A method for determining the analytical form of a radionuclide depth distribution using multiple gamma spectrometry measurements

When characterizing environmental radioactivity, whether in the soil or within concrete building structures undergoing remediation or decommissioning, it is highly desirable to know the radionuclide depth distribution. This is typically modeled using continuous analytical expressions, whose forms are believed to best represent the true source distributions. In situ gamma ray spectroscopic measurements are combined with these models to fully describe the source. Currently, the choice of analytical expressions is based upon prior experimental core sampling results at similar locations, any known site history, or radionuclide transport models. This paper presents a method, employing multiple in situ measurements at a single site, for determining the analytical form that best represents the true depth distribution present. The measurements can be made using a variety of geometries, each of which has a different sensitivity variation with source spatial distribution. Using non-linear least squares numerical optimization methods, the results can be fit to a collection of analytical models and the parameters of each model determined. The analytical expression that results in the fit with the lowest residual is selected as the most accurate representation. A cursory examination is made of the effects of measurement errors on the method.     

Storage stability of injection-molded starch-zein plastics under dry and humid conditions

Corn starch and zein mixtures (4 : 1 dry weight) were extruded and injection-molded in the presence of plasticizers (glycerol and water). Tensile strength and percentage elongation of the molded plastics were measured before and after 1 week of storage under a dry or humid condition (11 or 93% RH). With 10–12% glycerol and 6–8% water, injection-molded plastics had relatively good tensile properties (20- to 25-MPa tensile strength and 3.5–4.7% elongation). But while exposed to dry conditions (11% RH), the molded plastics lost weight (0.5–1.5% in 7 days) and became very brittle, with significant decreases in tensile strength and elongation. Partial replacement (5–10%) of starch with a maltodextrin (average DE 5) reduced the glass transition and melting temperatures of the starch-zein mixture as well as the dry storage stability. Using potato starch instead of corn starch significantly improved the dry storage stability of the injection-molded starch-zein plastics (18- vs 11-MPa tensile strength). Anionic corn starches with a maleate or succinate group (DS<0.01) produced injection-molded plastics with improved tensile properties and storage stability. Plastics prepared from the starch maleate and zein mixture retained the strength during 1 week of dry storage without a significant change (26-MPa tensile strength and 3.7% elongation after 1 week of storage).Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Journal paper No. J-15561 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa, Project No. 2863.     

Biodegradable plastic made from soybean products. II. Effects of cross-linking and cellulose incorporation on mechanical properties and water absorption

Soy isolate was treated with formaldehyde and glyoxal at 1.0, 2.5, and 5.0% (w/w isolate) and with adipic and acetic anhydrides. The materials were then compression-molded into plastic tensile bars and tested for tensile and yield strength, percentage elongation, Young's modulus, and water absorption. Treatment with 5% formaldehyde increased the tensile strength significantly, to 4.9 kg/mm², compared with the untreated sample (3.7 kg/mm²). The yield strength increased slightly, to 0.68 kg/mm². Elongation was significantly less after treatment with formaldehyde. Young's modulus increased after treatment and leveled off at 174 kg/mm². Water absorption decreased as the formaldehyde concentration increased. Treatment with either glyoxal or adipic/acetic anhydride had a detrimental effect on the mechanical properties of the plastic specimens. Water absorption was decreased by glyoxal treatment but was not affected by adipic/acetic anhydride treatment. Long-fiber (lf), short-fiber (sf), and microcrystalline (mc) cellulose were incorporated into soy isolate at various levels. Cellulose addition decreased the percentage elongation and increased the rigidity of the plastic. All three cellulose additions increased Young's modulus. The tensile strength increased with the addition of sf-cellulose to soy isolate; lf-cellulose decreased the tensile strength, whereas the incorporation of mc-cellulose did not have a significant effect. The yield strength increased slightly with the addition of sf-cellulose and was less affected by the addition of lf- or mc-cellulose. All three types of cellulose slightly decreased water absorption at ca. 15% content.Journal Paper No. J-15563 of the Iowa Agriculture and Home Economics Experiment Station, Ames; Project No. 2863.     

Liquid household hazardous wastes in the United States: Identification,disposal, and management plan

Present methods of disposal of today's hazardous household chemicals in the United States are frequently not acceptable because of pathways to groundwater, surface water, and the atmosphere. This report identifies potentially hazardous liquid waste in the household, notes current disposal practices, and recommends an improved management plan that utilizes consumer education, manufacturer cooperation, and governmental intervention. Laws requiring uniform disposal labeling on packaging are critical. Local, county, and state governments must be encouraged to coordinate the necessary infrastructure. Managing hazardous household wastes now will mitigate potential disposal problems.     

Where is the line between benign and invasive? An examination of psychological barriers to the acceptance of awareness monitoring systems

As employees find themselves in geographically separated teams, the loss of face‐to‐face interaction has led to the development of new monitoring technologies that provide availability information for enhancing collaboration. Drawing on diverse literatures in electronic performance monitoring, computer supported cooperative work, privacy, and fairness, a comprehensive theoretical model of monitoring acceptance was developed to examine the effects of being monitored for availability. In the first study, over 600 employees from a large number of organizations responded to one of a variety of monitoring system characteristics. Although the model found strong support overall, results suggest that technical solutions, such as manipulating the characteristics of the awareness system, are not sufficient to ensure fairness and privacy. A second, focus group study, adds support for the theoretical model and provides an explanation for these quantitative results concerning system characteristics. Specifically, the qualitative evidence suggests that these systems can invade employees' psychological barriers ‐ and thus manipulating the technology will only have small effects on fairness and privacy because the technology has already crossed the line from benign to invasive. The paper concludes by presenting theoretical and practical implications for the consideration of psychological boundaries in the design and use of ubiquitous monitoring and communication technologies. Copyright © 2002 John Wiley & Sons, Ltd.     

Mine-drainage treatment wetland as habitat for herptofaunal wildlife

Land reclamation techniques that incorporate habitat features for herptofaunal wildlife have received little attention. We assessed the suitability of a wetland, constructed for the treatment of mine-water drainage, for supporting herptofaunal wildlife from 1988 through 1990 using diurnal and nocturnal surveys. Natural wetlands within the surrounding watershed were also monitored for comparison. The treatment wetland supported the greatest abundance and species richness of herptofauna among the sites surveyed. Abundance was a function of the frog density, particularly green frogs (Rana clamitans) and pickerel frogs (R. palustris), while species richness was due to the number of snake species found. The rich mix of snake species present at the treatment wetland was believed due to a combination of an abundant frog prey base and an amply supply of den sites in rock debris left behind from earlier surface-mining activities. Nocturnal surveys of breeding male frogs demonstrated highest breeding activity at the treatment wetland, particularly for spring peepers (Hyla crucifer). Whole-body assays of green frog and bullfrog (R. catesbeiana) tissues showed no differences among sites in uptake of iron, aluminum, and zinc; managanese levels in samples from the treatment wetland were significantly lower than those from natural wetlands. These results suggest that wetlands established for water quality improvement can provide habitat for reptiles and amphibians, with the species composition dependent on the construction design, the proximity to source populations, and the degree of acidity and heavy-metal concentrations in drainage waters.     

Landscape metrics and estuarine sediment contamination in the mid-Atlantic and southern New England regions

In a previously published study, quantitative relationships were developed between landscape metrics and sediment contamination for 25 small estuarine systems within Chesapeake Bay. These analyses have been extended to include 75 small estuarine systems across the mid-Atlantic and southern New England regions of the USA. Because of the different characteristics and dynamics of the estuaries across these regions, adjustment for differing hydrology, sediment characteristics, and sediment origins were included in the analysis. Multiple linear regression with stepwise selection was used to develop statistical models for sediment metals, organics, and total polycyclic aromatic hydrocarbons (PAHs). The landscape metrics important for explaining the variation in sediment metals levels (R2 = 0.72) were the percent area of nonforested wetlands (negative contribution), percent area of urban land, and point source effluent volume and metals input (positive contributions). The metrics important for sediment organics levels (R2 = 0.5) and total PAHs (R2 = 0.46) were percent area of urban land (positive contribution) and percent area of nonforested wetlands (negative contribution). These models included silt-clay content (metals) or total organic C (organics, total PAHs) of sediments and grouping by estuarine hydrology, suggesting the importance of sediment characteristics and hydrology in mitigating the influence of the landscape metrics on sediment contamination levels. The overall results from this study are indicative of how statistical models can be developed relating landscape metrics to estuarine sediment contamination for distributions of land cover and point source discharges.     

Aliphatic hydrocarbons and polycyclic aromatic hydrocarbons (PAHs) in sediments collected from the 110 mile hole and along a transect from 58 degrees 58.32'N 1 degree 10.38'W to the inner Moray Firth,Scotland

Sediments were collected from the 110 mile hole and along a transect from 58 degrees 58.32' N 1 degree 10.38' W to the UK National Marine Monitoring (NMMP) site in the inner Moray Firth, for determination of hydrocarbon concentration and composition. Total PAH concentrations (2- to 6-ring PAHs, parent and branched) were highest at NMMP site 95 and at the associated end of the transect in the inner Moray Firth. PAHs in this area were of predominately pyrolytic origin and could be attributed to urban and industrial activities. The majority of sediments collected in the middle section of the transect had low total PAH concentrations (< 100 ng g(-1) dry weight). The high proportion of naphthalenes and alkylated PAHs in this area suggested a predominately petrogenic input. The GC-FID aliphatic hydrocarbon profiles showed that the majority of sediments, including those in the inner Firth, had a limited petrogenic input. This was supported by the geochemical biomarker profiles, which contained triterpanes typical of Middle Eastern crude oil. Principal component analysis was used to investigate spatial trends in the PAH distributions and demonstrated that there were differences between areas. The NMMP site 95 and transect start and middle sediments were well separated. PCA further confirmed that sediments from the NMMP site 95, the 110 mile hole and the inner Moray Firth (south west) end of the transect contained PAHs from predominately pyrolytic sources, whereas sediments from the north east end (start) and the middle of the transect were typified by a greater petrogenic component.     

The relationship between microbial carbon and the resource quality of soil carbon

The biological health of soil is an important aspect of soil quality because of the many critical functions performed by organisms in soil. Various indicators of soil quality have been proposed, but measurements of microbial biomass are most commonly used. During decomposition of plant residues in soil the relative intensities of the O-alkyl-C signal decreases and the alkyl-C signal increases in nuclear magnetic resonance (NMR) spectra. This leads to the suggestion that the alkyl-C to O-alkyl-C ratio of a soil may indicate the degree of decomposition. Consequently, the overall resource quality of soil C as a substrate for heterotrophic microorganisms may be inversely related to the alkyl-C to O-alkyl-C ratio. Our hypothesis is that a relationship exists between the size of the soil microbial community (microbial biomass) and the quality of soil carbon as a resource for microorganisms. New data have been combined with previously published data to show that there was a significant, negative correlation between the biomass C to total C (Cmic, to Corg) ratio and the alkyl-C to O-alkyl-C ratio (p < 0.01), which supports our hypothesis.     

Snowmobile impact on old field and marsh vegetation in Nova Scotia,Canada: An experimental study

A study was carried out in Nova Scotia, Canada, to experimentally assess the effect of snowmobiles on old field and marsh vegetation. Snowmobile treatments ranging from a single pass to 25 passes (five passes on five separate days) were administered. The first pass by a snowmobile caused the greatest increase in snow compaction-roughly 75% of that observed after five sequential passes. Snowmobile treatment resulted in highly significant increases in snow retention in spring. Frequency was more important than intensity in this regard.Standing crop and species composition were measured the following summer. Standing crop in the field showed a significant reduction with increasing snowmobile use; frequency of treatment (p < 0.01) was more important than intensity (p = 0.125).Stellaria graminea, Aster cordifolius, Ranunculus repens, andEquisetum arvense all showed significant (p < 0.05) differences in percent cover resulting from the treatment. Marginally significant changes were observed inAgrostis tenuis andPhleum pratense Marsh vegetation showed no significant effects of snowmobile treatment. This may have been because of solid ice cover during the winter.The literature is critically reviewed. It is concluded that snowmobile use can have a highly significant effect upon natural vegetation. Management suggestions are made.