for LRAT as other more volatile PBDEs is subject to possible complications arising from the uncertainties about the LRAT potential of aerosols.     

Microscale analytical methods for the quantitative detection of PCBs and PAHs in small tissue masses

Microscale methods (MM) were evaluated and compared to traditional methods (TM) for measuring polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) in spiked and standard reference fish and mussel tissues. MMs are advantageous because they use small tissue masses (ca. 100 mg), and maintain sensitivity through reducing final extract volume (traditionally 1 ml) by an order of magnitude or more (40 μl—PCBs; 100 μl—PAHs). Procedural losses occurred in the MMs’ combined cleanup/primary evaporation step (19% PAHs; 6% PCBs), and the final extract concentration (14% PAHs; 22% PCBs). The PAH MM performed comparably to the TM. Although most PCBs had recoveries >50%, the PCB MM generally yielded lower recoveries than the TM. Average method detection limits were 0.6 μg/kg (TM) and 1.0 μg/kg (MM) for PCBs and 25.7 μg/kg (TM) and 27.7 μg/kg (MM) for PAHs. MMs described for PCB and PAH tissue samples are potentially viable alternatives to TMs, and could lead to cost savings in bioaccumulation/toxicity tests.     

Air-vegetation transfer of PCDD/PCDFs: an assessment of field data and implications for modeling

This study was designed to evaluate soil and air (gas and particle) transfer of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) to vegetation in residential and industrial areas. In a first part, soil-vegetation transfer was assessed. The levels of PCDD/Fs in 120 soil and 120 herbage samples collected from 1996 to 2002 in an industrial area of Montcada (Barcelona, Spain), near a municipal solid waste incinerator (MSWI), were determined. Some additional individual samples were also evaluated. It was concluded that high soil concentrations, which are not at steady state with the air layer above it, show a tendency for PCDD/Fs to escape via volatilization. In a second part of the study, air-vegetation transfer was examined. PCDD/F concentrations from 24 herbage samples were used, while PCDD/F concentrations were also measured in seven high-volume air samples and seven passive air-vapor samples. Scavenging coefficients (m3 air "sampled"/g grass d.m.) ranged from 1.9 to 11.3 m3/g. A good trend with K(OA) was observed for PCDDs (R=0.82), while it was lower for PCDFs (R=0.55). The current results corroborate that PCDD/F concentrations in vegetation are associated with atmospheric deposition. For the highest substituted PCDD/F congeners, the air-particle uptake from plants is the principal pathway. In regions impacted by combustion emission sources, PCDD/F gas-particle partitioning is influenced by a higher concentration of particles in the air. Particles and associated particle-bound PCDD/Fs would sorb to leaf surfaces, and are subject to removal via wash off. However, in areas where emissions to air are not very notable, vapor absorption would be the principal source of vegetation pollution. The results of this investigation can have a potential interest in risk assessment studies and environmental fate models.     

Requirements of future models for inhabited areas

Models for inhabited areas are used in a variety of applications for accidental or continuous releases of radioactivity to atmosphere. Pathways of interest are external exposure from radioactive material in the cloud or deposited on indoor and outdoor surfaces and people, inhalation from the plume and from material resuspended from the ground. In developing a model for inhabited areas it is necessary to consider what the end users may need and ensure that the model is appropriate for the application; different levels of detail may be appropriate for different applications. This paper considers the main processes governing exposure in inhabited areas, commenting on the extent to which we understand them and how well current models reflect this understanding. It also identifies where the authors believe future modelling is needed and the key areas where the current inhabited area models could be improved.     

Size-assortative pairing across three developmental stages in the Zeus bug, Phoreticovelia disparata

The mechanisms underlying size-assortative pairing have received considerable attention. Typically, pairing is assumed to occur at, or just prior to, the adult phase of the life cycle. However, in many invertebrates, males commence associations with juvenile females who are more than a single moult away from sexual maturity. These species are ideal to explore the importance of reproductive and survival benefits as mechanisms driving size-assortative pairing. In the Zeus bug, Phoreticovelia disparata, adult males are found riding on juvenile (fourth and fifth instar) and adult females—a behaviour that is costly for females but has survival benefits for males. Using a combination of field collections and laboratory manipulations, we show that pairing is size-assortative both within and between female age classes and that riding males are smaller than non-riding males. In a series of mating trials, we revealed that males attempt to ride any female but that their riding success is dependent on female age. We also provide the first direct evidence of female resistance to male riding attempts in P. disparata. We propose that size-assortative pairing arises through adaptations that have evolved to minimise the potential costs of sexual conflict. We suggest that the selective pressure on males to maximise survival benefits is sufficiently high that it outweighs the reproductive benefits of discriminating against fourth instar females. Finally, given that female resistance is under direct selection in juvenile females, it is likely to be the main form of selective pressure for adult females.