Evaluation of an explicit NOx chemistry method in AERMOD

An explicit NO_x chemistry method has been implemented in AERMOD version 15181, ADMSM. The scheme has been evaluated by comparison with the methodologies currently recommended by the U.S. EPA for Tier 3 NO₂ calculations, that is, OLM and PVMRM2. Four data sets have been used for NO₂ chemistry method evaluation. Overall, ADMSM-modeled NO₂ concentrations show the most consistency with the AERMOD calculations of NO_x and the highest Index of Agreement; they are also on average lower than those of both OLM and PVMRM2. OLM shows little consistency with modeled NO_x concentrations and markedly overpredicts NO₂. PVMRM2 shows performance closer to that of ADMSM than OLM; however, its behavior is inconsistent with modeled NO_x in some cases and it has less good statistics for NO₂. The trend in model performance can be explained by examining the features particular to each chemistry method: OLM can be considered as a screening model as it calculates the upper bound of conversion from NO to NO₂ possible with the background O₃ concentration; PVMRM2 includes a much-improved estimate of in-plume O₃ but is otherwise similar to OLM, assuming instantaneous reaction of NO with O₃; and ADMSM allows for the rate of this reaction and also the photolysis of NO₂. Evaluation with additional data sets is needed to further clarify the relative performance of ADMSM and PVMRM2.

Implications: Extensive evaluation of the current AERMOD Tier 3 chemistry methods OLM and PVMRM2, alongside a new scheme that explicitly calculates the oxidation of NO by O₃ and the reverse photolytic reaction, shows that OLM consistently overpredicts NO₂ concentrations. PVMRM2 performs well in general, but there are some cases where this method overpredicts NO₂. The new explicit NO_x chemistry scheme, ADMSM, predicts NO₂ concentrations that are more consistent with both the modeled NO_x concentrations and the observations.     

The South African Experience of Conservation and Social Forestry Outreach Nurseries

Outreach nurseries are favored conservation and social forestry tools globally, but, as with many integrated conservation and development programs (ICDPs), they do not always produce anticipated results. A synopsis of the experience of South African practitioners is provided in this study of 65 outreach nurseries. South African outreach nurseries frequently include financial objectives, creating additional challenges in simultaneously attaining conservation and socioeconomic goals. Progress was hindered by biophysical problems (e.g., lack of water, poor soils, etc.) as well as the harsh socioeconomic conditions facing most communities in which nurseries had been established. Attaining financial viability was challenging. Business management skills were often restricted, and few viability studies included adequate market research. Costs to community participants were usually high, and benefits were limited. Conservation objectives were frequently lost in the struggle to attain financial viability. The management of social processes also proved challenging. Although small scale and relatively straightforward compared with many ICDPs, nurseries usually require substantial institutional support, including a range of technical, business, and development services. Project time frames need to be reconsidered, as practitioners estimate that it takes 5–10 years for nurseries to start meeting objectives, and donors and implementing agencies often operate on 2–3-year project cycles. Detailed viability studies are essential, incorporating a social probe and an assessment of potential impacts of projects on community participants. Progress needs to be continuously evaluated to enable institutions and community participants to adapt to changing conditions as well as ensure that the spectrum of objectives are being achieved.     

Carbon monoxide concentrations in outdoor wood-fired kitchens in Ouagadougou,Burkina Faso—implications for women’s and children’s health

A majority of households in developing countries rely on biomass fuel for cooking, typically burned in open fires or simple stoves. The incomplete combustion of these fuels causes adverse health effects such as respiratory diseases, especially among women and children. However, quantitative data on pollution levels and on associated diseases are limited. We examined cooking habits and self-reported health in 31 households with outdoor open wood fires in Ouagadougou, Burkina Faso, using structured interviews. In eight households, carbon monoxide (CO) was measured using passive sampling. In addition, meteorology and ambient CO concentrations were assessed. The average CO concentration during cooking was 4.3 ppm, with a maximum of 65.3 ppm and minimum of 0.3 ppm (1-min values). A clear daily pattern was observed, with relatively low concentrations during the day and high during the evening, occasionally exceeding the World Health Organization 1- and 8-h guidelines when the air stabilised. On average, CO concentrations were 43 % higher in kitchens located in closed yards than in those located in open yards, showing that fireplace location affected the levels. Eye irritation and coughing among women and children were reported by 30 % of the households. Based on previously reported relations between CO concentrations and fine particles (<2.5 μm), the exposure to biomass smoke appears to be high enough to pose a considerable health risk among women and children in households with outdoor open wood fires. The results suggest that burning should be limited between sunset and dawn and in areas with limited ventilation to reduce pollutions levels.     

Risk factors for increased BTEX exposure in four Australian cities

Benzene, toluene, ethylbenzene and xylenes (BTEX) are common volatile organic compounds (VOCs) found in urban airsheds. Elevated levels of VOCs have been reported in many airsheds at many locations, particularly those associated with industrial activity, wood heater use and heavy traffic. Exposure to some VOCs has been associated with health risks. There have been limited investigations into community exposures to BTEX using personal monitoring to elucidate the concentrations to which members of the community may be exposed and the main contributors to that exposure. In this cross sectional study we investigated BTEX exposure of 204 non-smoking, non-occupationally exposed people from four Australian cities. Each participant wore a passive BTEX sampler over 24h on five consecutive days in both winter and summer and completed an exposure source questionnaire for each season and a diary for each day of monitoring. The geometric mean (GM) and range of daily BTEX concentrations recorded for the study population were benzene 0.80 (0.04-23.8 ppb); toluene 2.83 (0.03-2120 ppb); ethylbenzene 0.49 (0.03-119 ppb); and xylenes 2.36 (0.04-697 ppb). A generalised linear model was used to investigate significant risk factors for increased BTEX exposure. Activities and locations found to increase personal exposure included vehicle repair and machinery use, refuelling of motor vehicles, being in an enclosed car park and time spent undertaking arts and crafts. A highly significant difference was found between the mean exposures in each of the four cities, which may be explained by differences in fuel composition, differences in the mix and density of industry, density of motor vehicles and air pollution meteorology.     

A study of radium bioaccumulation in freshwater mussels, Velesunio angasi, in the Magela Creek catchment, Northern Territory, Australia

Freshwater mussels, Velesunio angasi, along Magela Creek in Australia’s Northern Territory were examined to study radionuclide activities in mussel flesh and to investigate whether the Ranger Uranium mine is contributing to the radium loads in mussels downstream of the mine. Radium loads in mussels of the same age were highest in Bowerbird Billabong, located 20 km upstream of the mine site. Variations in the ratio of [Ra]:[Ca] in filtered water at the sampling sites accounted for the variations found in mussel radium loads with natural increases in calcium (Ca) in surface waters in a downstream gradient along the Magela Creek catchment gradually reducing radium uptake in mussels. At Mudginberri Billabong, 12 km downstream of the mine, concentration factors for radium have not significantly changed over the past 25 years since the mine commenced operations and this, coupled with a gradual decrease of the ²²⁸Ra/²²⁶Ra activity ratios observed along the catchment, indicates that the ²²⁶Ra accumulated in mussels is of natural rather than mine origin. The ²²⁸Th/²²⁸Ra ratio has been used to model radium uptake and a radium biological half-life in mussels of approximately 13 years has been determined. The long biological half-life and the low Ca concentrations in the water account for the high radium concentration factor of 30,000-60,000 measured in mussels from the Magela Creek catchment.     

Climate Considerations in Long-Term Safety Assessments for Nuclear Waste Repositories

For a deep geological repository for spent nuclear fuel planned in Sweden, the safety assessment covers up to 1 million years. Climate scenarios range from high-end global warming for the coming 100 000 years, through deep permafrost, to large ice sheets during glacial conditions. In contrast, in an existing repository for short-lived waste the activity decays to low levels within a few tens of thousands of years. The shorter assessment period, 100 000 years, requires more focus on climate development over the coming tens of thousands of years, including the earliest possibility for permafrost growth and freezing of the engineered system. The handling of climate and climate change in safety assessments must be tailor-made for each repository concept and waste type. However, due to the uncertain future climate development on these vast time scales, all safety assessments for nuclear waste repositories require a range of possible climate scenarios.     

Poly(lactic acid)-Based Composites Containing Natural Fillers: Thermal,Mechanical and Barrier Properties

Natural filler/poly(lactic acid)-Based composites have been prepared by melt blending in order to investigate the resulting thermal, mechanical, and oxygen permeability properties. To this aim, several wastes or by-products (namely, cellulose fibers, wood sawdust, hazelnut shells, flax fibers, corn cob and starch) have been used, ranging from 10 to 30 wt%. The presence of these fillers is responsible of a slight reduction of the polymer degradation temperature in nitrogen as well as of a significant increase of the storage modulus as a function of the filler content. The experimental data obtained by dynamic mechanical analysis have been mathematically fitted, employing three micromechanical models (namely, Voigt, Reuss and Halpin–Tsai). Furthermore, the presence of cellulose or starch has turned out to significantly reduce the polymer oxygen permeability. Finally, in order to fully assess the feasibility of such materials, an economic analysis has been carried out and discussed.     

Oxidative transformation of polybrominated diphenyl ether congeners (PBDEs) and of hydroxylated PBDEs (OH-PBDEs)

BACKGROUND, AIM, AND SCOPE: The historical and widespread use of polybrominated diphenyl ethers (PBDEs) as flame retardants in consumer products worldwide has caused PBDEs to now be regarded as pervasive environmental contaminants. Most recently, hydroxylated PBDEs (OH-PBDEs) and methoxylated PBDEs (MeO-PBDEs) have emerged as environmentally relevant due to reports of their natural production and metabolism. An important parameter for assessing the environmental impact of a chemical substance is persistence. By formulating the concept that persistence is the result of the substance's physicochemical properties and chemical reactivity, Green and Bergman have proposed a new methodology to determine the inherent persistence of a chemical. If persistence could be predicted by straightforward methods, substances with this quality could be screened out before large-scale production/manufacturing begins. To provide data to implement this concept, we have developed new methodologies to study chemical transformations through photolysis; hydrolysis, substitution, and elimination; and via oxidation. This study has focused on adapting an oxidative reaction method to be applicable to non-water soluble organic pollutants. MATERIALS AND METHODS: PBDEs and one MeO-PBDE were dissolved in tetrahydrofuran/methanol and then diluted in alkaline water. The OH-PBDEs were dissolved in alkaline water prior to reaction. The oxidation degradation reaction was performed at 50 degrees C using potassium permanganate as described elsewhere. The pH was maintained at 7.6 with disodium hydrogen phosphate and barium hydrogen phosphate, the latter also serving as a trapping agent for manganate ions. The oxidation reactions were monitored by high-performance liquid chromatography and reaction rates were calculated. RESULTS: The OH-PBDEs have very fast oxidative transformation rates compared to the PBDEs. The reaction rates seem to be primarily dependent on substitution pattern of the pi-electron-donating bromine substituents and of bromine content. There are indications that further reactions of OH-PBDEs, e.g., methylation to the MeO-PBDEs, decrease the oxidation rates, and thereby generate more persistent substances. DISCUSSION: The resistance of PBDEs to oxidation, a major degradation pathway in air, should be further investigated, since these compounds do undergo long range transport. With slight modifications, the original method has been adapted to include a larger variety of chemical substances, and preliminary data are now available on the oxidative transformation rates for PBDEs and of OH-PBDEs. CONCLUSIONS: The original oxidation degradation method can now include non-water soluble compounds. This modification, using low concentrations of test chemicals, allows us to measure oxidative transformation rates, for some of the lower brominated DEs, data that can be used to assess their persistence in future model calculations. Oxidative transformation rates for PBDEs are slow compared to those for the OH-PBDEs. This suggests that OH-PBDEs, when released into the environment, undergo faster oxidative metabolism and excretion than the PBDEs. RECOMMENDATIONS AND PERSPECTIVES: To evaluate the modified method, more degradation reactions with non-water soluble compounds should be investigated. Recent studies show that OH-PBDEs are present in rats and in humans and, because of their activity as endocrine disruptors, determining their subsequent environmental fate is of importance. The resistance of PBDEs to oxidative degradation should be acknowledged as of possible future concern. Several other compound classes (such as polychlorinated biphenyls (PCBs), hydroxylated polychlorinated biphenyls (OH-PCBs), and pharmaceuticals) need to be subjected to this screening method to increase the database of transformation rates that can be used with this model.