PREDICTIVE REAL TIME CONTROL OF SURCHARGED INTERCEPTORS: IMPACT OF SEVERAL CONTROL PARAMETERS1

ABSTRACT: A global predictive real time control strategy minimizing overflow volumes from combined sewers during rainfall was applied to control flows entering the Marigot interceptor (Laval, Canada) for 23 rain events that occurred in this urban area during the summer of 1989. Different surcharge intensities were allowed in the sewer. The duration of the control horizon as well as the location and number of control regulators were varied to assess the impact of these parameters on total overflow volumes and on control safety. Due to the high propagation speed of flow waves in pressurized conduits, it was found that five‐ minute control horizons were sufficient to ensure control performance and safety when important surcharges were permitted in the interceptor and when the controlled regulators were located where pressurized flow occurred. It was also found that it is possible to reduce the number of controlled regulators by placing them at locations intercepting the largest volumes of water during rain periods.     

Relatedness and environment affect traits associated with invasive and noninvasive introduced Commelinaceae.

Understanding the traits of invasive species may improve the ability to predict, prevent, and manage invasions. I compared morphological and performance traits of five congeneric pairs of invasive and noninvasive Commelinaceae across a factorial experiment using a range of water and nutrient availabilities. Invasive species had greater fecundity and vegetative reproduction than their noninvasive relatives. The invasive species also had higher relative growth rates, greater specific leaf area, and more plastic root-to-shoot ratios than noninvasive species. However, whether a trait was associated with invasiveness often depended on both environment and relatedness. Invasives had greater sexual and vegetative reproduction, higher specific leaf area, and greater relative growth rates than noninvasive congeners, but only in some environments. Differences between invasive and noninvasive taxa were greatest at high nutrient availabilities. These results suggest that studies of invasive species' traits must incorporate information on conditions under which the trait was measured. In addition, incorporating information on relatedness improved our ability to detect associations between species traits, such as specific leaf area and relative growth rate, and invasiveness, suggesting that such information may be required for a complete understanding of what makes a species invasive.     

我国西北黄土对阿特拉津的吸附行为及影响因素

为了探讨ATZ(阿特拉津)在黄土中的吸附/解吸行为及主要影响因素,以我国西北黄土为供试土样,采用批量试验法研究了黄土对ATZ的吸附动力学和热力学行为特征. 结果表明:黄土对ATZ的吸附动力学过程更符合准二级动力学模型,吸附热力学过程更符合线性分配的Henry吸附模型(R2>0.90),吸附过程中ΔGθ(吉布斯自由能)及ΔHθ(焓变)均小于0、ΔSθ(熵变)大于0,25～45 ℃温度范围内E(吸附平均自由能)为0.86～1.30 kJ/mol,表明黄土对ATZ的吸附过程以物理吸附为主,属于自发放热过程且导致吸附体系混乱度增加. 黄土对ATZ的吸附影响因素分析结果显示,随着系统温度的升高,ATZ在黄土中的饱和吸附量下降;pH在2～10范围内变化时,ATZ在黄土中的饱和吸附量随pH的增加呈明显降低趋势;初始ρ(ATZ)从2.5 mg/L增至10.0 mg/L时,黄土对ATZ的饱和吸附量也相应地从0.082 5 mg/g增至0.621 0 mg/g. 结果显示,ATZ在黄土中的吸附速率受内部扩散、表面吸附和液膜扩散的共同影响,并且吸附过程主要受到土壤有机质疏水性分配作用的影响.      

Evaluation of the Effect of Chemical or Enzymatic Synthesis Methods on Biodegradability of Polyesters

This work compares the biodegradability of polyesters produced by an esterification reaction between glycerol and oleic di-acid (D 18:1) issued from green chemical pathways, via either classical thermo-chemical methods, or an enzymatic method using the immobilized lipase of Candida antartica B (Novozym 435). An elastomeric polymer synthesized by enzymatic catalysis is more biodegradable than an elastomeric thermo-chemical polyester synthesized by a standard chemical procedure. This difference lies in percentage of the dendritic motifs, in values of the degree of substitution, and certainly in cross-links inducing an hyper-branched structure less accessible to the lipolytic enzymes in a waste treatment plant. However, when the elastomeric polymer synthesized by enzymatic catalysis is processed at high temperature as required for certain industrial applications, it presents an identical rate of biodegradation than the chemical polyester. The advantages of the thermo-chemical methods are greater speed and lower cost. Enzymatic synthesis appears be suited to producing polyesters, devoid of metallic catalysts, which must be used without processing at high temperature to keep a high biodegradability.     

Cellular arsenic transport pathways in mammals

Natural contamination of drinking water with arsenic results in the exposure of millions of people world-wide to unacceptable levels of this metalloid. This is a serious global health problem because arsenic is a Group 1 (proven) human carcinogen and chronic exposure is known to cause skin, lung, and bladder tumors. Furthermore, arsenic exposure can result in a myriad of other adverse health effects including diseases of the cardiovascular, respiratory, neurological, reproductive, and endocrine systems. In addition to chronic environmental exposure to arsenic, arsenic trioxide is approved for the clinical treatment of acute promyelocytic leukemia, and is in clinical trials for other hematological malignancies as well as solid tumors. Considerable inter-individual variability in susceptibility to arsenic-induced disease and toxicity exists, and the reasons for such differences are incompletely understood. Transport pathways that influence the cellular uptake and export of arsenic contribute to regulating its cellular, tissue, and ultimately body levels. In the current review, membrane proteins (including phosphate transporters, aquaglyceroporin channels, solute carrier proteins, and ATP-binding cassette transporters) shown experimentally to contribute to the passage of inorganic, methylated, and/or glutathionylated arsenic species across cellular membranes are discussed. Furthermore, what is known about arsenic transporters in organs involved in absorption, istribution, and metabolism and how transport pathways contribute to arsenic elimination are described.     

Emergency braking is affected by the use of cruise control

Objective: We compared the differences in the braking response to vehicle collision between an active human emergency braking (control condition) and cruise control (CC) or adaptive cruise control (ACC).

Methods: In 11 male subjects, age 22 to 67 years, we measured the active emergency braking response during manual driving using the accelerator pedal (control condition) or in condition mimicking CC or ACC. In both conditions, we measured the brake reaction time (BRT), delay to produce the peak braking force (PBD), total emergency braking response (BRT + PBD), and peak braking force (PBF). Electromyograms of leg and thigh muscles were recorded during braking. The tonic vibratory response (TVR), Hoffman reflex (HR), and M-waves were recorded in leg muscles to explore the change in sensorimotor control.

Results: No difference in PBF, TVR amplitude, HR latency, and H_max/M_max ratio were found between the control and CC/ACC conditions. On the other hand, BRT and PBD were significantly lengthened in the CC/ACC condition (240 ± 13 ms and 704 ± 70 ms, respectively) compared to control (183 ± 7 ms and 568 ± 36 ms, respectively). BRT increased with the age of participants and the driving experience shortened PBD and increased PBF.

Conclusions: In male subjects, driving in a CC/ACC condition significantly delays the active emergency braking response to vehicle collision. This could result from higher amplitude of leg motion in the CC/ACC condition and/or by the age-related changes in motor control. Car and truck drivers must take account of the significant increase in the braking distance in a CC/ACC condition.     

SWAT‐LUT: A Desktop Graphical User Interface for Updating Land Use in SWAT

Long‐term simulations of agricultural watersheds have often been done assuming constant land use over time, but this is not a realistic assumption for many agricultural regions. This paper presents the soil and water assessment tool (SWAT)‐Landuse Update Tool (LUT), a standalone, user‐friendly desktop‐based tool for updating land use in the SWAT model that allows users to process multi‐year land use data. SWAT‐LUT is compatible with several SWAT model interfaces, provides users with several options to easily prepare and incorporate land use changes (LUCs) over a simulation period, and allows users to incorporate past or emerging land use categories. Incorporation of LUCs is expected to provide realistic model parameterization and scenario simulations. SWAT‐LUT is a public domain interface written in Python programming language. Two applications at the Fort Cobb Reservoir Experimental Watershed located in Oklahoma and pertinent results are provided to demonstrate its use. Incorporating LUCs related to implementation of recommended conservation practices over the years reduced discharge, evapotranspiration, sediment, total nitrogen, and total phosphorus loads by 59%, 9%, 68%, 53%, and 88%, respectively. The user’s manual is included in this article as Supporting Information. The SWAT‐LUT executable file and an example SWAT project with three land use rasters and the user’s manual are available at the United States Department of Agriculture‐Agricultural Research Service Grazinglands Research Laboratory website under Software. Editor’s note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Detecting Insect Pollinator Declines on Regional and Global Scales

Recently there has been considerable concern about declines in bee communities in agricultural and natural habitats. The value of pollination to agriculture, provided primarily by bees, is >$200 billion/year worldwide, and in natural ecosystems it is thought to be even greater. However, no monitoring program exists to accurately detect declines in abundance of insect pollinators; thus, it is difficult to quantify the status of bee communities or estimate the extent of declines. We used data from 11 multiyear studies of bee communities to devise a program to monitor pollinators at regional, national, or international scales. In these studies, 7 different methods for sampling bees were used and bees were sampled on 3 different continents. We estimated that a monitoring program with 200–250 sampling locations each sampled twice over 5 years would provide sufficient power to detect small (2–5%) annual declines in the number of species and in total abundance and would cost U.S.$2,000,000. To detect declines as small as 1% annually over the same period would require >300 sampling locations. Given the role of pollinators in food security and ecosystem function, we recommend establishment of integrated regional and international monitoring programs to detect changes in pollinator communities. Detección de Declinaciones de Insectos Polinizadores a Escalas Regional y Global     

Managing compost stability and amendment to soil to enhance soil heating during soil solarization

Soil solarization is a method of soil heating used to eradicate plant pathogens and weeds that involves passive solar heating of moist soil mulched (covered) with clear plastic tarp. Various types of organic matter may be incorporated into soil prior to solarization to increase biocidal activity of the treatment process. Microbial activity associated with the decomposition of soil organic matter may increase temperatures during solarization, potentially enhancing solarization efficacy. However, the level of organic matter decomposition (stability) necessary for increasing soil temperature is not well characterized, nor is it known if various amendments render the soil phytotoxic to crops following solarization. Laboratory studies and a field trial were performed to determine heat generation in soil amended with compost during solarization. Respiration was measured in amended soil samples prior to and following solarization as a function of soil depth. Additionally, phytotoxicity was estimated through measurement of germination and early growth of lettuce seedlings in greenhouse assays. Amendment of soil with 10% (g/g) compost containing 16.9 mg CO₂/g dry weight organic carbon resulted in soil temperatures that were 2–4 °C higher than soil alone. Approximately 85% of total organic carbon within the amended soil was exhausted during 22 days of solarization. There was no significant difference in residual respiration with soil depth down to 17.4 cm. Although freshly amended soil proved highly inhibitory to lettuce seed germination and seedling growth, phytotoxicity was not detected in solarized amended soil after 22 days of field solarization.