无线电引信电磁辐射能量耦合路径研究

目的为了确定外界电磁能量究竟如何进入到引信电路内部,针对无线电引信的电磁能量耦合路径进行系统研究。方法通过对多种引信进行不同形式的连续波、强电磁脉冲电磁辐照效应试验,对比引信天线、孔缝、弹体、电源模块等部位的能量耦合可能性。分析连续波、强电磁脉冲电磁环境对无线电引信作用的耦合规律。结果确定了电磁信号类型和引信接地结构是影响电磁能量耦合通道的关键因素,揭示了前门耦合是连续波电磁辐射环境的最主要方式。结论弹体或引信前端与电路共地的金属部件是强电磁脉冲辐射环境的主要能量路径,从而为无线电引信抗电磁性能加固的实施提供了有益参考。     

Comparison of quartz sand, anthracite, shale and biological ceramsite for adsorptive removal of phosphorus from aqueous solution

The choice of substrates with high phosphorus adsorption capacity is vital for sustainable phosphorus removal from waste water in constructed wetlands. In this study, four substrates were used： quartz sand, anthracite, shale and biological ceramsite. These substrate samples were characterized by X- ray diffractometry and scanning electron microscopy studies for their mineral components （chemical components） and surface characteristics. The dynamic experimental results revealed the following ranking order for total phosphorus （TP） removal efficiency： anthracite 〉 biological ceramsite 〉 shale 〉 quartz sand. The adsorptive removal capacities for TP using anthracite, biological ceramsite, shale and quartz sand were 85.87, 81.44, 59.65, and 55.98 mg/kg, respectively. Phosphorus desorption was also studied to analyze the substrates＇ adsorption efficiency in wastewater treatment as well as the substrates＇ ability to be reused for treatment. It was noted that the removal performance for the different forms of phosphorus was dependent on the nature of the substrate and the adsorption mechanism. A comparative analysis showed that the removal of particulate phosphorus was much easier using shale. Whereas anthracite had the highest soluble reactive phosphorus （SRP） adsorptive capacity, biological ceramsite had the highest dissolved organic phosphorus （DOP） removal capacity. Phosphorus removal by shale and biological ceramsite was mainly through chemical adsorption, precipitation or biological adsorption. On the other hand, phosphorus removal through physical adsorption （electrostatic attraction or ion exchange） was dominant in anthracite and quartz sand.     

电絮凝净化含聚污水影响因素研究

目的为保障油田正常安全生产,促进油田含聚污水的循环利用。方法采用电絮凝技术单因素研究方法开展净化含聚污水的静态实验研究,探讨外加电流密度、极板间距、初始pH及聚合物浓度等因素对净化效果的影响规律。结果当初始pH为7.0,电流密度为4.0 m A/m2,极板间距为1.0 cm,电解16 min时,综合处理效果最佳。此时,含油量与浊度去除率分别为98.85%,99.93%,处理每克油平均消耗为0.0494 g的Al,处理每立方米含聚污水的能耗为0.2895 k Wh。污水中的聚合物浓度越小,净化效果越好。结论中性处理,极板间距为1.0 cm,外加电流密度为4.0 m A/m2,通电16 min是最佳处理条件。     

Comparison of using polyurethane foam passive samplers and tree bark samples from Western China to determine atmospheric organochlorine pesticide

Polyurethane foam(PUF)passive samplers were deployed and tree bark samples were collected at 15 sites across western China in 2013,and the organochlorine pesticide(OCP)concentrations in the samples were determined.Dichlorodiphenyltrichloroethane and its degradation products(collectively called DDTs),hexachlorocyclohexanes(HCHs),and hexachlorobenzene(HCB)were the dominant OCPs in the PUF samples and tree bark samples.The mean DDTs,HCHs and HCB concentrations were 33,22 and 18 ng/sample in the PUF samples,and 428,74,and 43 ng/(g lipid weight(lw))in the tree bark,respectively.The OCP concentrations in the air,calculated using PUF–air and tree-bark–air partitioning models,were of the same order of magnitude.Both sample types showed that relatively fresh inputs of DDT and HCHs to the environment have occurred in western China.Meanwhile,PUF passive samplers were compared with the use of tree bark samples as passive samplers.The OCP compositions in the PUF and tree bark samples were different.Only the relatively stable OCPs(such as HCB,β-HCH and p,p′-dichlorodiphenyldichloro-ethylene(DDE))were consistent in the PUF and tree bark samples.     

缙云山3种典型森林降雨过程及其氮素输入

选取重庆缙云山的常绿阔叶林、毛竹林和针阔混交林为研究对象,于2012年5~10月对大气降水、穿透雨和树干径流等降水过程及其氮素输入进行研究.结果表明:①研究期间总降雨量564.88 mm,常绿阔叶林、毛竹林和针阔混交林的穿透雨量占总降雨量的比例分别为74.0%、85.0%和71.6%,且树干径流量所占比例分别为1.9%、10.3%和1.6%;3种林分的穿透雨量、树干径流量与林外降雨量之间均呈显著的线性关系(P<0.05),且穿透雨率、树干径流率与林外降雨量之间都呈对数关系(P<0.05).②与大气降水相比,穿透雨和树干径流的NO-3和NH+4浓度要高,且3种林分的大小关系为针阔混交林>常绿阔叶林>毛竹林;穿透雨和树干径流的总无机氮输入量(以N计)分别为针阔混交林(18.93 kg·hm-2)、常绿阔叶林(14.93 kg·hm-2)和毛竹林(15.31 kg·hm-2).③3种林分的无机氮输入量与穿透雨量、树干径流量之间均呈显著的线性关系(P<0.05).     

基于支持向量机的湖泊生态系统健康评价研究

利用支持向量机在处理分类问题、小样本问题和泛化推广方面的优势,构建了基于支持向量机的湖泊生态系统健康评价模型.同时,对广州市最大的人工湖——白云湖的水质及生物群落情况进行了监测,最后运用该模型对白云湖生态系统健康状况进行了评价.评价结果表明,白云湖生态系统处于病态状态,不能达到其净化水质的设计作用.建议从提高进水水质、实施湖区截污和丰富生物量3方面改善白云湖生态系统健康水平.与传统熵权综合健康指数法和熵权模糊综合评价法相比,所建模型更加客观、科学地评价了湖泊生态系统健康状况,能够为湖泊生态系统健康管理提供一定依据,具有广阔的应用前景.     

Arbuscular mycorrhizal fungal phylogenetic groups differ in affecting host plants along heavy metal levels

Arbuscular mycorrhizal fungi（AMF） are important components of soil microbial communities,and play important role in plant growth. However, the effects of AMF phylogenetic groups（Glomeraceae and non-Glomeraceae） on host plant under various heavy metal levels are not clear. Here we conducted a meta-analysis to compare symbiotic relationship between AMF phylogenetic groups（Glomeraceae and non-Glomeraceae） and host plant functional groups（herbs vs. trees, and non-legumes vs. legumes） at three heavy metal levels. In the meta-analysis, we calculate the effect size（ln（RR）） by taking the natural logarithm of the response ratio of inoculated to non-inoculated shoot biomass from each study. We found that the effect size of Glomeraceae increased, but the effect size of non-Glomeraceae decreased under high level of heavy metal compared to low level. According to the effect size, both Glomeraceae and non-Glomeraceae promoted host plant growth, but had different effects under various heavy metal levels. Glomeraceae provided more benefit to host plants than non-Glomeraceae did under heavy metal condition, while non-Glomeraceae provided more benefit to host plants than Glomeraceae did under no heavy metal. AMF phylogenetic groups also differed in promoting plant functional groups under various heavy metal levels.Interacting with Glomeraceae, herbs and legumes grew better than trees and non-legumes did under high heavy metal level, while trees and legumes grew better than herbs and non-legumes did under medium heavy metal level. Interacting with non-Glomeraceae, herbs and legumes grew better than trees and non-legumes did under no heavy metal. We suggested that the combination of legume with Glomeraceae could be a useful way in the remediation of heavy metal polluted environment.     

受污染原水中有机物去除中试集成系统的工艺对比研究

在中试集成系统水平上对比研究了常规工艺、预臭氧化工艺、粒状活性炭吸附工艺、臭氧-生物活性炭工艺对受污染源水中的有机物及消毒副产物前体的去除效果.结果表明,前2种工艺对有机物的去除效能大致在50%～60%,后2种则能达到75%～90%.与前2种相比,后2种为更有效地去除受污染原水中有机物的方法.建议采用Ⅱ类及更优水体为水源的水厂考虑使用常规处理或季节性水质变化时采用预氧化工艺;而对于那些以Ⅲ类或更差水体为主水源的水厂则应考虑增设GAC或BAC设备,以满足饮用水水质新标准要求.     

活性污泥对四环素的吸附性能研究

通过批量平衡法研究了四环素在活性污泥上的吸附行为.结果表明,污泥混合液浓度和四环素初始浓度对吸附平衡时间、污泥吸附量和污泥吸附率均有较大影响.伪二级反应动力学模型较伪一级反应动力学模型更符合本吸附实验.在10、25℃条件下,四环素在活性污泥上的吸附行为较符合Langmuir模型,最大吸附量分别是31.14、70.95 mg.g-1;在40℃下,符合Henry模型.应用D-R模型判定吸附类型,10℃(平均吸附能为9.13 kJ.mol-1)下,化学吸附占主导;40℃(平均吸附能为7.07 kJ.mol-1)下,物理吸附占主导.温度升高,污泥对四环素的吸附能力增大.离子交换是四环素在活性污泥上吸附的一种机制.四环素的初始浓度为5、10、20 mg.L-1,钠离子浓度由0 mol.L-1增加到0.1 mol.L-1时,吸附量分别下降15.32%、15.00%、20.12%.当pH在5～10之间时,pH为6的条件下污泥对四环素的吸附量最大.     

工业园区恶臭污染源排放特征和健康风险评估

为了深入了解工业园区恶臭污染情况、保障工业园区工作人员的工作环境安全,以珠海市某工业园区为分析对象,采集园区内涉及8种行业类型、14个工业恶臭源的主要工艺流程中通过有组织方式排放的恶臭废气,分析了14个排放源的恶臭VOCs排放特征,测定了感官臭气浓度,应用理论臭气强度法确定了各排放源的特征恶臭物质,并对各排放源的恶臭废气进行了致癌和非致癌风险评估.结果表明:①14个排放源排放的物质种类相同、含量差异较大,纤维和电池制造及烃类、酸酐、酯类和溶剂合成的恶臭VOCs排放以烷烯烃为主;炼油源、PTA合成源和乳胶合成源废气中苯及苯系物含量最高;酯类化合物是活性炭加工、树脂合成源和喷涂源废气排放的主要物质;陶瓷制造源和添加剂合成源排放的废气以羰基化合物和硫化物为主;②14个排放源的废气均具有较为强烈的感官刺激性,润滑油添加剂合成和乳胶类合成排放的废气感官刺激性最严重.其中,添加剂合成源的特征恶臭物质为乙硫醇、乙硫醚、正丁醇和甲苯,乳胶合成源的特征恶臭物质为苯乙烯、丙苯、异丙苯、丙烯酸丁酯和1,3-丁二烯;③14个排放源恶臭废气的终生致癌风险LCR值范围为3. 06×10-7～1. 06×10-2,其中炼油源、PTA合成源、酯类合成源和乳胶合成源排放废气存在较大潜在风险;非致癌风险HI总值范围为0. 02～51. 66,其中乳胶合成、酯类合成、炼油、PTA合成和纤维制造存在一定的非致癌健康风险.乳胶合成源、酸酐合成源和树脂合成源厂界均存在潜在致癌风险.