Effect of condensing cavity on the performance of a passive solar desalination system: an experimental study

Environmental Science and Pollution Research - In this study, the effects of adding a condensing cavity in a passive single-basin solar still are investigated experimentally under the climate...     

Synthesis and optimization of spherical nZVI (20–60 nm) immobilized in bio-apatite-based material for efficient removal of phosphate: Box-Behnken design in a fixed-bed column

In the present study, bio-apatite/nZVI composite was synthesized through Fe(III) reduction with sodium borohydride and was fully characterized by FTIR, XRD, SEM–EDX, TEM, BET, BJH, and pH_PZC. Column experiments were carried out for the removal of phosphate as a function of four operational parameters including initial phosphate concentration (100–200 mg L^?1), initial solution pH (2–9), bed height (2–6 cm), and influent flow rate (2.5–7.5 mL min^?1) using a response surface methodology (RSM) coupled with Box-Behnken design (BBD). 2D contour and 3D surface plots were employed to analyze the interactive effects of the four operating parameters on the column performance (e.g., uptake capacity and saturation time). According to ANOVA analysis, the influent flow rate and bed height are the most important factor on phosphate uptake capacity and saturation time, respectively. A quadratic polynomial model was excellently fitted to experimental data with a high coefficient of determination (>?0.96). The RSM-BBD model predicted maximum phosphate adsorption capacity of 85.71 mg g^?1 with the desirability of 0.995 under the optimal conditions of 135.35 mg L^?1, 2, 2 cm, and 7.5 mL min^?1 for initial phosphate concentration, initial solution pH, bed height, and influent flow rate, respectively. The XRD analysis demonstrated that the reaction product between bio-apatite/nZVI composite and phosphate anions was Fe₃ (PO₄)₂. 8H₂O (vivianite). The suggested adsorbent can be effectively employed up to five fixed-bed adsorption–desorption cycles and was also implemented to adsorb phosphate from real samples.

     

A systematic review on cigarette butt management as a hazardous waste and prevalent litter: control and recycling

Annually, over 5.5 trillion cigarettes are produced worldwide, and it is estimated that 4.5 trillion cigarette butts (CBs) are still being littered in the world. The dispersal of the CBs has caused this hazardous waste to be considered as one of the most important litters and environmental risks all over the world. This systematic study with the search protocol definition and keyword identification was developed to find the CBs control and recycling methods by searching in five scientific databases. Founded articles were monitored and finally, 35 related articles were selected and studied by the authors. The results of this study showed that CBs recycling methods have been tested in 10 specific categories all over the world. The CBs have been applied without any pre-processing methods in the bricks and asphalt production. However, other applications of the CBs such as the absorbent material production, vector control, and use as a biofilm carrier in wastewater treatment need various processing methods. The researchers also presented models and suggestions such as taxes, penalties, and public education for the control of CBs littering. Despite the innovative methods applied for the CBs recycling in previous studies, CBs have not received much attention in terms of pollutant control and environmental issues in recycling processes.

     

Larvicidal,repellent, and histopathologic effects of Citrullus colocynthis against the malaria vector

Abstract

This research is conducted to determine the larvicidal, repellent and pathological effects of fruit extracts of C. colocynthis on malaria vector mosquito, Anopheles stephensi Liston, 1901. The fruit water and ethanol extract of C. colocynthis were concentrated for larvicidal and repellent activities on human volunteer against An. stephensi. The temephos larvicide was tested as the positive control. A concentration of 300?mg/L had full-scale mortality and the most toxic effect. The LC₅₀ and LC₉₀ values of C. colocynthis water and ethanol extracts were 180and 283?mg/L, respectively. The LC₅₀ and LC₉₀ values of temephos were 0.2706 and 1.6932?mg/L, respectively. The ED₅₀ and ED₉₀ values of the plant extract were 0.2 and 1.3?mg/cm², respectively. Thin sections from treated larvae exhibited gross histopathologic effects of C. colocynthis fruit extracts on gut epithelial cell layer by vacuolization of foregut cuboidal and midgut columnar cells. This study suggested that the fruit extracts of C. colocynthis had significant larvicidal and repellent activity to be used as an ideal approach to control the malaria vector mosquito.     

Bioremediation treatment of hydrocarbon-contaminated Arctic soils: influencing parameters

The Arctic environment is very vulnerable and sensitive to hydrocarbon pollutants. Soil bioremediation is attracting interest as a promising and cost-effective clean-up and soil decontamination technology in the Arctic regions. However, remoteness, lack of appropriate infrastructure, the harsh climatic conditions in the Arctic and some physical and chemical properties of Arctic soils may reduce the performance and limit the application of this technology. Therefore, understanding the weaknesses and bottlenecks in the treatment plans, identifying their associated hazards, and providing precautionary measures are essential to improve the overall efficiency and performance of a bioremediation strategy. The aim of this paper is to review the bioremediation techniques and strategies using microorganisms for treatment of hydrocarbon-contaminated Arctic soils. It takes account of Arctic operational conditions and discusses the factors influencing the performance of a bioremediation treatment plan. Preliminary hazard analysis is used as a technique to identify and assess the hazards that threaten the reliability and maintainability of a bioremediation treatment technology. Some key parameters with regard to the feasibility of the suggested preventive/corrective measures are described as well.     

Analyzing the factors affecting environmental risks of projects using a hybrid approach of DEMATEL‐ANP,artificial neural network: A case study

The increasing growth of the economy in each country necessitates a great amount of investment in infrastructure. The belief that projects involve various uncertainties, such as technical skills, management quality, and the like, indicates that most projects fail to achieve their aims, interests, costs, as well as their timeframes and space requirements. As the environment can pose significant uncertainty to any project, environmental risks should be deeply studied by project management departments. This study intends to analyze as a case the environmental risk management system within a consulting firm. From this analysis, each aspect of a project's environmental risk management is ranked using a fuzzy analytical network process (ANP), a neural network algorithm, and a decision‐making trial and evaluation laboratory (DEMATEL) methodology. From the organizational aspect, budget risk is the most significant. From the technical aspect, the risk of regulations is the most important one. Finally, the risk of project failure from poor communication is another identified main risk in this research. By studying high‐ranking items in this hierarchy, it can be understood that these criteria exist in different aspects; therefore, all aspects of the risk should be taken into account to cover and assess risk. A neural network algorithm for validating and reassessment of ranking is employed. Results of this application showed that, based on Spearman's rank correlation method, two different approaches resulted in similar rankings. Finally, some practical implications for responding to the most highly ranked risks are proposed.     

Relationships between certain individual characteristics and occupational accidents

Background. Work accidents and injuries are an occupational health and safety problem. Methods. This cross-sectional study was conducted for 404 frontline workers who were randomly selected from the Arya Sasol Petrochemical Company in Bushehr, Iran, during 2016. A statistical analysis was performed using the χ² test and the logistic regression model with SPSS version 18. Results. The overall occupational accident rate among the participants was found to be 9.2%. Statistically significant differences were observed for body mass index, education, job experience, smoking habit, consumption of sedative pills and presence of sleep disorders. Three factors had significant adjusted odds ratios (ORs): body mass index (OR 2.41, 95% confidence interval [CI] [1.16, 5.04]), education (OR 0.25, 95% CI [0.07, 0.85]) and job experience (OR 0.29, 95% CI [0.15, 0.57]). Conclusions. Preventive programs should be implemented for industrial workers, especially young workers, workers who smoke, overweight workers and workers with psychosomatic disease.     

The potential use of ultrasound-assisted bleaching in removing heavy metals and pigments from soybean oil using kinetic,thermodynamic and equilibrium modeling

Environmental Science and Pollution Research - In this research, the sorption behavior (kinetic, isotherm, and thermodynamic modeling) of heavy metals (Cu (II) and Fe (II)) and pigments (carotenoid...     

Analyzing material flow in Alborz industrial estate,Ghazvin, Iran

Journal of Material Cycles and Waste Management - Industrial ecology and models such as material flow analysis make operational approaches in order to reuse produced waste as primary resources in...