Comparison of different modifications on QuEChERS sample preparation method for PAHs determination in black, green, red and white tea

The aim of this work was the evaluation of QuEChERS extraction method for polycyclic aromatic hydrocarbon (PAH) determination in various types of tea. In the experiment, different kinds of extraction solvents, sorbents and a final method of sample preparation were compared. The final extracts were analysed by gas chromatography-selected ion monitoring-mass spectrometry. The results suggest that acetonitrile extraction, clean up with SAX and final liquid–liquid extraction was the best combination giving the most purified extracts and acceptable compound recoveries for different types of teas. In the study of real samples, compounds belonging to light PAHs were mostly detected, and heavy polycyclic aromatic hydrocarbons, including benzo[a]pyrene, were not identified in any of samples.     

Direct N2O emission from agricultural soils in Poland between 1960 and 2009

Nitrogen fertilization (N) is commonly known as a main source of direct nitrous oxide (N₂O) emission from agricultural soils. An area of 38 % of the total land surface of Poland was covered by agricultural soils in 2009. In this paper, we aimed at analyzing data regarding the land exploitation for 13 selected subareas of Poland between 1960 and 2009. Seven out of the 13 subareas studied are located in the West (area A), and six subareas are located in southeast of Poland (area B). The total area covered by large farms (>20 ha) differed largely, between area A (10.6 %) and area B (0.9 %) in 2009. Both areas varied in terms of the amount of fertilizers used annually, average crop yield and crop structure. Average direct emissions of N₂O from agricultural soils were 1.66 ± 0.09 kg N₂O–N ha^?1 a^?1 for area A, 1.39 ± 0.07 kg N₂O–N ha^?1 a^?1 for area B and 1.46 ± 0.07 kg N₂O–N ha^?1 a^?1 for the whole country between 1960 and 2009.     

Photocatalytic decomposition of methanol over La/TiO<Subscript>2</Subscript> materials

Lanthanum-modified TiO₂ photocatalysts (0.2–1.5 wt% La) were investigated in the methanol decomposition in an aqueous solution. The photocatalysts were prepared by the common sol-gel method followed by calcination. The structural (X-ray diffraction, Raman, X-ray photoelectron spectroscopy), textural (N₂ physisorption), and optical properties (diffuse reflectance spectroscopy, photoelectrochemical measurements) of all synthetized nanomaterials were correlated with photocatalytic activity. Both pure TiO₂ and La-doped TiO₂ photocatalysts proved higher yields of hydrogen in comparison to photolysis. The photocatalyst with optimal amount of lanthanum (0.2 wt% La) showed almost two times higher amount of hydrogen produced at the same time as in the presence of pure TiO₂. The photocatalytic activity increased with both increasing photocurrent response and decreasing amount of lattice and surface O species. It has been shown that both direct and indirect mechanisms of methanol photocatalytic oxidation participate in the production of hydrogen. Both direct and indirect mechanisms take part in the formation of hydrogen.     

Cyanides in the environment—analysis—problems and challenges

Cyanide toxicity and their environmental impact are well known. Nevertheless, they are still used in the mining, galvanic and chemical industries. As a result of industrial activities, cyanides are released in various forms to all elements of the environment. In a natural environment, cyanide exists as cyanogenic glycosides in plants seeds. Too much consumption can cause unpleasant side effects. However, environmental tobacco smoke (ETS) is the most common source of cyanide. Live organisms have the ability to convert cyanide into less toxic compounds excreted with physiological fluids. The aim of this paper is to review the current state of knowledge on the behaviour of cyanide in the environment and its impact on the health and human life.     

Application of FT-Raman spectroscopy for in situ detection of microorganisms on the surface of textiles

In this work we present the usefulness of FT-Raman spectroscopy for microbiological analysis of textiles. This technique was used for non-destructive identification of Escherichia coli bacteria on cotton and polyester fabrics. It was possible to discriminate between infected and non-infected materials. Moreover, this technique allowed detection of detergent traces as well as investigation of the influence of microorganisms on different textiles. Raman analysis supported by chemometrics (cluster analysis and principal component analysis) was shown to be a method for identification of textiles with inoculum of microorganisms in a short time. The results can be potentially used in the fabric industry and related areas.     

The application of an open tubular trap in analysis of organic air pollutants

The paper presents the studies on equilibrium trapping of organic air pollutants. A piece of a commercial capillary chromatographic column coated with polydimethylsiloxane was used for trapping. This kind of the trap was applied for sampling and enrichment of selected volatile nonpolar organic compounds from workplace atmosphere (woodworking shop). In the method developed, which is based on equilibrium trapping the concentration of analytes in a studied medium can be calculated from the partition coefficients determined in a calibration step and the amount of particular analytes trapped. Simultaneously with equilibrium trapping, analytes were sampled into sorbent packed tubes. The concentrations of analytes in woodworking shop atmosphere obtained with both sampling methods (equilibrium and dynamic) were in good agreement.     

Trace element contamination in industrial regions of Poland studied by moss monitoring

The use of terrestrial mosses as biomonitors in large-scalemulti-element studies of heavy metal deposition from theatmosphere is a well established technique in Europe. Insuch studies it is advantageous to determine as many elements as possible in order to distinguish betweendifferent source categories. A combination of INAA and AAShas been found very useful in this respect, in particularwhen epithermal activation is used for instrumental neutronactivation analysis. A total of 33 elements (Al, Cl, Sc, V,Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Ag, Cd, Sb,I, Cs, Ba, La, Ce, Tb, Yb, Hf, Ta, W, Au, Pb, Th, and U) inPleurozium schreberi (Brid.) Mitt. moss samples fromthe Silesia-Kraków Industrial Region and Legnica-GogówCopper Basin and from the control (background) area inNortheast Poland were identified. The highest concentrationsof the majority of trace elements were found in mossesgrowing in the Silesia-Kraków Industrial Region, only Cu andAs concentrations were higher in mosses in the Legnica-Gogów Copper Basin. These results are in conformity withthe load of trace elements emissions in these areas.     

Selective removal of the heavy metal ions from waters and industrial wastewaters by ion-exchange method

By ion exchange undesirable ions are replaced by others which don't contribute to contamination of the environment. The method is technologically simple and enables efficient removal of even traces of impurities from solutions. Examples of selective removal of heavy metal ions by ion-exchange are presented. They include removal of Pb(II), Hg(II), Cd(II), Ni(II), V(IV,V), Cr(III,VI), Cu(II) and Zn(II) from water and industrial wastewaters by means various modern types of ion exchangers.     

Removal possibilities of colloidal chromium (III) oxide from water using polyacrylic acid

The lack of water is the most serious threat to humanity that leads to more efficient water and sewage treatment. Currently, many scientists are looking for new coagulants, flocculants and physicochemical methods allowing for sufficient removal of pollutants from water. The presence of various types of pigments, including chromium (III) oxide, poses the major problem. Even small amounts of these substances inhibit life processes in water. In this paper, the stability of Cr₂O₃ suspension in the absence and the presence of polyacrylic acid (PAA) was determined. To explain the changes in the system stability, the adsorption and electrokinetic measurements were performed. The chromium (III) oxide suspension not containing PAA is the most stable at pH?=?3. Under these conditions, each positively charged solid particle is surrounded by a negatively charged diffusion layer which protects from particle collision and aggregates formation (electrostatic stabilization). In turn, the Cr₂O₃ suspension containing the PAA is most unstable also at pH?=?3. In this case, the polymer causes destabilization of the colloidal suspension, which results from charge neutralization of solid particles by adsorbed PAA.