Sex ratio and optimal harvest of canvasback ducks,A model

The North American population of canvasback ducks (Aythya valisineria) exhibits extreme distortion of the sex ratio in favor of males. This paper describes a model which accounts for this pattern by relatively heavier female mortality in both the breeding and nonbreeding seasons. The density-dependence of winter mortality leads to the conclusion that the observed sex ratio depresses total population numbers. Variation in nesting success is shown to influence sex ratios and strongly depress population numbers. Because a standard harvest scheme can be demonstrated to severely depress the numbers of ducks, an alternative graduated or weighted harvest procedure is recommended.     

Optimization of the high-pressure, near-critical liquid-based microsortation of recyclable post-consumer plastics

High-pressure, near-critical liquids were used as float-sink separation media for the microsortation of polyolefin mixtures and PET/PVC mixtures. Near-critical carbon dioxide was used for the refinement of the polyolefins, and sulfur hexafluoride was used to separate post-consumer PVC from PET. Preliminary experiments indicated that there was no overlap in the density ranges of post-consumer HDPE, LDPE and PP containers. There was no overlap in the PET and PVC densities, with the exception of a single PVC packaging material with a density in the PET range. These initial results indicated that a float-sink separation was a viable means of microsortation. Separations of 91% LDPE (1/8′ beads)/9% PP (1/8′ chopped strands) resin mixtures and mixed post-consumer polyolefin flakes were then conducted in a laboratory-scale, 1-I batch apparatus. This apparatus not only permitted the observation of the separation, but also enabled the separated fractions to be removed from the high-pressure environment. The results indicated that LDPE purity of greater than 98.9% was obtained in 3 min or less if (a) the fluid density was 0.018 g/cm³ greater than the PP density and only 0.002 g/cm³ less than the LDPE density, thereby providing the greatest buoyancy force for the removal of the PP, (b) the fluid was recirculated upward through the bed of mixed plastics, facilitating the upward movement of the PP, and (c) the loading was kept at levels below 40% by volume. HDPE purity of 99% was also attained with clean, dry, post-consumer mixed plastic flakes. The loadings for these separations were very low, however, due to the difficulty in agitating the mixed bed of plastics using fluid recirculation. An economic analysis of these microsortation processes indicated that the value of the sorted plastics relative to the mixed feed must increase by approx. $0.08/lb for the CO₂-based separation and approx. $0.27/lb for the SF₆-based separation to justify the implementation of these high-pressure processes.     

Application of slipstreamed air pollution control devices on waste-as-fuel processes

The recovery of energy from the combustion of municipal solid wastes is becoming an attractive alternative as landfill space becomes scarce and the availability of fossil fuels decreases. Particulate emissions from “waste-as-fuel” processes, however, may differ significantly in chemical and physical properties from particulate emissions produced by firing only coal. Such differences can affect the design and operation of air pollution control equipment. Presented in this paper are the results of a 2-month test program at Ames, Iowa, with a mobile electrostatic precipitator (ESP) and a mobile scrubber supplied by the U.S. Environmental Protection Agency (EPA), Industrial Environmental Research Laboratory (IERL), Research Triangle Park. PEDCo Environmental, Inc., and Acurex Corporation jointly conducted the test program to examine the effect of burning refuse-derived fuel (RDF) on particulate and heavy metal control efficiencies. The mobile ESP was used only as a primary control device, whereas the mobile scrubber was tested both upstream and downstream of the existing full-scale ESP. This paper also presents a status report on a PEDCo test program with a pilot fabric filter at Ames.     

Results of a survey of BGM cell culture practices

Ninety-eight laboratories in 16 countries were surveyed in 1979 to determine the uniformity of methods for the assay of human viruses in BGM cells. None of the 58 responding laboratories applied identical methodology. A number of these practices were sufficiently different to assure a significant variance in liter with the assay of standardized virus samples. The results of this survey indicate a definite need for implementing uniform cell culture practices for the enumeration and identification of viruses in the environment.     

A COMPARISON OF PHOSPHORUS AND WATER CONTRIBUTIONS BY SNOWFALL AND RAIN IN NORTHEAST OHIO1

ABSTRACT A record snowfall of 55.8 centimeters occurred on December 1 and 2, 1974 in Portage County, Ohio. An early winter thaw melted the greater part of the snow by December 22, 1974, and a two-day rain fell from December 23 to December 25. These weather events provided an opportunity to compare snowmelt and rainfall contribution to runoff and phosphorus loading to the Twin Lakes Watershed. Phosphorus concentrations of the snow and rain were determined. Six lake inflows and two lake outflows were measured daily for volume and phosphorus concentration. The snow added 217,000 cubic meters of water and 2.2 kilograms of total phosphorus to the watershed. The rain added 74,000 cubic meters of water and 1.6 kilograms of total phosphorus. Total water discharge from the watershed during December was 244,537 cubic meters and total phosphorus output was 20.3 kilograms. The snow provided 49.9% of the discharge and 8% of the phosphorus whereas the rainfall contributed 28% of the discharge and 6% of the phosphorus. These results indicate that while snow is a significant source of water, it is not a large source of phosphorus. The greatest contribution of phosphorus comes from fine sediment carried by storm runoff.     

The Effects of Ocean Disposal of Sewage Sludge On the Relative Abundance of Benthic Megafauna

Disposal of sewage sludge in the New York Bight Apex (12-Mile Dump Site) ceased at the end of December 1987. Previous efforts to quantify the effects of sludge were hindered by the inability to obtain true replication. the cessation of dumping afforded the opportunity to apply the technique of replication in time, also known as a Before/After, Control/Impact design. Conditionally, this method allows one to separate treatment effects from the natural differences that confound many environmental impact studies. the Environmental Processes Division of the Northeast Fisheries Center, National Marine Fisheries Service sampled the benthic environment of the New York Bight Apex from June 1986 through September 1989 using a sample design based on the technique of replication in time.

Three dominant species (rock crab, Cancer irroratus; little skate; Raja erinacea; and winter flounder, Pseudopleuronectes americanus) and total demersal finfish, collected by otter trawl, showed no statistically significant response to the cessation of disposal. American lobster (Homarus americanus) increased in local abundance, but this result was possibly confounded by a change in fishing effort.