A 2.5‐million‐year perspective on coarse‐filter strategies for conserving nature's stage

Climate change will require novel conservation strategies. One such tactic is a coarse‐filter approach that focuses on conserving nature's stage (CNS) rather than the actors (individual species). However, there is a temporal mismatch between the long‐term goals of conservation and the short‐term nature of most ecological studies, which leaves many assumptions untested. Paleoecology provides a valuable perspective on coarse‐filter strategies by marshaling the natural experiments of the past to contextualize extinction risk due to the emerging impacts of climate change and anthropogenic threats. We reviewed examples from the paleoecological record that highlight the strengths, opportunities, and caveats of a CNS approach. We focused on the near‐time geological past of the Quaternary, during which species were subjected to widespread changes in climate and concomitant changes in the physical environment in general. Species experienced a range of individualistic responses to these changes, including community turnover and novel associations, extinction and speciation, range shifts, changes in local richness and evenness, and both equilibrium and disequilibrium responses. Due to the dynamic nature of species responses to Quaternary climate change, a coarse‐filter strategy may be appropriate for many taxa because it can accommodate dynamic processes. However, conservationists should also consider that the persistence of landforms varies across space and time, which could have potential long‐term consequences for geodiversity and thus biodiversity.     

Incorporating connectivity into conservation planning for the optimal representation of multiple species and ecosystem services

Conservation planning tends to focus on protecting species’ ranges or landscape connectivity but seldom both—particularly in the case of diverse taxonomic assemblages and multiple planning goals. Therefore, information on potential trade-offs between maintaining landscape connectivity and achieving other conservation objectives is lacking. We developed an optimization approach to prioritize the maximal protection of species’ ranges, ecosystem types, and forest carbon stocks, while also including habitat connectivity for range-shifting species and dispersal corridors to link protected area. We applied our approach to Sabah, Malaysia, where the state government mandated an increase in protected-area coverage of approximately 305,000 ha but did not specify where new protected areas should be. Compared with a conservation planning approach that did not incorporate the 2 connectivity features, our approach increased the protection of dispersal corridors and elevational connectivity by 13% and 21%, respectively. Coverage of vertebrate and plant species’ ranges and forest types were the same whether connectivity was included or excluded. Our approach protected 2% less forest carbon and 3% less butterfly range than when connectivity features were not included. Hence, the inclusion of connectivity into conservation planning can generate large increases in the protection of landscape connectivity with minimal loss of representation of other conservation targets.     

Comparison of data from two vegetation monitoring methods in semi-natural grasslands

Two vegetation-monitoring methods were compared: subplot frequency analysis (SF) and visual estimation of percentage cover (VE). Two independent observers collected data from two semi-natural, species-rich grasslands on three different occasions during the growth-season. During the last data collection period, survey times were also recorded. The two different data sets from the two methods were compared using partial Redundancy Analyses. The purpose of the comparison was to identify the method that explains most of the relevant variation in biodiversity-monitoring (inter-and intra-site variation), and the variation irrelevant when evaluating data (systematic inter-observer variation and variation due to phenological changes). Compared with VE data, more variation in SF data could be explained by spatial variables, while less variation depended on the observer and time of year surveyed. SF also found more species per plot but took on average five times longer to complete than VE. In conclusion, the different methods are suitable for different purposes: SF is more suitable for purposes demanding high accuracy and high precision, such as long-term biodiversity-monitoring when the identification of small changes has high priority, while VE might be more suitable for a one-time mapping of a large area.     

Revised algorithm for estimating light extinction from IMPROVE particle speciation data

The Interagency Monitoring of Protected Visual Environments (IMPROVE) particle monitoring network consists of approximately 160 sites at which fine particulate matter (PM2.5) mass and major species concentrations and course particulate matter (PM10) mass concentrations are determined by analysis of 24-hr duration sampling conducted on a 1-day-in-3 schedule A simple algorithm to estimate light extinction from the measured species concentrations was incorporated in the 1999 Regional Haze Rule as the basis for the haze metric used to track haze trends. A revised algorithm was developed that is more consistent with the recent atmospheric aerosol literature and reduces bias for high and low light extinction extremes. The revised algorithm differs from the original algorithm in having a term for estimating sea salt light scattering from Cl(-) ion data, using 1.8 instead of 1.4 for the mean ratio of organic mass to measured organic carbon, using site-specific Rayleigh scattering based on site elevation and mean temperature, employing a split component extinction efficiency associated with large and small size mode sulfate, nitrate and organic mass species, and adding a term for nitrogen dioxide (NO2) absorption for sites with NO2 concentration information. Light scattering estimates using the original and the revised algorithms are compared with nephelometer measurements at 21 IMPROVE monitoring sites. The revised algorithm reduces the underprediction of high haze periods and the overprediction of low haze periods compared with the performance of the original algorithm. This is most apparent at the hazier monitoring sites in the eastern United States. For each site, the PM10 composition for days selected as the best 20% and the worst 20% haze condition days are nearly identical regardless of whether the basis of selection was light scattering from the original or revised algorithms, or from nephelometer-measured light scattering.     

Sea Cucumber Aquaculture in the Western Indian Ocean: Challenges for Sustainable Livelihood and Stock Improvement

The decline in sea cucumber fisheries that serve the Asian dried seafood market has prompted an increase in global sea cucumber aquaculture. The tropical sandfish (Holothuria scabra) has, in this context, been reared and produced with mixed success. In the Western Indian Ocean, villagers often participate in the export fishery for sea cucumbers as a source of income. However, with a growing concern of depleted stocks introduction of hatcheries to farm sandfish as a community livelihood and to replenish wild stocks is being promoted. This review identifies and discusses a number of aspects that constitute constraints or implications with regard to development of sandfish farming in the region. The conclusion is that for sandfish farming to live up to its expectations the possible impacts need to be further studied, and that improved evaluation of ongoing projects is required. In the interim, a precautionary approach toward new enterprise activities is suggested.     

Oxidative transformation of polybrominated diphenyl ether congeners (PBDEs) and of hydroxylated PBDEs (OH-PBDEs)

BACKGROUND, AIM, AND SCOPE: The historical and widespread use of polybrominated diphenyl ethers (PBDEs) as flame retardants in consumer products worldwide has caused PBDEs to now be regarded as pervasive environmental contaminants. Most recently, hydroxylated PBDEs (OH-PBDEs) and methoxylated PBDEs (MeO-PBDEs) have emerged as environmentally relevant due to reports of their natural production and metabolism. An important parameter for assessing the environmental impact of a chemical substance is persistence. By formulating the concept that persistence is the result of the substance's physicochemical properties and chemical reactivity, Green and Bergman have proposed a new methodology to determine the inherent persistence of a chemical. If persistence could be predicted by straightforward methods, substances with this quality could be screened out before large-scale production/manufacturing begins. To provide data to implement this concept, we have developed new methodologies to study chemical transformations through photolysis; hydrolysis, substitution, and elimination; and via oxidation. This study has focused on adapting an oxidative reaction method to be applicable to non-water soluble organic pollutants. MATERIALS AND METHODS: PBDEs and one MeO-PBDE were dissolved in tetrahydrofuran/methanol and then diluted in alkaline water. The OH-PBDEs were dissolved in alkaline water prior to reaction. The oxidation degradation reaction was performed at 50 degrees C using potassium permanganate as described elsewhere. The pH was maintained at 7.6 with disodium hydrogen phosphate and barium hydrogen phosphate, the latter also serving as a trapping agent for manganate ions. The oxidation reactions were monitored by high-performance liquid chromatography and reaction rates were calculated. RESULTS: The OH-PBDEs have very fast oxidative transformation rates compared to the PBDEs. The reaction rates seem to be primarily dependent on substitution pattern of the pi-electron-donating bromine substituents and of bromine content. There are indications that further reactions of OH-PBDEs, e.g., methylation to the MeO-PBDEs, decrease the oxidation rates, and thereby generate more persistent substances. DISCUSSION: The resistance of PBDEs to oxidation, a major degradation pathway in air, should be further investigated, since these compounds do undergo long range transport. With slight modifications, the original method has been adapted to include a larger variety of chemical substances, and preliminary data are now available on the oxidative transformation rates for PBDEs and of OH-PBDEs. CONCLUSIONS: The original oxidation degradation method can now include non-water soluble compounds. This modification, using low concentrations of test chemicals, allows us to measure oxidative transformation rates, for some of the lower brominated DEs, data that can be used to assess their persistence in future model calculations. Oxidative transformation rates for PBDEs are slow compared to those for the OH-PBDEs. This suggests that OH-PBDEs, when released into the environment, undergo faster oxidative metabolism and excretion than the PBDEs. RECOMMENDATIONS AND PERSPECTIVES: To evaluate the modified method, more degradation reactions with non-water soluble compounds should be investigated. Recent studies show that OH-PBDEs are present in rats and in humans and, because of their activity as endocrine disruptors, determining their subsequent environmental fate is of importance. The resistance of PBDEs to oxidative degradation should be acknowledged as of possible future concern. Several other compound classes (such as polychlorinated biphenyls (PCBs), hydroxylated polychlorinated biphenyls (OH-PCBs), and pharmaceuticals) need to be subjected to this screening method to increase the database of transformation rates that can be used with this model.     

Identification and quantification of products formed via photolysis of decabromodiphenyl ether

Background, aim, and scope  Decabromodiphenyl ether (DecaBDE) is used as an additive flame retardant in polymers. It has become a ubiquitous environmental contaminant, particularly abundant in abiotic media, such as sediments, air, and dust, and also present in wildlife and in humans. The main DecaBDE constituent, perbrominated diphenyl ether (BDE-209), is susceptible to transformations as observed in experimental work. This work is aimed at identifying and assessing the relative amounts of products formed after UV irradiation of BDE-209. Materials and methods  BDE-209, dissolved in tetrahydrofuran (THF), methanol, or combinations of methanol/water, was exposed to UV light for 100 or 200 min. Samples were analyzed by gas chromatography/mass spectrometry (electron ionization) for polybrominated diphenyl ethers (PBDEs), dibenzofurans (PBDFs), methoxylated PBDEs, and phenolic PBDE products. Results  The products formed were hexaBDEs to nonaBDEs, monoBDFs to pentaBDFs, and methoxylated tetraBDFs to pentaBDFs. The products found in the fraction containing halogenated phenols were assigned to be pentabromophenol, dihydroxytetrabromobenzene, dihydroxydibromodibenzofuran, dihydroxytribromodibenzofuran, and dihydroxytetrabromodibenzofuran. The PBDEs accounted for approximately 90% of the total amount of substances in each sample and the PBDFs for about 10%. Discussion  BDE-209 is a source of PBDEs primarily present in OctaBDEs but also to some extent in PentaBDEs, both being commercial products now banned within the EU and in several states within the USA. It is notable that OH-PBDFs have not been identified or indicated in any of the photolysis studies performed to date. Formation of OH-PBDFs, however, may occur as pure radical reactions in the atmosphere. Conclusions  Photolysis of decaBDE yields a wide span of products, from nonaBDEs to hydroxylated bromobenzenes. It is evident that irradiation of decaBDE in water and methanol yields OH-PBDFs and MeO-PBDFs, respectively. BDE-202 (2,2′,3,3′,5,5′,6,6′-octabromodiphenyl ether) is identified as a marker of BDE-209 photolysis. Recommendations and perspectives  BDE-209, the main constituent of DecaBDE, is primarily forming debrominated diphenyl ethers with higher persistence which are more bioaccumulative than the starting material when subjected to UV light. Hence, DecaBDE should be considered as a source of these PBDE congeners in the environment. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Screening maternal serum alpha-fetoprotein levels and human parvovirus antibodies

The association between gestational infection with human parvovirus (B19) and fetal loss has increased interest in this virus and demand for diagnostic testing. However, serological assays for B19 are not yet widely available. Maternal serum alpha-fetoprotein (MSAFP) testing is commonly used during the second trimester to screen for various fetal defects. We attempted to determine whether an elevated level of MSAFP would be an appropriate indication for B19-specific tests. Over a 26-month period, MSAFP tests were performed at Michigan State University for 21 392 women. Sera remaining after that testing were stored frozen. Of these, 22 case samples—from women with MSAFP levels greater than 3·0 multiples of the median (MOM) and pregnancies that ended in fetal loss—and 44 matched control samples—from women with MSAFP levels greater than 0·4 and less than 2·2 MOM and live births at term—were tested for B19 antibodies. None of the 66 samples was IgM positive, while 33 (50 per cent) were IgG positive. The presence of IgG was not significantly associated with case or control status (matched odds ratio=0·77, 95 per cent confidence interval 0·28–2·11). These findings are consistent with other studies indicating prior infection in approximately half of adults and suggest that elevated screening MSAFP levels, in the absence of other evidence of B19 infection, should not prompt B19-specific testing.