浸没燃烧技术处理高浓度有机废水研究

针对现阶段高浓度有机废水处理困难的问题,提出了一种基于浸没燃烧技术的处理方法,设计制作了1台浸没燃烧装置,并开展了高浓度有机废水浸没燃烧实验研究,探究了过量空气系数、二次风量、燃烧温度等参数对燃烧尾气中CO、NOx排放的影响,以及浸没深度、燃烧温度对高浓度有机废水COD去除的影响。实验结果表明:该工艺对高浓度有机废水中的有机物去除效果明显,温度在900℃以上,浸没深度达到20 cm时,COD去除率可达90%以上。该方法可作为废水处理设备,与生物法等处理技术联用,应用前景广阔。     

Quantifying public health benefits of environmental strategy of PM2.5 air quality management in Beijing–Tianjin–Hebei region, China

In 2013,China issued "Air Pollution Prevention and Control Action Plan(Action Plan)" to improve air quality.To assess the benefits of this program in Beijing-Tianjin-Hebei(BTH)region,where the density of population and emissions vary greatly,we simulated the air quality benefit based on Ben MAP to satisfy the Action Plan.In this study,we estimate PM_(2.5) concentration using Voronoi spatial interpolation method on a grid with a spatial resolution of 1 × 1 km~2.Combined with the exposure-response function between PM_(2.5) concentration and health endpoints,health effects of PM_(2.5) exposure are analyzed.The economic loss is assessed by using the willingness to pay(WTP) method and human capital(HC) method.When the PM_(2.5) concentration falls by 25% in BTH and reached 60 μg/m~3 in Beijing,the avoiding deaths will be in the range of 3175 to 14051 based on different functions each year.Of the estimated mortality attributable to all causes,3117 annual deaths were due to lung cancer,1924 – 6318 annual deaths were due to cardiovascular,and343 – 1697 annual deaths were due to respiratory.Based on WTP,the estimated monetary values for the avoided cases of all cause mortality,cardiovascular mortality,respiratory mortality and lung cancer ranged from 1110 to 29632,673 to 13325,120 to 3579,1091 to 6574 million yuan,respectively.Based on HC,the corresponding values for the avoided cases of these four mortalities were 267 to 1178,161 to 529,29 to 143 and 261 million yuan,respectively.     

Pd-MnO2 nanoparticles/TiO2 nanotube arrays (NTAs) photo-electrodes photo-catalytic properties and their ability of degrading Rhodamine B under visible light

Pd-MnO_2/TiO_2 nanotube arrays(NTAs) photo-electrodes were successfully fabricated via anodization and electro deposition subsequently; the obtained Pd-MnO_2/TiO_2 NTAs photo electrodes were analyzed by scanning electron microscopy(SEM), X-ray diffraction(XRD) and characterized accordingly. Moreover, the light harvesting and absorption properties were investigated via ultraviolet–visible diffuse reflectance spectrum(DRS); photo degradation efficiency was investigated via analyzing the photo catalytic degradation of Rhodamine B under visible illumination(xenon light). The performed analyses illustrated that Pd-MnO_2 codoped particles were successfully deposited onto the surface of the TiO_2 nanotube arrays;DRS results showed significant improvement in visible light absorption which was between400 and 700 nm. Finally, the photo catalytic degradation efficiency results of the designated organic pollutant(Rhodamine B) illustrated a superior photocatalytic(PC) efficiency of approximately 95% compared to the bare TiO_2 NTAs, which only exhibited a photo catalytic degradation efficiency of approximately 61%, thus it indicated the significant enhancement of the light absorption properties of fabricated photo electrodes and their yield of UOH radicals.     

Influence of coagulation mechanisms and floc formation on filterability

Minimizing particles in water is a key goal for improving drinking water quality and safety.The media filtration process,as the last step of the solid–liquid separation process,is largely influenced by the characteristics of flocs,which are formed and controlled within the coagulation process.In a laboratory-based study,the impacts of the physical characteristics of flocs formed using aluminum sulfate on the filtration treatment of two comparative water samples were investigated using a photometric dispersion analyzer and a filterability apparatus.In general,the optimum dosage for maximizing filterability was higher than that for minimizing turbidity under neutral p H conditions.For a monomeric aluminum-based coagulant,the charge neutralization mechanism produced better floc characteristics,including floc growth speed and size,than the sweep flocculation mechanism.In addition,the charge neutralization mechanism showed better performance compared to sweep flocculation in terms of DOC removal and floc filterability improvement for both waters,and showed superiority in turbidity removal only when the raw water had high turbidity.For the different mechanisms,the ways that floc characteristics impacted on floc filterability also differed.The low variation in floc size distribution obtained under the charge neutralization mechanism resulted in the flocs being amenable to removal by filtration processes.For the sweep flocculation mechanism,increasing the floc size improved the settling ability of flocs,resulting in higher filter efficiency.     

基于遗传神经网络的除湿机故障诊断与寿命预测

目的识别除湿机的性能状态和预测吸附剂的剩余寿命。方法针对除湿机故障过程缓变的特点,提出一种基于数据驱动的遗传神经网络模型。首先,为解决设备失效程度划分模糊的问题,由5个热力参数组成反映吸附剂劣化程度的特征向量,关联分析得到除湿机的5类故障模式。其次,利用遗传神经网络建立状态参数和故障模式的映射关系。最后,对表征设备吸附能力的主参数进行外推预测。结果训练好的诊断网络可准确地识别出设备的劣化程度及其演变过程,预测网络的预测精度非常高。结论该方法可有效地实现对除湿机的故障诊断与预测。。     

重庆市突发环境事件时空格局及影响研究

基于2009年-2015年重庆市突发环境事件统计数据,研究了重庆市近7年突发环境事件的动态变化趋势、空间分布格局及污染影响特征,讨论了引发突发环境事件内外部因素之间的关系.结果表明:重庆市7年内共发生突发环境事件134起,且呈波动下降趋势,春季和夏季为交通事故和自然灾害高发期;突发环境事件空间上主要集中在主城九区及相邻的区县,渝西、渝东南及渝东北各区县发生次数较少.道路交通事故、设备故障和操作不当是导致突发环境事件的主要因素,主要发生形式为泄漏.污染类型主要为水污染和水气复合污染,污染物出现频率大小为:油类>酸碱类>液氨>苯及其化合物>减水剂>其他各种污染物.     

高校大学生环保意识培养与生态文明建设研究

通过基于大学生环保意识培养与生态文明建设研究,利用广东省环境保护工程职业学院等5所在校职业学院大学生调查数据,对目前职业学院大学生生态文明素质现状及生态文明教育开展情况进行描述分析,研究发现对生态文明教育存在缺位现象;生态实践行为有待提高.同时,利用SPSS统计应用软件对大学生的生态文明认知、生态意识、生态实践行为与大学生的信息情况进行相关性分析,找出影响大学生生态文明素质的因素,提出了提升大学生生态文明素质的途径和方法.     

油箱明火烤燃下燃爆危险性分析与安全对策

为预防交通事故中油箱燃爆危险的发生,利用摄像机、高速照相机和红外热成像仪观测油箱在烤燃过程中的燃爆特性,得到爆炸火球参数和油箱内部温度变化,并针对油箱烤燃的危险性,利用爆炸火球辐射总能量和热剂量来评判热效应严重程度。结果表明:明火烤燃状态17min左右,油箱发生爆炸;爆炸火球的体积、表面最高温度和辐射总能量分别为150.46m~3、1 490.4℃和2.10×10~4kJ,距爆炸火球中心1m、5m和10m处的热剂量分别为1 978.8kJ/m~2、99.4kJ/m~2和25.1kJ/m~2。最后,从油箱本质安全设计和点火源控制方面提出了相应的安全对策与措施。     

LNG储罐安全阀泄漏分析与故障排查

针对16×10~4m~3LNG储罐安全阀泄漏问题,从阀门结构角度对泄漏原因进行了详细的分析,认为主要有三种可能:(1)导阀失效;(2)上阀腔漏气;(3)阀座密封不严。根据分析结论,提出了故障排查的方法以及操作步骤;结合阀门解体检查情况,建立了阀门失效的故障树,从投产、阀门运行维护角度提出了相关建议。     

酸性水储罐安全性研究

为预防酸性水储罐气相空间闪爆事故的发生,取样分析了某炼厂酸性水罐气相空间组成,根据气相组成配制了3种混合可燃气体,利用5 L爆炸极限测试仪测定了混合可燃气体在不同氧含量条件下的爆炸极限,根据爆炸极限数据计算出3种混合可燃气体的极限氧含量。结果表明:随着体系中氧含量增加,爆炸上限明显升高,爆炸下限无明显变化;烃类物质含量高时,混合可燃气体的爆炸上下限均降低,爆炸极限宽度变小;硫化氢和氢气含量高时,混合可燃气体爆炸上下限均升高,爆炸极限宽度变大;3种气相组成的极限氧含量分别为:8.1%、9.9%和10.3%,为防止罐顶气相组成发生闪爆,建议氧含量浓度控制在4%以内,当氧含量浓度到达5%时建议启动氮气联锁进行惰化和稀释。