Identification of chemical hazards for terrestrial plants in the regulatory context: Comparison of OECD and ISO guidelines

Standardized test protocols are used in the regulatory context for identifying the hazardous properties of chemicals, wastes, and contaminated materials. This paper compares the relevance of two guidelines measuring effects on terrestrial plants, the OECD TG 208 and the ISO TG 22030 and presents the scientific basis for a recent decision of the European Chemicals Agency (ECHA) under the European chemicals regulation REACH. If there are no specific phytotoxicity alerts, both guidelines are considered suitable for assessing long-term hazards, providing that a sufficient number of species is included in the OECD protocol, the recommended minimum number is six, which offer a reasonably broad selection of species to account for interspecies sensitivity. The proposed methodology, based on a combination of probabilistic assessments using Monte Carlo analysis, can be adapted for supporting similar decisions under specific regulatory processes; for example, for assessing contaminated soils or pesticides’ applications.     

PM<Subscript>10</Subscript> source apportionment in the surroundings of the San Vicente del Raspeig cement plant complex in southeastern Spain

Introduction  

The concentrations of trace metals, ionic species, and carbonaceous components in PM₁₀ (particulate matter with aerodynamic diameters smaller than 10 μm) were measured from samples collected near an industrial complex, primarily composed of cement plants, in southeastern Spain, from September 2005 to August 2006.     

Application of pig slurry to soils. Effect of air stripping treatment on nitrogen and TOC leaching

The effect of physical–chemical slurry treatment on the mobility and transformation of nitrogen and organic matter from pig slurry after soil application is evaluated. Two different pig slurries (one treated by stripping with air at pH = 9 and another non-treated) were applied at the top of a soil column, containing approximately 100 kg of soil. Effluents were monitored measuring concentration values of ammonia, nitrites, nitrates and total organic carbon (TOC). The breakthrough curves were modelled using STANMOD and HYDRUS 1D codes. Low concentrations of ammonia were detected in the effluent recovered at the bottom of the soil profile for both types of slurry. Nitrate concentration in effluent was lower and more homogenous over time when applying stripping treated pig slurry. In N modelling, adsorption of ammonia by soil proved an important process, nitrite and nitrate adsorption being less significant, although not negligible. Transformation from ammonia to nitrite controls the kinetics of the nitrification process. Total organic carbon in the column effluent was higher in the experiment using treated pig slurry, which can be attributed to organic matter solubilisation in the stripping treatment process.     

Design and first experimental results of a bubbling fluidized bed for air gasification of plastic waste

Plastic wastes have an especially high potential for use as alternative fuels, considering their high heating value and their large and stable availability. They could be used in electricity production based on gasification technologies, wherein electricity is produced in engines by means of the conversion of plastic wastes into a valuable gas. However, there are still some technical barriers to overcome before this technology can access the commercial stage, and further scientific research is needed to gain deeper understanding of the process and to be able to control and optimize it. This research presents the design and first experimental results of a bubbling fluidized bed gasifier conceived for the gasification of actual plastic residues. The experimental tests revealed that the selection and design of the reactor were adequate and proved some of the advantages of using plastic as a fuel, related in part to the absence of ashes and char. A valuable syngas over 5 MJ/m³ was generated, which contained a considerable fraction of methane as well as hydrogen and carbon monoxide as main combustible gases. The highest efficiency was achieved when the equivalence ratio was increased to 0.35, reaching 61 % in terms of cold gas efficiency and 66 % carbon conversion.     

Population Viability Analysis of Captive and Released Bearded Vulture Populations

With the computer program VORTEX I ran a series of simulations of the Bearded Vulture ( Gypaetus barbatus ) population held in captivity in European zoos and of the population released in the Alps. The simulations showed that the risk of extinction of the captive population with the extraction rates currently in use is low. It seems possible to maintain the current release rate of two fledglings per year at each of the four release sites in the Alps, but it does not seem possible to increase the release rate by expanding the project to other European mountains without dangerously depleting the captive population. The models showed that the most effective way to increase the release rate without increasing the captive population size is by improving hatching success in captivity. The information on the demographic parameters of the Bearded Vulture population released in the Alps was not good enough to predict the ultimate fate of the present population or to allow for recommendations on how long the population should continue to be supplemented. Although it will be necessary to wait some years to see if Bearded Vultures are able to breed in the wild in the Alps and to estimate fecundity rates, it should be possible to improve the monitoring of the individuals released to obtain more-precise survival estimates. The models of the captive and released population also showed that it should at least be possible to have an artificially supplemented Bearded Vulture population in the Alps, but because this is not the goal of the present reintroduction project, the organizations involved should decide whether this is a politically or economically desirable goal.     

Hybridization and the Extinction of Rare Plant Species

Much has been written about the role of interspecific competition, disease, herbivory, and the loss of key mutualisms in the extinction of rare plant species. Interspecific hybridization rarely is considered among the biotic interactions that promote extinction. We show how hybridization may contribute to the demise of rare plant species through demographic swamping and genetic assimilation by an abundant congener. We contend that the growth of the hybrid subpopulation is the key to rare species assimilation, and we show how the production of hybrid seed, the fitness of hybrids, and pest pressure affect hybrid proliferation. We also discuss how habitat disturbance, unspecialized pollinators, and weak crossing barriers promote hybridization, and how the negative consequences of hybridization are unlikely to be compensated for by immigration from conspecific populations. We also illustrate stages in the demise of species in island floras. We suggest that hybridization is an increasing threat to rare species because ecological barriers are being disrupted by human activities.     

Analysis of PM10, PM2.5, and PM2 5-10 concentrations in Santiago, Chile, from 1989 to 2001

Daily particle samples were collected in Santiago, Chile, at four urban locations from January 1, 1989, through December 31, 2001. Both fine PM with da < 2.5 microm (PM2.5) and coarse PM with 2.5 < da < 10 microm (PM2.5-10) were collected using dichotomous samplers. The inhalable particle fraction, PM10, was determined as the sum of fine and coarse concentrations. Wind speed, temperature and relative humidity (RH) were also measured continuously. Average concentrations of PM2.5 for the 1989-2001 period ranged from 38.5 microg/m3 to 53 microg/m3. For PM2.5-10 levels ranged from 35.8-48.2 microg/m3 and for PM10 results were 74.4-101.2 microg/m3 across the four sites. Both annual and daily PM2.5 and PM10 concentration levels exceeded the U.S. National Ambient Air Quality Standards and the European Union concentration limits. Mean PM2.5 levels during the cold season (April through September) were more than twice as high as those observed in the warm season (October through March); whereas coarse particle levels were similar in both seasons. PM concentration trends were investigated using regression models, controlling for site, weekday, month, wind speed, temperature, and RH. Results showed that PM2.5 concentrations decreased substantially, 52% over the 12-year period (1989-2000), whereas PM2.5-10 concentrations increased by approximately 50% in the first 5 years and then decreased by a similar percentage over the following 7 years. These decreases were evident even after controlling for significant climatic effects. These results suggest that the pollution reduction programs developed and implemented by the Comisión Nacional del Medio Ambiente (CONAMA) have been effective in reducing particle levels in the Santiago Metropolitan region. However, particle levels remain high and it is thus imperative that efforts to improve air quality continue.     

Not Only Single Mating in Stingless Bees

Queens of the large, pantropical and fully eusocial taxon Meliponinae (stingless bees) are generally considered to be singly mated. We indirectly estimated queen mating frequency in two meliponids, Melipona beecheii and Scaptotrigona postica, by examining genotypes of workers at microsatellite DNA loci. Microsatellites were highly variable, providing suitable markers with which to assign patrilinial origin of workers within colonies headed by single queens. Queen mating frequency varied between 1 and 3 (M. beecheii) and 1 and 6 (S. postica), representing the first clear documentation of polyandry in the Meliponinae. Effective paternity frequency, m _e , was lower, although above 2 for S. postica. Stingless bees may provide suitable subjects for the testing of recent inclusive fitness arguments describing intracolony kin conflict in social Hymenoptera. Received: 26 August 1998 / Accepted in revised form: 18 November 1998     

Diversity of eco-innovations: Reflections from selected case studies

An analytical framework is developed in this paper in order to explore the diversity of eco-innovations according to several key dimensions (design, user, product service and governance). The framework is used to analyse a set of case studies of eco-innnovation processes. The diversity of the analysed eco-innovations appears to be considerable; each of them involves different kinds of combinations of elements pertaining to those dimensions. Albeit the design dimension is decisive to determine the environmental impacts of the innovation, all dimensions can play a significant role in the management of eco-innovation. Our findings suggest that the capacity of eco-innovations to provide new business opportunities and contribute to the transformation towards a sustainable society depends on the interplay of those dimensions and the engagement of key stakeholders in the innovation process.