Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction

The purpose of this study is to quantify the thermal conductivity of sewage sludge related to reaction temperature for the optimal design of a thermal hydrolysis reactor. We continuously quantified the thermal conductivity of dewatered sludge related to the reaction temperature. As the reaction temperature increased, the dewatered sludge is thermally liquefied under high temperature and pressure by the thermal hydrolysis reaction. Therefore, the bound water in the sludge cells comes out as free water, which changes the dewatered sludge from a solid phase to slurry in a liquid phase. As a result, the thermal conductivity of the sludge was more than 2.64 times lower than that of the water at 20℃. However, above 200℃, it became 0.704 W/m?°C, which is about 4% higher than that of water. As a result, the change in physical properties due to thermal hydrolysis appears to be an important factor for heat transfer efficiency.

ImplicationsThe thermal conductivity of dewatered sludge is an important factor the optimal design of a thermal hydrolysis reactor. The dewatered sludge is thermally liquefied under high temperature and pressure by the thermal hydrolysis reaction. The liquid phase slurry has a higher thermal conductivity than pure water.     

Comparing the ability of a non-indigenous and a native seaweed to induce anti-herbivory defenses

Phenotypic plasticity could be a key mechanism of successful species invasion. Few studies, however, have evaluated whether a non-indigenous species induces anti-herbivore defenses after its introduction to new habitats. We tested how a non-indigenous (Mastocarpus stellatus) and a native red seaweed (Chondrus crispus) responded to grazing by a periwinkle (Littorina littorea) and an isopod (Idotea granulosa) in Helgoland, Germany. In the donor region of the Mastocarpus population, that is Iceland, the periwinkle is missing, whereas the isopod is present. Our results indicate that Mastocarpus experienced less consumption by Littorina (but not by Idotea) than Chondrus. Moreover, Mastocarpus induced defenses in response to Idotea (but not to Littorina) grazing, whereas Chondrus induced anti-herbivory responses to both species of herbivores. Grazed Mastocarpus grew equally to non-grazed conspecifics, while growth of grazed Chondrus was lower than of ungrazed conspecifics. Hence, the non-indigenous Mastocarpus responded differently to grazing stress than the native Chondrus with respect to anti-herbivory and compensatory responses, which perhaps supported the successful Mastocarpus establishment in a new range.     

Acute effects of removing large fish from a near-pristine coral reef

Large animals are severely depleted in many ecosystems, yet we are only beginning to understand the ecological implications of their loss. To empirically measure the short-term effects of removing large animals from an ocean ecosystem, we used exclosures to remove large fish from a near-pristine coral reef at Palmyra Atoll, Central Pacific Ocean. We identified a range of effects that followed from the removal of these large fish. These effects were revealed within weeks of their removal. Removing large fish (1) altered the behavior of prey fish; (2) reduced rates of herbivory on certain species of reef algae; (3) had both direct positive (reduced mortality of coral recruits) and indirect negative (through reduced grazing pressure on competitive algae) impacts on recruiting corals; and (4) tended to decrease abundances of small mobile benthic invertebrates. Results of this kind help advance our understanding of the ecological importance of large animals in ecosystems.     

Feeding ecology and niche segregation in oceanic top predators off eastern Australia

We examined the feeding ecology and niche segregation of the ten most abundant fish species caught by longline operations off eastern Australia between 1992 and 2006. Diets of 3,562 individuals were examined. Hook timer data were collected from a further 328 fish to examine feeding behaviour in relation to depth and time of day. Prey biomass was significantly related to predator species, predator length and year and latitude of capture. Although the fish examined fed on a mix of fish, squid and crustacea, fish dominated the diet of all species except small albacore (Thunnus alalunga) which fed mainly on crustacea and large swordfish (Xiphias gladius) and albacore which fed mainly on squid. Cannibalism was observed in lancetfish (Alepisaurus spp.). Multidimensional scaling identified three species groups based on their diet composition. One group consisted of yellowfin tuna (T. albacares), striped marlin (Tetrapturus audax) and dolphinfish (Coryphaena hippurus); a second group consisted of bigeye tuna (T. obesus), swordfish and albacore; and a third consisted of southern bluefin tuna (T. maccoyii) and blue shark (Prionace glauca). Of note was the separation of mako shark (Isurus oxyrhynchus) and lancetfish from all other predators. Prey length generally increased with increasing predator length although even large predators fed on a wide range of prey lengths including very small prey. Overall, differences in prey type and size, feeding times and depths were noted across the range of species examined to the extent that predators with overlapping prey, either in type or size, fed at different times of the diel period or at different depths. Taken together these data provide evidence for feeding niche segregation across the range of oceanic top predators examined.     

Predicting fish diet composition using a bagged classification tree approach: a case study using yellowfin tuna (<Emphasis Type="Italic">Thunnus albacares</Emphasis>)

We provided a classification tree modeling framework for investigating complex feeding relationships and illustrated the method using stomach contents data for yellowfin tuna (Thunnus albacares) collected by longline fishing gear deployed off eastern Australia between 1992 and 2006. The non-parametric method is both exploratory and predictive, can be applied to varying size datasets and therefore is not restricted to a minimum sample size. The method uses a bootstrap approach to provide standard errors of predicted prey proportions, variable importance measures to highlight important variables and partial dependence plots to explore the relationships between explanatory variables and predicted prey composition. Our results supported previous studies of yellowfin tuna feeding ecology in the region. However, the method provided a number of novel insights. For example, significant differences were noted in the prey of yellowfin tuna sampled north of 20°S in summer where oligotrophic waters dominate. The analysis also identified that sea-surface temperature, latitude and yellowfin size were the most important variables associated with dietary differences. The methodology is appropriate for delineating ecosystem-level trophic dynamics, as it can easily incorporate large datasets comprising multiple predators to explore trophic interactions among members of a community. Broad-scale relationships among explanatory variables (environmental, biological, temporal and spatial) and prey composition elucidated by this method then serve to focus and lend validity to subsequent fine-scale analyses of important parameters using standard diet methods and chemical tracers such as stable isotopes.     

不同植物人工湿地净化效果及基质微生物状况差异分析

为研究不同植物对人工湿地污染物净化效果和基质微生物状况的影响,采用序批式运行的沙培模拟人工湿地,探讨了菖蒲、香蒲、千屈菜、芦苇和白鹤芋5种湿地植物在不同HRT(水力停留时间,分别为1,3和5 d)下对模拟废水中TP,NH₄+-N和COD_Cr去除效果的影响,比较了不同植物类型模拟人工湿地中基质微生物的数量差异. 结果表明,不同植物系统对污染物的去除随HRT延长逐渐提高,HRT为5 d时各植物系统对污染物的去除效果最佳.TP,NH₄+-N和COD_Cr的最高去除率分别达90.4%,61.7%和96.4%.相对于其他试验系统,菖蒲系统对各污染指标均具有最优的去除效果. 植物种类对基质微生物数量的影响无显著差异.研究还发现,各系统中亚硝酸细菌数量与NH₄+-N去除率之间呈显著相关.      

Interactions of Natural Colloidal Material and Phenanthrene in the Aquatic Environment

Resuspension of contaminated aquatic sediments by natural and anthropogenic activities (i.e., dredging, boat activities, fish, wildlife, storms, runoff) increases the flux of natural colloidal material and colloidally bound contaminants into the overlying water column. Colloidal material extracted from lower Fox River sediments was analyzed for various physical and chemical characteristics and subjected to batch aggregation studies under controlled conditions of pH (～3–8) and colloid concentrations (5 and 9 mg L^?1 as TOC equivalents) in the presence of dissolved phenanthrene in solution. Under water chemistry conditions where pH and K⁺ concentration are typical of most natural waters (10^?2 M K⁺ and pH～8), the presence of phenanthrene in solution (average [phen] = 0.2–0.4 mg/L) prevents particle aggregation and decreases the settling rate of these particles. Ultimately, this increases the total concentration of colloidally bound contaminants in the water column. Dredging is the most popular remediation technique for removing contaminated sediments from the aquatic environment. However, this laboratory study suggests that for typical waters, dredging may potentially elevate the concentrations of contaminants found in the water column. © 2001 John Wiley & Sons, Inc.     

Ecological risk assessment of arsenic and metals in sediments of coastal areas of northern Bohai and Yellow Seas, China

Distributions of arsenic and metals in surface sediments collected from the coastal and estuarine areas of the northern Bohai and Yellow Seas, China, were investigated. An ecological risk assessment of arsenic and metals in the sediments was evaluated by three approaches: the Sediment Quality Guidelines (SQGs) of the United States Environmental Protection Agency (USEPA), the degree of contamination, and two sets of SQGs indices. Sediments from the estuaries of the Wuli and Yalu Rivers contained some of the greatest concentrations of arsenic, cadmium, copper, mercury, lead, and zinc. Median concentrations of cadmium and mean concentrations of lead and zinc were greater than background concentrations determined for the areas. All sediments were considered to be heavily polluted by arsenic, but moderately polluted by chromium, lead, and cadmium. Current concentrations of arsenic and metals are unlikely to be acutely toxic, but chronic exposures would be expected to cause adverse effects on benthic invertebrates at 31.4% of the sites.     

Source contributions to fine particulate matter in an urban atmosphere

This paper proposes a practical method for estimating source attribution by using a three-step methodology. The main objective of this study is to explore the use of the three-step methodology for quantifying the source impacts of 24-h PM2.5 particles at an urban site in Seoul, Korea. 12-h PM2.5 samples were collected and analyzed for their elemental composition by ICP-AES/ICP-MS/AAS to generate the source composition profiles. In order to assess the daily average PM2.5 source impacts, 24-h PM2.5 and polycyclic aromatic hydrocarbons (PAH) ambient samples were simultaneously collected at the same site. The PM2.5 particle samples were then analyzed for trace elements. Ionic and carbonaceous species concentrations were measured by ICP-AES/ICP-MS/AAS, IC, and a selective thermal MnO2 oxidation method. The 12-h PM2.5 chemical data was used to estimate possible source signatures using the principal component analysis (PCA) and the absolute principal component scores method followed by the multiple linear regression analysis. The 24-h PM2.5 source categories were extracted with a combination of PM2.5 and some PAH chemical data using the PCA, and their quantitative source contributions were estimated by chemical mass balance (CMB) receptor model using the estimated source profiles and those in the literature. The results of PM2.5 source apportionment using the 12-h derived source composition profiles show that the CMB performance indices; chi2, R2, and percent of mass accounted for are 2.3%, 0.97%, and 100.7%, which are within the target range specified. According to the average PM2.5 source contribution estimate results, motor vehicle exhaust was the major contributor at the sampling site, contributing 26% on average of measured PM2.5 mass (41.8 microg m-3), followed by secondary sulfate (23%) and nitrate (16%), refuse incineration (15%), soil dust (13%), field burning (4%), oil combustion (2.7%), and marine aerosol (1.3%). It can be concluded that quantitative source attribution to PM2.5 in an urban area where source profiles have not been developed can be estimated using the proposed three-step methodology approach.     

Development of indirect competitive fluorescence immunoassay for 2,2′,4,4′-tetrabromodiphenyl ether using DNA/dye conjugate as antibody multiple labels

An indirect competitive fluorescence immunoassay using a DNA/dye conjugate as antibody multiple labels was developed on 96-well plates for the identification and quantification of 2,2′,4,4′-tetrabromodiphenyl ether (BDE-47) in aqueous samples. A hapten, 2,4,2′-tribromodiphenyl ether-4′-aldehyde, was synthesized, and was conjugated to bovine serum albumin to form a coating antigen. Specific recognition of the antigen by anti-PBDE antiserum was confirmed by a surface plasmon resonance measurement. In the immunoassay, the coating antigen was adsorbed on a 96-well plate first, and a sample, antiserum and biotinylated goat anti-rabbit secondary antibody were then added and reacted sequentially. A biotinylated, double-stranded DNA with 219 base pairs was attached to the secondary antibody by using streptavidin as a molecular bridge. In situ multiple labeling of the antibody was accomplished after addition of a DNA-binding fluorescent dye, SYBR Green I. The working range of the immunoassay for the BDE-47 standard was 3.1-390 μg/L, with an IC₅₀ value of 15.6 μg/L. The calculated LOD of the immunoassay is 0.73 μg/L. The immunoassay demonstrated relatively high selectivity for BDE-47, showing very low cross-reactivity (< 3%) with BDE-15, BDE-153 and BDE-209. With a spiked river water sample containing 50 μup g/L BDE-47, quantification by the immunoassay was 41.9 μg/L, which compared well with the standard GC-ECD method (45.7 μg/L). The developed immunoassay provides a rapid screening tool for polybrominated diphenyl ethers in environmental samples.