无硫膨胀石墨的制备及吸油性能

通过单因子实验考察了无硫膨胀石墨制备过程中氧化剂及插层剂用量、氧化反应及插层反应时间、氧化反应及插层反应温度对无硫膨胀石墨膨胀体积的影响。通过正交实验确定了制备无硫膨胀石墨的最优条件是:石墨(g)∶浓硝酸(mL)∶30%H2O2(mL)∶乙酸酐(mL)=1∶2.25∶0.25∶0.6,在30℃条件下氧化反应60 min,加入插层剂后在60℃条件下插层反应90 min,此条件无硫膨胀石墨的膨胀体积达317 mL/g使用XPS、FT-IR、XRD和SEM对无硫膨胀石墨进行了表征并对其吸油性能和再生性能进行了研究。结果表明,所制备无硫膨胀石墨对原油和柴油的最大吸附量分别为66.3 g/g和62.7 g/g。吸附原油后的无硫膨胀石墨抽滤再生后首次再生率为49.1%,原油的回收率为64.5%。     

利用剩余活性污泥生产一次性可降解材料

为了缓解污水处理厂日益严重的污泥处置难题,实现剩余活性污泥的无害化、减量化、稳定化、资源化利用。采用SBR系统对剩余活性污泥进行10 d的驯化,加入4.0 g/L的乙酸钠作为发酵培养基碳源和前体物质,累积聚羟基烷酸酯(polyhydroxyalkanoates,PHA)。30℃好氧发酵10 h后,PHA积累达1 125 mg/L,占污泥浓度(MLSS)的质量分数为35.7%。然后经过离心、烘干、粉碎后模压成型加工成一次性使用的可生物降解材料。使用正交实验进行优化,结果表明:其最佳的物料配比和模压条件为:干污泥57%;稻草纤维20%;聚乙烯醇(PVA)19%;硬脂酸钡2%;氧化钙2%;最佳工艺条件为100℃,加热1.5 h,此时加工出来的产品具有最优的抗压强度和拉伸强度。以本方法制成的可生物降解花盆其所含细菌总数、粪大肠菌群、蛔虫卵死亡率均达到国标所规定的污泥农用生物安全要求;另外,试样中未检出病毒;其重金属含量也达到国标所规定的污泥农用标准;其可生物降解性能达到了可降解材料的要求。因而本研究制备的一次性使用可降解花盆具有较好的开发和应用价值。     

Fenton 法降解抗生素磺胺间甲氧嘧啶钠

应用Fenton高级氧化技术降解水溶液中抗生素磺胺间甲氧嘧啶钠(SMMS),系统探讨了起始pH、CSMMS、CFe2+、CH2O2和温度等因素对SMMS降解效果的影响。结果表明:CSMMS=4.53 mg/L,pH=4.0,CH2O2=0.49 mmol/L,CFe2+=19.51μmol/L,T=25℃为最佳反应条件。在最佳条件下,87.4%的SMMS可以在120 min内降解。反应动力学研究表明Fenton氧化降解SMMS分为两个阶段,快速反应阶段和慢速反应阶段,并建立了两阶段动力学模型,模型拟合结果较好。研究结果为含有SMMS的污废水处理提供了基础数据和科学参考。     

三元乙丙橡胶超细纤维复合膜的制备及其截留性能

以四氢呋喃和N,N-二甲基甲酰胺为溶剂,配制三元乙丙橡胶(EPDM)纺丝液,通过静电纺丝技术制备了EPDM超细纤维,进而以聚偏氟乙烯(PVDF)微滤膜为基膜制备了EPDM超细纤维复合膜。采用红外光谱(FTIR)和扫描电子显微镜(SEM)对EPDM超细纤维的结构和形态进行了表征。考察了复合膜对苯乙烯废水的截留效果和复合膜通量的变化情况。实验结果表明:EPDM超细纤维具有类似无纺布形式的多孔纤维网状结构,其直径在0.2~2.0μm之间;复合膜在操作压力为0.1MPa的条件下,处理质量浓度为100μg/mL的模拟苯乙烯废水,膜通量约为5.90mL/(cm2.h),苯乙烯去除率可达89.7%。     

我国电子废弃物回收体系建设的思路与保障措施

随着电子信息产业的高速发展和人民生活水平的不断提高,电子废弃物的数量也不断增长,成为21世纪增长最快的固体废弃物。从我国电子废弃物的回收利用现状入手进行分析,提出建设一套专业回收利用体系,形成以城市社区回收点为基础,中转交投中心为纽带,资源循环利用为目的,点面结合、三位一体的电子废弃物回收利用体系,逐步提高回收、集散、循环利用能力,促进行业健康、有序发展。     

Comprehensive assessment of toxic metals in urban and suburban street deposited sediments (SDSs) in the biggest metropolitan area of China

A set of toxic metals, i.e. As, Hg, Pb, Cd, Cu, Zn, Ni and Cr, in urban and suburban SDSs were investigated comparatively in the biggest metropolitan area of China, Shanghai. Results showed that all of the metals except As were accumulated greatly, much higher than background values. Geo-accumulation index indicated that metal contamination in urban SDSs was generally heavier than that in suburban SDSs. Potential ecological risk index demonstrated that overall risks caused by metals were considerable. Cd contributed 52% to the overall risk. Multivariate statistical analysis revealed that in urban SDSs, Zn, Ni, Cd, Pb, Cu and Cr were related to traffic and industry; coal combustion led to elevated levels of Hg; soil parent materials controlled As contents. In suburban SDSs, Pb, Cu, As and Cd largely originated from traffic pollution; Zn, Ni and Cr were associated with industrial contaminants; Hg was mainly from domestic solid waste.     

Ambient TSP concentration and dustfall in major cities of China: Spatial distribution and temporal variability

Based on environmental monitoring data in 93 major cities and meteorological records at 398 weather stations in China from 1981 to 2007, total suspended particle (TSP) concentration, the intensity of dustfall, and sand and dust storm frequency (F_d) were analysed. During the past 27 years, the annual average TSP concentration (C_TSP) in 93 cities was 402 μg m^?3. Annual average C_TSP decreased from the north to the south and from inland to the coast areas with a peak value of 628.8 μg m^?3 in Lanzhou. In the 1980s, 1990s and 2000s, annual average C_TSP was 628.7, 319.2, and 250.1 μg m^?3, respectively. Annual average intensity of dustfall (I_d) was 240.5 t km^?2 a^?1, decreased from northern to southern China and from inland to the coast areas with the maximum value of 717.2 t km^?2 a^?1 in Baotou. In the 1980s, 1990s and 2000s, annual average I_d was 334.8, 220.9, 146 t km^?2 a^?1 respectively. Annual average I_d in the Loess Plateau region was commonly higher than 200 t km^?2 a^?1. The annual average F_d decreased from arid regions in northwestern China to humid areas in southeastern China with two sand and sand storm centers existing in Xinjiang Taklamakan Desert and western Inner Mongolia. The annual average F_d in the 1980s, 1990s, 2000s was 16, 8, 6 days respectively, decreased steadily from 18 days in 1981–5 days in 2007. Annual average I_d had a positive linear relation to annual average C_TSP (R² = 0.96). Annual average F_d had a positive relation with annual average C_TSP (R² = 0.97) as well as annual average I_d (R² = 0.94). TSP was the chief pollutant influencing Air Pollution Index (API) in northern China in spring and winter seasons. Sand and dust storm might be a major factor affecting the temporal variability and spatial distribution of TSP and dustfall in China.     

颗粒物对无电压作用下离子交换膜分离去除铜离子的影响

在无外加电压条件下研究了颗粒物对阳离子交换膜分离去除铜离子效果的影响。选用硅酸、二氧化硅、氧化铝和水杨酸等4种物质作为颗粒物分别进行实验,其添加量均为50 mg/L。Cu2+及其补偿离子K+的浓度分别为0.0787mmol/L(5 mg/L)和0.787 mmol/L,水温为25±1℃,搅拌强度为600 r/min,水力停留时间为12 h。在所述实验条件下运行96 h后,水中无颗粒物干扰时,铜离子去除率为84%;水中存在带负电荷颗粒物(硅酸)和不带电荷颗粒物(二氧化硅和氧化铝)时,铜离子去除率略为下降至81%;而当水中存在带正电荷颗粒物(水杨酸)时,铜离子的去除率进一步下降为79%。研究结果表明带正电荷颗粒物对铜离子的交换去除影响较带负电荷或不带电荷颗粒物大,因为带正电荷颗粒物更易迁移至阳离子交换膜表面甚至进入膜内,并与膜表或膜内离子交换基团结合,从而导致铜离子交换去除明显下降。     

脱硫灰与钾矿石复合生产钾钙硅镁硫肥料研究

对脱硫灰与钾矿石复合生产钾钙硅镁硫肥的研究意义、反应原理、生产流程、环境安全性能以及施肥方法等进行了介绍和评估,并对其应用前景进行了展望。研究结果表明:利用脱硫灰与钾矿石复合生产钾钙硅镁硫肥在理论上可行;生产出的产品中硫酸钾的含量达10.34%～12.0%,枸溶氧化钙19.06%～32.28%,枸溶二氧化硅10.98%～14.46%,枸溶氧化镁1.46%～1.82%。产品的pH值从原脱硫灰的10.65下降到9.60。重金属含量低于农用粉煤灰国家标准,生产过程中不会产生SO2等有害气体污染。肥料的生产成本低于350元/t,该肥料不但可以增加土壤中钾、钙、硅、镁和硫等中微量元素的含量,而且可以提高或改善农作物的产量和品质。达到变废为宝,促进循环经济发展之目的。     

Simultaneous adsorption and degradation of Zn2+ and Cu2+ from wastewaters using nanoscale zero-valent iron impregnated with clays

Clays such as kaolin, bentonite and zeolite were evaluated as support material for nanoscale zero-valent iron (nZVI) to simultaneously remove Cu²⁺ and Zn²⁺ from aqueous solution. Of the three supported nZVIs, bentonite-supported nZVI (B-nZVI) was most effective in the simultaneous removal of Cu²⁺ and Zn²⁺ from a aqueous solution containing a 100 mg/l of Cu²⁺ and Zn²⁺, where 92.9 % Cu²⁺ and 58.3 % Zn²⁺ were removed. Scanning electronic microscope (SEM) revealed that the aggregation of nZVI decreased as the proportion of bentonite increased due to the good dispersion of nZVI, while energy dispersive spectroscopy (EDS) demonstrated the deposition of copper and zinc on B-nZVI after B-nZVI reacted with Cu²⁺ and Zn²⁺. A kinetics study indicated that removing Cu²⁺ and Zn²⁺ with B-nZVI accorded with the pseudo first-order model. These suggest that simultaneous adsorption of Cu²⁺and Zn²⁺ on bentonite and the degradation of Cu²⁺and Zn²⁺ by nZVI on the bentonite. However, Cu²⁺ removal by B-nZVI was reduced rather than adsorption, while Zn²⁺ removal was main adsorption. Finally, Cu²⁺, Zn²⁺, Ni²⁺, Pb²⁺ and total Cr from various wastewaters were removed by B-nZVI, and reusability of B-nZVI with different treatment was tested, which demonstrates that B-nZVI is a potential material for the removal of heavy metals from wastewaters.