Environmental evaluation for workplace violence in healthcare and social services

PROBLEM: Federal policy recommends environmental strategies as part of a comprehensive workplace violence program in healthcare and social services. The purpose of this project was to contribute specific, evidence-based guidance to the healthcare and social services employer communities regarding the use of environmental design to prevent violence. METHOD: A retrospective record review was conducted of environmental evaluations that were performed by an architect in two Participatory Action Research (PAR) projects for workplace violence prevention in 2000 and, in the second project in 2005. Ten facility environmental evaluation reports along with staff focus group reports from these facilities were analyzed to categorize environmental risk factors for Type II workplace violence. RESULTS: Findings were grouped according to their impact on access control, the ability to observe patients (natural surveillance), patient and worker safety (territoriality), and activity support. DISCUSSION: The environmental assessment findings reveal design and security issues that, if corrected, would improve safety and security of staff, patients, and visitors and reduce fear and unpredictability. IMPACT ON INDUSTRY: Healthcare and social assistance employers can improve the effectiveness of violence prevention efforts by including an environmental assessment with complementary hazard controls.     

Repellent scent-marking of flowers by a guild of foraging bumblebees (Bombus spp.)

We have found that foraging bumblebees (Bombus hortorum, B. pascuorum, B. pratorum and B.␣terrestris) not only avoid flowers of Symphytum officinale that have recently been visited by conspecifics but also those that have been recently visited by heterospecifics. We propose that the decision whether to reject or accept a flower is influenced by a chemical odour that is left on the corolla by a forager, which temporarily repels subsequent foragers. Honeybees and carpenter bees have previously been shown to use similar repellent forage-marking scents. We found that flowers were repellent to other bumblebee foragers for approximately 20 min and also that after this time nectar levels in S. officinale flowers had largely replenished. Thus bumblebees could forage more efficiently by avoiding flowers with low rewards. Flowers to which extracts of tarsal components were applied were more often rejected by wild B. terrestris workers than flowers that had head extracts applied, which in turn were more often rejected than flowers that had body extracts applied. Extracts from four Bombus species were equally repellent to foragers. The sites of production of the repellent scent and its evolutionary origins are discussed. Received: 24 November 1997 / Accepted after revision: 8 March 1998     

Storage stability of injection-molded starch-zein plastics under dry and humid conditions

Corn starch and zein mixtures (4 : 1 dry weight) were extruded and injection-molded in the presence of plasticizers (glycerol and water). Tensile strength and percentage elongation of the molded plastics were measured before and after 1 week of storage under a dry or humid condition (11 or 93% RH). With 10–12% glycerol and 6–8% water, injection-molded plastics had relatively good tensile properties (20- to 25-MPa tensile strength and 3.5–4.7% elongation). But while exposed to dry conditions (11% RH), the molded plastics lost weight (0.5–1.5% in 7 days) and became very brittle, with significant decreases in tensile strength and elongation. Partial replacement (5–10%) of starch with a maltodextrin (average DE 5) reduced the glass transition and melting temperatures of the starch-zein mixture as well as the dry storage stability. Using potato starch instead of corn starch significantly improved the dry storage stability of the injection-molded starch-zein plastics (18- vs 11-MPa tensile strength). Anionic corn starches with a maleate or succinate group (DS<0.01) produced injection-molded plastics with improved tensile properties and storage stability. Plastics prepared from the starch maleate and zein mixture retained the strength during 1 week of dry storage without a significant change (26-MPa tensile strength and 3.7% elongation after 1 week of storage).Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Journal paper No. J-15561 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa, Project No. 2863.     

Biodegradable plastic made from soybean products. II. Effects of cross-linking and cellulose incorporation on mechanical properties and water absorption

Soy isolate was treated with formaldehyde and glyoxal at 1.0, 2.5, and 5.0% (w/w isolate) and with adipic and acetic anhydrides. The materials were then compression-molded into plastic tensile bars and tested for tensile and yield strength, percentage elongation, Young's modulus, and water absorption. Treatment with 5% formaldehyde increased the tensile strength significantly, to 4.9 kg/mm², compared with the untreated sample (3.7 kg/mm²). The yield strength increased slightly, to 0.68 kg/mm². Elongation was significantly less after treatment with formaldehyde. Young's modulus increased after treatment and leveled off at 174 kg/mm². Water absorption decreased as the formaldehyde concentration increased. Treatment with either glyoxal or adipic/acetic anhydride had a detrimental effect on the mechanical properties of the plastic specimens. Water absorption was decreased by glyoxal treatment but was not affected by adipic/acetic anhydride treatment. Long-fiber (lf), short-fiber (sf), and microcrystalline (mc) cellulose were incorporated into soy isolate at various levels. Cellulose addition decreased the percentage elongation and increased the rigidity of the plastic. All three cellulose additions increased Young's modulus. The tensile strength increased with the addition of sf-cellulose to soy isolate; lf-cellulose decreased the tensile strength, whereas the incorporation of mc-cellulose did not have a significant effect. The yield strength increased slightly with the addition of sf-cellulose and was less affected by the addition of lf- or mc-cellulose. All three types of cellulose slightly decreased water absorption at ca. 15% content.Journal Paper No. J-15563 of the Iowa Agriculture and Home Economics Experiment Station, Ames; Project No. 2863.     

Liquid household hazardous wastes in the United States: Identification,disposal, and management plan

Present methods of disposal of today's hazardous household chemicals in the United States are frequently not acceptable because of pathways to groundwater, surface water, and the atmosphere. This report identifies potentially hazardous liquid waste in the household, notes current disposal practices, and recommends an improved management plan that utilizes consumer education, manufacturer cooperation, and governmental intervention. Laws requiring uniform disposal labeling on packaging are critical. Local, county, and state governments must be encouraged to coordinate the necessary infrastructure. Managing hazardous household wastes now will mitigate potential disposal problems.     

Where is the line between benign and invasive? An examination of psychological barriers to the acceptance of awareness monitoring systems

As employees find themselves in geographically separated teams, the loss of face‐to‐face interaction has led to the development of new monitoring technologies that provide availability information for enhancing collaboration. Drawing on diverse literatures in electronic performance monitoring, computer supported cooperative work, privacy, and fairness, a comprehensive theoretical model of monitoring acceptance was developed to examine the effects of being monitored for availability. In the first study, over 600 employees from a large number of organizations responded to one of a variety of monitoring system characteristics. Although the model found strong support overall, results suggest that technical solutions, such as manipulating the characteristics of the awareness system, are not sufficient to ensure fairness and privacy. A second, focus group study, adds support for the theoretical model and provides an explanation for these quantitative results concerning system characteristics. Specifically, the qualitative evidence suggests that these systems can invade employees' psychological barriers ‐ and thus manipulating the technology will only have small effects on fairness and privacy because the technology has already crossed the line from benign to invasive. The paper concludes by presenting theoretical and practical implications for the consideration of psychological boundaries in the design and use of ubiquitous monitoring and communication technologies. Copyright © 2002 John Wiley & Sons, Ltd.     

Landscape metrics and estuarine sediment contamination in the mid-Atlantic and southern New England regions

In a previously published study, quantitative relationships were developed between landscape metrics and sediment contamination for 25 small estuarine systems within Chesapeake Bay. These analyses have been extended to include 75 small estuarine systems across the mid-Atlantic and southern New England regions of the USA. Because of the different characteristics and dynamics of the estuaries across these regions, adjustment for differing hydrology, sediment characteristics, and sediment origins were included in the analysis. Multiple linear regression with stepwise selection was used to develop statistical models for sediment metals, organics, and total polycyclic aromatic hydrocarbons (PAHs). The landscape metrics important for explaining the variation in sediment metals levels (R2 = 0.72) were the percent area of nonforested wetlands (negative contribution), percent area of urban land, and point source effluent volume and metals input (positive contributions). The metrics important for sediment organics levels (R2 = 0.5) and total PAHs (R2 = 0.46) were percent area of urban land (positive contribution) and percent area of nonforested wetlands (negative contribution). These models included silt-clay content (metals) or total organic C (organics, total PAHs) of sediments and grouping by estuarine hydrology, suggesting the importance of sediment characteristics and hydrology in mitigating the influence of the landscape metrics on sediment contamination levels. The overall results from this study are indicative of how statistical models can be developed relating landscape metrics to estuarine sediment contamination for distributions of land cover and point source discharges.     

Snowmobile impact on old field and marsh vegetation in Nova Scotia,Canada: An experimental study

A study was carried out in Nova Scotia, Canada, to experimentally assess the effect of snowmobiles on old field and marsh vegetation. Snowmobile treatments ranging from a single pass to 25 passes (five passes on five separate days) were administered. The first pass by a snowmobile caused the greatest increase in snow compaction-roughly 75% of that observed after five sequential passes. Snowmobile treatment resulted in highly significant increases in snow retention in spring. Frequency was more important than intensity in this regard.Standing crop and species composition were measured the following summer. Standing crop in the field showed a significant reduction with increasing snowmobile use; frequency of treatment (p < 0.01) was more important than intensity (p = 0.125).Stellaria graminea, Aster cordifolius, Ranunculus repens, andEquisetum arvense all showed significant (p < 0.05) differences in percent cover resulting from the treatment. Marginally significant changes were observed inAgrostis tenuis andPhleum pratense Marsh vegetation showed no significant effects of snowmobile treatment. This may have been because of solid ice cover during the winter.The literature is critically reviewed. It is concluded that snowmobile use can have a highly significant effect upon natural vegetation. Management suggestions are made.